Toshiba 46TL968 cannot read the list of channels - only "hotel mode" appears

Similar Questions

• Cannot delete file: cannot read the source file or disk

  When you try to delete a specific folder which shows on the list, I get a dialog box saying: error deleting file or folder... Cannot delete file: cannot read the source file or disk

  Is the path to the really long folder?

  Any file or folder has a space beginning or end?

  Click Start, run, type cmd , and press ENTER to open a command prompt. In the command prompt...

  For a file test

  DEL \\.\driveletter:\path\filename

  For a test folder

  RD \\.\:\\
   
  If this doesn't help not please let us know the full path (and the name of the file if it is a file).

  Tricky

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• Oracle of the MAF error ' cannot read the DataControl uses on loadDataControl for the id:

  Need help!

  I created a simple SOAP web service for a remote database that works very well in 12 c WebLogic Server and also in the Jdeveloper HTTP Analyzer. When I use the same web service in the attached code, I get the following error (I've included output System.out.println in Ref. to the flow of the code) I use Jdeveloper 12 c MAF 2.0.0.0.41 on Mac OSx 10.9.

  Chk #0

  Processing line # 1

  Chk #1

  Chk #2

  [SEVERE - oracle.adfmf.framework - AmxBindingContext - loadDataControlById] Cannot read the DataControl uses on loadDataControl for the id: WLFNewActWS. [SEVERE - oracle.adfmf.framework - SynchronizationDC - syncDataFromOfflineToOnline] [Ljava.lang.StackTraceElement;@467c53d3

  @

  


  Sorry about that, I think I'm wrong you.

  OK, I created an example to test what goes wrong.

  1. server side, create a project named Employee_ws

  a. Department_ws.java

  public interface {Department_ws}

  public boolean addDepartment (a Department);

  }

  b. Department.java

  public class {Department

  public Department() {}

  Super();

  }

  int departmentId.

  String departmentName;

  locationId int;

  managerId int;

  {} public void setDepartmentId (int departmentId)

  this.departmentId = departmentId;

  }

  public int getDepartmentId() {}

  return departmentId.

  }

  {} public void setDepartmentName (String departmentName)

  this.departmentName = departmentName;

  }

  public String getDepartmentName() {}

  return departmentName;

  }

  {} public void setLocationId (int locationId)

  this.locationId = locationId;

  }

  public int getLocationId() {}

  return locationId.

  }

  {} public void setManagerId (managerId int)

  this.managerId = managerId;

  }

  public int getManagerId() {}

  return managerId;

  }

  }

  c. Department_impl.java

  @WebService

  / public class Department_impl implements Department_ws {}

  public Department_impl() {}

  Super();

  }

  @Override

  @WebMethod

  {} public boolean addDepartment (@WebParam (name = "arg0") a Department)

  If (Department! = null) {}

  int departmentId = department.getDepartmentId ();

  String departmentName = department.getDepartmentName ();

  int locationId = department.getLocationId ();

  managerId int = department.getManagerId ();

  Connection Conn;

  try {}

  Conn = ConnectionFactory.getConnection ();

  conn.setAutoCommit (true);

  Statement šment = conn.createStatement ();

  String inset_sql =

  "INSERT INTO dept (department_name, location_id, department_id, manager_id) VALUES ('+ '.

  departmentId + "," "" + departmentName + "'," + locationId + "," + managerId + ")";

  šment. Execute (inset_sql);

  Returns true;

  } catch (Exception e) {}

  System.out.println (e);

  }

  }

  Returns false;

  }

  }

  d. ConnectionFactory.java

  import java.sql.Connection;

  to import java.sql.DriverManager;

  import java.sql.SQLException;

  Connect to the database

  public class {ConnectionFactory

  public ConnectionFactory() {}

  Super();

  }

  protected static connection conn = null;

  public static connection getConnection() bird Exception {}

  If (conn == null) {}

  try {}

  String driver = "oracle.jdbc.driver.OracleDriver";

