TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

Similar Questions

• Optical disc drive has stopped working on the Satellite a series

  My 10 year old son has a Toshiba laptop that he uses to play CD games, watch DVDs, etc.
  A few days ago he complained that he can no longer play its CD and DVD s.

  When I checked it, I found that the PC DVD R/RW e drive is full when I right click on it and open properties. It says 0 bytes remaining and the pie is complete without space. I don't know what happened, so is my son. You see, I'm not good with this stuff, please someone tell me what to do. Thank you...

  Moreover, our laptop is only a half a year old. It was purchased new.

  Hello

  To be honest I'm not quite sure what happened but maybe it s m just a problem of windows registry.

  First of all I recommend you to remove the CD/DVD Device Manager drive.
  Then leave the appliance Manager and start recording (in RUN type regedit).

  There, you have to completely remove the Upperfilters and Lowerfilters from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After restarting the device, wait for Windows to recognize the CD/DVD drive and retest the CD/DVD drive

  See this for more details:
  http://support.Microsoft.com/kb/270008/en-us

• Re: Satellite L500D - cannot get the optical disc drive to work

  Back again with this problem and this thread began again as it appears the original thread has been 'locked' ~ been awhile so it is aceptable.

  I think that the TS-L633C TSST DVD/CD RW on my system is in fact die slowly, now I can not yet use Toshiba DVD PLAYER to watch DVDs. See http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=204206#204206 for the story.

  Using the windows tool "FixIt" on a blank DVD got all green ticks OK but when I went to play DVDs ~ nothing!

  How the reader '' hunt '' when I put any DVD in it and then fails, suggests that the reader was not not little by little and I must be looking for a new. Shame really, because I haven't used at all, hence the long time between my responses on this forum.

  So OK, where from here.

  Nearest service center is a 5 hour drive, and I will send this laptop for my financial and other stuff done busy resourses is more allow me to simply replace this system and start from scratch.

  I'm ready to buy another drive, but cannot locate any online (new) and I am not aware if there are other brands / types which would be appropriate.

  Toshiba Satellite L500D-PSLKOA-00U009 - TSST TS-L633C DVD/CD RW

  Any ideas anyone?

  To be honest, the situation is strange to me, and I think that you spent too long with all this.

  In my opinion, you have to manage fast. The fist issue is: either defective or not ODD?
  The reasons why it doesn't work with a Toshiba DVD player is not relevant at all. You can test it with VLC media player to see how it works.

  So I recommend you to follow:
  You should not change your preinstalled operating system that you use for work or anything else. Try to get another HARD drive. Swap and install the OS by using recovery disc. Test the functionality of the WEIRD with the settings to be sure that the problem persists or not.

  In the end, if you are willing to trade the player s check Manual of use and you will be find the list of all compatible optical disc readers you can use with your model of laptop.

• Alienware Area 51 R2 (end of 2014) ejection of the optical disc drive does not

  New Alienware Area 51 R2 (end of 2014) happened the month last in January 2015. Not tried any DVD or Blue-ray until yesterday. The optical drive eject button does not work in windows pro 8.1, but soft eject works in click with the right button on the drive and select "eject". The button works also before starting Windows start. I invited it must be a software problem and could be fixed by updating some drivers. But I googled a lot and can't find solutions for other Alienware models, but not for the Office of area 51 R2.

  Bluetooth also does not work, but fixed with a new driver from Intel.

  Install the driver from the disk...

• Satellite A210 - 1 4 do not recognize the optical disc drive

  I have a satellite A210 - 1 4 who recognize the strange.
  The drive has power and running disks but does not appear as a drive in MY COMPUTER.

  It is also not recognized in the Bios.
  I updated the Bios and tried to install the firmware but the message that the drive is not found.

  I tried in another computer and it works fine.
  If anyone has had similar problems, and is there a solution?

  Thank you very much

  > I tried in another computer and it works fine.
  You have tested optical drive in another computer?
  In any case, if the STRANGE is not recognized in the BIOS I'm afraid controller ODD m is defective. It comes to the motherboard so there is not some sort of easy solution.
  I don't think you can do much except to swap the motherboard.

• Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

  Hello

  the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
  The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
  risk to get damaged?

  I would be very grateful for each tip and all the help guys can give me!

  Best regards
  a.z.

  Hello

  In various cases the ODD replacement is very delicate.

  If you wish, you can consult this forum category.
  Here you will find some videos how to replace the ODD on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

  This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
  http://www.YouTube.com/user/toshibaeuropesupport

  But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
  But make sure that this!

• Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

  Hello

  I have a problem with eSata HARD drive. I have a toshiba Stor.E D10, 1, 5 to external HDD. When I plug it into the connector back eSata, Windows 7 recognize this and I can read it, but when I try to write about it, it freezes and I have to unplug it. When I connect the Toshiba Stor.E D10 with the USB cable, everything works fine. The problem is when I use the eSata connector. I have updated the BIOS to the latest without any improvement. In the BIOS, I tried esata IDE and AHCI controller without success.

  My system: Windows 7 64 bit Ultimate, card mother Gygabyte GA-X58A-UD3R(rev. 2.0)

  Any help is happy.
  Thank you

  Javier,

  Hello

  Did you check and test the drive external DRIVE with other computers that provide the eSATA interface?
  I think that this should be done because theoretically the problem might be related to the laptop s / s computer eSATA port.

• can not find the driver and I am unable to print the docs

  I have an officejet J6400 printer and can't print all of a sudden.  I am getting an error on my GhostGX990 in the properties. Never had a problem before. Any suggestion would be appreciated. Thank you.

  Hi Ronlazar,

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Download Driver: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3635388&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3635376&taskId=135

  Slow / no response from the printer
  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3635376&prodTypeId=18972&supportTaskId=42461

• Portege R700 - how to replace the optical disk drive?

  Hello
  I would like to replace the optical disc drive (ODD) with a Solid State Drive (SSD) on my Portege R700.
  So my first question is: what is the way to remove the STRANGE?

  And my second question is: can I replace it with a Caddy drive HARD ICY BOX IB-AC642 or Akasa AK-OS2SSA-BK?
  Interface SATA caddy fits with the WEIRD interface?

  Thank you for your answer

  Hello

  It s really complicated because the STRANGE is placed inside and remove it you must remove all the screws that fix the bottom cover.

  I wouldn't, because you will lose the warranty.
  More I doubt you could get the second HDD to work in ODD Bay.
  I think that this is not supported
  Just the laptop s as Portege M400, M700, M750, Tecra M9, S3 or S4 with a select Bay slim support would treat the 2nd HDD instead of ODD.

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How to disable the turn off the sound notification of Power Saver?

  Although I configured 'notification text' for the low battery level in energy of toshiba power save options, there is an audible alarm. Is it possible to disable the acoustic alarm?

  Hello

  This should be possible. Have you checked Toshiba Power saver settings?
  You can change the option called 'Method of Notification' of 'Sound + Message' only 'message' or 'no action '.

  PS: What laptop do you use?

• How can I turn off the monitor (e.g., "standby") via the command line at the push of a button (or any other shortcut need not additional software)?

  Hello

  I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
  However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.

  Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.

  On systems prior to Vista and 7, IIRC, running a command in the sense of:
  Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
  would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.

  Does anyone have an idea on how to do it on Windows 7?

  I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).

  Thank you for your help,
  NicApicella

  Hello

  Sleep is one thing and switching Off the Display is quite another.

  I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).

  Create a batch with the following script file:

  echo off

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1

  START/min/Wait C:\Windows\System32\scrnsave.scr s

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2

  with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.

  Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).

  For example, in my computer laptop m1 = m2 = 30 and 10.

  Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.

  Explanation of the script:

  The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
  The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.

  Kind regards

  Sushovon Sinha

• Receive the error message when you try to install Toshiba Power Saver

  Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

  For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.

  Hello

  where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
  When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

  Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
  Please, more details on your problem. :)

  Welcome them

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them