Toshiba 40kv700b problems turning on the TV.

Similar Questions

• Problem turning on the Satellite Pro S500 without battery

  Hello!

  I have the following situation with my Satellite Pro S500-115:

  The battery seems to be faulty now (it loads more and Win 7 Pro told me to replace it).
  When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  But even if I remove the battery and the laptop connected to the DC IN, when I press the turn on button have nothing happens!

  If the laptop should not be able to operate in such circumstances, which is only connected to the electric network and with the connected battery off? I have to set in order to operate like this?

  Thanks in advance!

  > The battery seems to be broken now (it loads more and Win 7 Pro told me to replace it).
  > When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  My old laptop battery is dead too much 6 years It's possible to use the laptop in the dough mode for just two minutes after the battery is empty, but I use the notebook with the AC adapter connected and that is why I don't need to replace the battery.

  > Shouldn't the laptop be able to operate in such circumstances, that is only connected to the electric network and with the battery connected off? I have to set in order to operate like this?

  Usually the laptop should be able to turn on and operate without battery connected.
  My laptop works fine with an adapter connected only. So what to say maybe the ESF is also affected, but it's just a suggestion

  But you must check if the BIOS is in place to this day... sometimes a BIOS update could solve some problems of power and battery.

• Problem turn off the PC and reboot

  HI, I ve a laptop Toshiba Satellite Pro M30 with Windows XP PRO and every time I restart or turn off the PC, a window pops up saying: "end program-sample, this program is not responding" and every time I have to click "end now" If someone could help me I will be very grateful. Thank you very much and sorry for my english.my email address is [email protected]

  Hello

  I found an ad on the same question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5892&MessageID=20224

  This happens if some different applications in the background and can not be disabled. In my opinion, you should check the background process and stop it manually.

• Screen Toshiba Innovation by turning on the Satellite P770

  Hello

  I have an older P770 of 2 weeks.
  Last week the laptop off itself all of a sudden.

  I was a very hot day - I don't know if this had anything to do with it? It seemed very warm.
  I put on the fan next to the laptop and realized the fan to the vents. I use the laptop on a table. When I turned it on I got the Toshiba Innovation screen and down the bottom it says press to enter together to the top or enter the boot menu.

  I press F2, nothing happens. I press F12, nothing happens. I press CTRL F2 F2 SHIFT, ALT F2, etc. etc. etc.
  I gave up and turned off the laptop has waited a while and turn it back on.
  I did it a couple of times and finally he went into what looked like to the start menu and I followed the instructions.

  Now, this happened to me a few times in the last 2 weeks-, but only when I completely stop the day before.

  Now her he does not again this morning and its driving me crazy. Help, please!

  There is an entry in the Knowledge Base of Toshiba by updating the bios as of 16/02/12 about the improved satellite fan control (not given models) and there is an update of bios v1.8 dated 14 / 02 / 12. What is the solution?

• Satellite A300 - control press the button Mute and didn't turn on the light

  I just bought Satellite A300-U01... Well I've seen other A300 their first touch multimedia keys works at the TURN of the lights on the laptop as well. My works for MUTE.

  How can I change?
  I check in Toshiba sat down he gives to option 1 of Mute another for DVD?

  Hello

  He is an Australian series. Am I wrong?
  I put t know if this is possible on the Australian series laptop.

  On Toshiba A300 European notebook, you can change the configuration of the pushbuttons
  If you want to assign another feature so you can set it new Toshiba control button. Check you Toshiba Assist-> Optimize-> Toshiba button support

  In addition, go to Toshiba HWSetup and turn on the light.

  Welcome them

• game does not load after you turn off the flash of pepper

  I play a wgt golf game, the game said if I were haveng problems turn off the flash of pepper and I did it and now the game does not load happens to 77% it stops there. Ive been trying to find how to activate the pepper flash then maybe I can play the game but no luck. I can play the game on my other computer without any problem, please help

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

  Original title:

  Aloha!

  I have a Toshiba Qosmio x 775-3dv78 running Windows 7 Home Premium x 64.
  Similar to another old post here, I have an intermittent problem where the Toshiba Power Saver software is off the ODD (a Matshita UJ240EF - BD - RE) and I am unable to turn on the power.  To put the ODD back on, it's a matter of restarting (sometimes several times) until the STRANGE somehow turns on.
  Sometimes, when I do a hot or cold boot, a window opens asking me if I want Toshiba Power Saving technology to turn ON the ODD.
  I click 'Yes', but the drive remains switched off.
  I also try to use function - same key controls... The STRANGE remains turned off.
  Here are the "best":
  As described in the former post office, inside the Windows power settings, there is a slot layout titled "TOSHIBA Power Saver Settings v8.9.9.64".
  In this context, normally there is ONLY a framework for 'cooling method.  BUT only when the ODD is disabled, a second parameter appears to "Optical Drive Power".
  Change that on ONE for battery and plugged in fact NONE no difference... The STRANGE remains OFF!
  Toshiba support is of no help.  Their answer to this problem is to run a 'Mr Fixit' which I discovered just unrecognized devices and then removes the upper and lower filters for the reader.  This "difficulty" might work from time to time... when it does, the ODD is somehow transformed into a 'removable' instead of one device ATA device.
  But then in a few days, the STRANGE turns off again.
  Something different maybe notable, I found after that I continued services and the related process, programs is that the version number on the Toshiba modules show "8.9.6" - not the "8.9.9.64" in the window Power Options.
  And before you ask (LOL!) what's happening on a soft reinstallation of the operating system by the media of recovery Toshiba with all Windows 7 updates applied.
  While I'm waiting for a possible response, I'll do the following:
  Uninstall and reinstall all THE software Toshiba provided duty with the STRANGE (energy saving, combustion, players, etc.)
  I will also shoot material part and make sure that the STRANGE is well inserted in the connector (IDE?) and that the connector is firmly attached to the motherboard.
  IF who does things, I'll update this message and inform you all.
  Otherwise, any ideas would be GREATLY appreciated!
  Mahalo!

  Hello

  Method 1:

  Run the electrical troubleshooting utility and check.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  I suggest you to change the power settings and check.

  a. click the Start button, type Power Options in the search field and then click on Power Options in the list of results.

  b. click on Change Plan settings for power management already select.

  c. other click on change advanced power settings

  d. expand TOSHIBA Power Saver Settings Vxxxxx and change the optical drive power managementsettings.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• How to turn off the Toshiba Hotkeys properties?

  How to turn off the Toshiba Hotkey properties so that I can install Microsoft Money? I get a message telling me that the installation cannot continue because the properties of the shortcut keyboard Toshiba is running, but I don't know how to turn it off, or when it is!

  Hi coxrhu,

  the fastest way to stop hot keys is to remove the Hotkey Services in the Windows startup process.

  Launch msconfig, look at "Startup" and search for "00Thotkey" and "000StTHK".
  This programs are normally responsible for the service.

  Hope this helps
  I will assume no responsibility for accidents to your system or loss of data.

  BR

• Turn off the problem on Satellite Pro A210

  I'm having a problem with my Satellite Pro A210, running on XP. It seems to turn off without reason. I don't think it's a problem of overheating as it can sometimes after only a few minutes of use, and can stay on the day without problem. It is as if he goes into hibernation, although the blue power light remains on, but cannot be restarted without turning off the power and then walk back.

  Someone at - it ideas? Thank you.

  Hello

  could you please tell me the following things:

  1. which modelnumber does your machine have? (you can check on the nameplate on the bottom of the machine)
  2. what version of BIOS is installed?

  Welcome them

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.