  String url = "jdbc:oracle:thin:@localhost:1521:orcl";

  User String = "employee";

  String password = "employee";

  Class.forName (driver);

  Conn = DriverManager.getConnection (url, user, password);

  } catch (SQLException e) {}

  System.Err.println (e.getMessage ());

  }

  }

  return conn;

  }

  public static {} Sub closeConnection()

  try {}

  If (conn! = null) {}

  Conn.Close ();

  Conn = null;

  }

  } catch (Exception ex) {}

  throw new RuntimeException (ex);

  }

  }

  }

  You can run Department_impl.java to start the Web service. i.e. http://127.0.0.1:7001 / Employee_ws-Client-context-root/Department_implPort? WSDL

  Server side sql:

  CREATE USER employee IDENTIFIED BY employee DEFAULT TABLESPACE users

  Temp TEMPORARY TABLESPACE

  Users WE QUOTA UNLIMITED;

  GRANT create employee to logon.

  GRANT alter used to logon.

  GRANT create any employee at table;

  GRANT create trigger employee TO;

  GRANT create any employee to view;

  GRANT create sequence employee TO;

  GRANT create synonym employee TO;

  GRANT create type employee TO;

  GRANT create employee to procedure;

  CREATE TABLE (DEPT

  DEPARTMENT_ID NUMBER (7, 0) NOT NULL,

  DEPARTMENT_NAME VARCHAR2 (50).

  NUMBER OF LOCATION_ID (7, 0),

  MANAGER_ID NUMBER (7.0)

  );

  2 create a mobile application of CRG named Dept

  

  a. Department.java (even for the server)

  b. SynchronizationDC.java

  import java.util.ArrayList;

  import java.util.List;

  Import oracle.adfmf.framework.api.AdfmfJavaUtilities;

  Import oracle.adfmf.framework.exception.AdfInvocationException;

  public class SynchronizationDC {}

  public SynchronizationDC() {}

  Super();

  }

  public void syncDataFromOfflineToOnline() {}

  It's just for testing, so I build Department manually instead of mobile db data, please replace in your business logic

  A Department = new Department();

  department.setDepartmentId (1);

  department.setDepartmentName("1");

  department.setLocationId (1);

  department.setManagerId (1);

  NamesList list = new ArrayList (1);

  List ParamsList = new ArrayList (1);

  List TypesList = new ArrayList (1);

  namesList.add ("arg0");

  paramsList.add (department);

  typesList.add (Department.class);

  try {}

  AdfmfJavaUtilities.invokeDataControlMethod ("Dept_WS", null, "addDepartment", namesList, paramsList,

  typesList);

  } catch (AdfInvocationException e) {}

  System.out.println (e);

  }

  }

  }

  c. new an AMX pag called Dept.amx

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  Text = "syncDataFromOfflineToOnline."

  Disabled = "#{!}" Bindings.syncDataFromOfflineToOnline.Enabled}"id ="cb3"/ >

  d. deploy on Android Simulator

  

  Click the button and a new record have been db insert through the webservice, search the remote db recording

  

  If above does not solve your problem, please let me know, thanks.

  Byron

• Bridge cannot read the format from my new camera RAW

  I just bought a new Sony SLT - A58 but bridge says that it cannot read the RAW format, so, I can't download my pictures.

  I went online and found an Adobe Camera Raw 6.7.1 and DNG Converter 7.4 plugins that supposidely would solve the problem. Nothing helps. Still refuse to recognize the RAW format.

  Desperate as it's my job to camera and and need it up and runing as soon as possible. I have had absolutely no problem with my older Sony A100.

  What's weird is that... If I pass the photos in the converter, it shows me the .dng pictures version, so something is there. Why the bridge can not see my RAW photos? ... and also, leave tons of caches and weird icons in the file, a real mess.

  I'm on Mac OS 10.6.8 platform (Snow Leopard) and using CS5... and Yes, all my programs and software are up-to-date.

  Thank you for your help...

  ... and happy new year

  So if the RAW support is specific, why do a plugin for CS5 and for my camera?

  Adobe has released versions of Adobe Camera Raw (ACR) immediately to ACR 1.0 (which was compatible with Photoshop 7). However, cameras supported varies according to the version of ACR and the version of the Adobe application.

  You must match:

  • your camera brand and model
  • the version of Camera Raw that takes in charge your camera brand and model
  • the specific version of Adobe software that supports the version of Camera Raw that you need.

  In your case, the Sony SLT - A58 was first based ACR 7.4 - which is only supported in CS6 and later versions. CS5 is not compatible with ACR7.4.

  Full list of supported devices is here

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  Applications of camera Raw compatible Adobe are listed here

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  CS5 is certainly not an antique and the A58 Sony isn't a huge technology Hasselblad. I have friends who have a large Nikon and Sony A77 and Canon and import their FIRST in their Bridge CS5.

  All that matters is that the specific camera corresponds with what version of ACR - and what applications are Adobe are compatible with this version of ACR.

  Can't comment on great Nikon or Canon mentioned above without specific camera model numbers.

  However, the Sony A77 is supported by ACR6.5 which is compatible with Bridge CS5 +. Easy to see why this combination works.

  Similarly, your Sony A100 was first supported by ACR 3.5, which is compatible with Bridge CS2 +. Easy to see why it works.

  Always read the tables linked above Adobe and cross with each other. That should clear up your confusion.

• RMAN-00565: cannot read the input BIA-01506 file: fflush() failed (return OSD

  Scheduled backups, TSM match times will fail with the following error
  ' RMAN-00565: cannot read the input file.
  BIA-01506: fflush() failed (OSD return value = 5). »
  
  And flooding the natural logarithm of exit with the following error
  
  ' RMAN-00558: error occurred during parsing of order entry.
  RMAN-01006: error scored during the analysis
  ' RMAN-00600: internal error, arguments [2012] [] [] [] [] "that leads to the FS is filled up to 100%.
  
  But backups are run successfully if start us it manually. Can someone help me with this

  You will need to set echo on inside your execution block.

  #!/bin/ksh
  . .env
  rman target=/ nocatalog log="${BKP_LOGS}/tsm_${ORACLE_SID}_ARCH_$(date '+%y%m%d@%H%M%S').log"
  run {
  set echo on
  allocate channel t1 type 'SBT_TAPE' parms
  'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_${ORACLE_SID}.opt)';
  backup archivelog all delete input;
  release channel t1;
  set echo off
  }
  

• How to open coloring that I downloaded to get to the final cut pro with it says: "cannot read the dictionary of the application or extension because it is not scriptable?

  Whenever I try to download the dyes or open, something pops up saying: "Cannot read the dictionary of the application or extension because it is not be scriptable." This has happened and I need to get it resolved. Help, please.

  What are pigments? What file format is it? Cam post you a screenshot of the window of information for it?

• iTunes cannot read the contents of the iPhone "iPhone 6 more»

  Please help because I can not backup my iPhone 6 Plus for my iMac and iTunes asks me to wipe it.

  When I connect the iPhone 6 Plus for the cable of the lightning, he says this: -.

  "iTunes cannot read the contents of the iPhone" IPhone Steve 6 + ".." Select the summary in the iPhone preferences tab and click on restore to restore the iPhone to factory settings. »

  The last back up, I've done was there a little more than 12 months and is an older version of iOS also so if I do a restore of the backup, it will be bad and lacks important information.

  Since then, I upgraded my iMac to El Capitan and updated my iPhone to iOS9.3.2 (just be updated to 9.3.3 now)

  System & software Specs are as follows:

  iMac 27 "V10.11.6 El Capitan (15G 31)

  iTunes V12.4.2.4

  iOS9.3.2

  Any help would be thank you very much.

  Please see the comment by David Lewis21 in this discussion of the CSA. I have not tested its solution, I can't vouch for it, and I have no other information. Try at your own risk. If you don't want to take that risk, I suggest that you contact the Apple Support.

• iTunes cannot read the contents of the iPod

  On a model MC540LL/A iPod running iOS 6.1.6 I get this alert:

  iTunes cannot read the contents of the iPod "IPod of Carl Carlson". Go to the summary in the iPod preferences tab and click on restore to restore the iPod to factory settings.

  There is no summary tab or the restoration.

  I have

  Restore all settings

  Erase content and settings

  along with several others that appear irrelevant.

  Which is appropriate?

  Thank you

  Connect your iPod to your computer and restore via iTunes

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  You can then restore the backup:

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272

• Cannot read the menu bar: menu mini opens instead

  When I select one of the menu options in the menu bar, an another mini window opens blocking the list of menu options. However if you move the mouse a little, it allows you to read the list of the menu. It is rather difficult to describe. It is easier to see a screen shot of it in action. It's infuriating as it makes it very difficult to choose anything.

  Hello Pochepoke, this is perhaps a problem with hardware acceleration - please try to update your video driveror where this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• Cannot expand the list of media in iMovie for Mac

  When you aye in the Multimedia show, you cannot expand the list box of the media on the left of the screen. Is this a bug? Thks

  Try dragging the lower left corner of the window to the left. Which somewhat widens the sidebar:

  I have to make the window larger than the screen iMovie to make the sidebar wider:

  

• cannot read the sd card. PCI device problem

  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  series of HP pavilion g4 laptop

  my laptop cannot read the sd card

  Hello

  What is the product/model of your computer? G4 something. The second driver on my very first post should work but why?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5093402 & sw_lang =

  Now, I need to know the product/model of your computer and its operating system. Please, use the following instructions to find out:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.

• Cannot read the contents of the phone

  My husband iPhone 6 has attracted 13 GB of data.  I use my phone more it does and I only use 6. Something has been bad for months, we have both called Verizon and nothing has helped. I'm trying to upgrade his phone now and iTunes tell if cannot read the content and I need to reset the phone.  I don't want to do it in case it is not completely saved.

  He was frustrated with his phone for months, may not have music on it, full, etc...

  I saw a solution in a similar thread, but did not want to download a 3rd party app to try to fix it.  Waiting for people to apple to help me understand this. Thank you!

  Please notify. Thank you!

  See if this thread (more old, but related) helps. ITunes cannot read the contents of the iphone

  If you're still using OS X 10.5.8. That being the issue. iOS 9 requires 12.3.x and this is the notability on OS X 10.5.8.

  -AJ

• Need help with TS to read the list of variables and/or LV

  Hello

  I use Labview adapter in Teststand to open WinIDEA and read the values of the variables. Basically LV lib files are used to read the value of the variable at run time, and returns the value of the variable. Contribution to this labview function i.e. variable name string and output type cluster.

  I need to read the list of variables and compare it to the value limits for each variable. I perhaps need to read at least 50 to 60 variables in one step if possible or a variable at a time in a loop. I want to add these variables in a txt file with the limits and read of Teststand as a string array and compare the result. In this way is easy to add or remove variables from the list and therefore their expected value. I tried to use the shipper of the property, but there need a stage name or local/global variable.

  Another way is to add the code in labview for comparison of variables value read, then I lose teststand power and flexibility.

  I am struggling to find the best way to achieve this. Any ideas?

  I would like it.  Basically, you have a file limit with 2 data tables.  A table contains your variables and the other your limits.  Then you wrap on a test of a string value.

  Let me know if you have any questions.

• Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.

  Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!

  I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
  I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!

  Hello

  1. where are the files located?
  2. are you able to open this file?

  This can happen if the file is used by some programs / demand or is corrupt.

  Follow these steps:

  Method 1: Check if you are able to delete the files in safe mode.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2: Ownership of files and check if you are able to delete.
   http://support.Microsoft.com/kb/308421