Toshiba 48L5445DG - Sat Receiver supports only 4 satellites?

Similar Questions

• What are the 150 SATA or SATA-300 supports the HARD disk in the Satellite A200-196

  Can someone tell me if I need a SATA-150 or SATA-300 drive to upgrade my A200-196.
  I think that the current drive of 80 Go SATA-300 but my diagnostic tool (third party) indicates the maximum speed is 150.
  Thank you
  Richard

  Great info by the way. I found the info also, that the controller supports only SATA-150.

• SATA HDD mode & performance on Satellite P100-222

  Hello everyone!

  I found that my HARD drive in instead of ATA7 UDMA5 mode supported. It looks like SATA ACHI is disabled in the BIOS, and I find no way to turn it on. It is clear that even faster UDMA5 then the drive HARD, but what about NCQ & other SATA command supported?
  In any case, the HD tune results http://www.hdtune.com is less than that specified for this HARD drive & interface:

  HD Tune: TOSHIBA MK1234GSX Benchmark

  Minimum transfer rate: 7.7 MB/s
  Transfer rate maximum: 34.4 MB/s
  Average transfer rate: 28.6 MB/sec
  Access time: 17,0 ms
  Gust speed: 64.2 MB/sec
  CPU usage: 9.1%

  Now the slowest part of my system & waiting to start to the top or level of loading takes a long time.
  Is someone have any suggestions to increase the performance of the HARD drive?

  Hello

  In my view the problem is not just HARD disk performance you need to optimize your operating system. How long takes the boot process depends on the application from Windows OS list. You can check it out if you go to start > run and enter MSCONFIG here.

  When the system configuration utility is started Startup tab check and remove the check mark in front of elements, you need not. Also, check the startup folder and delete all the shortcuts, you don't need. On this way, the boot process should be faster.

  If you need more performance for games I recommend you to upgrade RAM. You will see that the unit runs a lot faster and you can use several applications at the same time.

• Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  Hello

  I tried to fix this for hours, I hope someone can help me.

  I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

  I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

  Your bootable USB key could not be created

  Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

  If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

  Thanks in advance for any answer!

  What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

  Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

• "We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below"this is an email I received support to itune.

  We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below. This is an email I received support to iTunes and I was wondering if I should do it

  I would not click on any link without further investigation.

  Is the link to an official source of Apple?

  You have a web address or URL of the link that you can post here?

  What happens when you go directly to AppleID or another connection site

  where there is no doubt of the authenticity? • Apple is not usually give

  you a countdown, so I think that the item that you see is a scam.

  PS: If you had a trial subscription to Match iTunes or other item

  You can check personally, or any other service you may already

  charged, the way back to Apple should be a known to ask them.

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Why windows xp 32-bit supports only 3.25 GB of ram?

  Why windows xp 32-bit supports only 3.25 GB of ram?

  Tehre is no solution for this problem, and I don't want to install xp 64-bit,

  coz its not user frndly, thank you

  My apologies, I must have misread the topics when I did my first answer. For some reason, I got it in my head, whether you use Windows 7 32 bit.

  I stand by my original comments well that although I appreciated now that you are referring to Windows XP.

  If you want to go to 64-bit Windows XP I'm not sure if this is even possible now. Unless you buy a commercial version second hand. If you can, make sure that it comes with an installation CD.

  To check the compatibility 64 bit XP the following may be useful...

  http://support.Microsoft.com/kb/896456

  http://support.Microsoft.com/ph/8599

  It will be even more important to check the hardware/software compatibility via the websites of the manufacturers.

  Tricky

• "SQLite database is supported only on SD card or storage similar." - I need real documentation on this.

  I read the following quote "SQLite database is supported only on SD card or similar storage." on this forum.

  I need real proof to send to my product manager.

  Are there available documents or where in the API is that has turned out?

  Documentation (http://docs.blackberry.com/en/developers/deliverables/8682/SQLite_file_locations_719036_11.jsp)

• Cisco VPN only supports only 32-bit

  Hi all, I have 64-bit ram (2 GB) and windows 7 installed on... but my Cisco VPN supports only 32-bit only... my query is can I buy an another 32-bit (2 GB) and insert it in another location... .will it compatible?  enjoyed your answers... Thanks maou

  No, that succeed not compatible, you could dual boot with Windows 7 32 bit and you'd be able to use the CISCO VPN, you must purchase an additional license for the edition of Windows 7, you are running.

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Buy an additional license:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  or

  You can upgrade to Windows 7 Professional or ultimate edition if you run or another edition and download free Windows XP Mode and use it there:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• How to format my pc, I am runing with toshiba windows 7. Support ++

  Original title: Someone help please, how do I format my pc, I am runing with toshiba windows 7. Support ++

  Someone help please, how do I format my pc I'm running with windows 7 Toshiba. Support ++

  I'm not sure what you mean but I think you want to restore the computer to factory settings, this is the way it was when you bought it. You have to press an Fkey at startup, F9, F10, F11, or F12 I can't remember which and make a full or destructive reinstall. The option that allows you to keep your files is probably keep your problems.
  Make sure that you copy all the important files on an external drive before you start.
  If you look in your menu under Toshiba you should see a utility that allows you to burn DVD discs installation and it would be a good idea.

• What is the meaning of ' (vSphere 6.0 supports only the CPUs available after June ((troisieme quarter) 2006? It specifies in VMware Vsphere 6 release notes.

  What is the meaning of ' (vSphere 6.0 supports only the CPUs available after June ((troisieme quarter) 2006? It specifies in VMware Vsphere 6 release notes.

  Can someone explain?

  Well, it means you cannot run vSphere 6 on your 10 year old server, because your CPU from 2006 or newer.

• FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  When I use the converter P2V a VM to ESXi. The VM OS is SUSE10SP2. the process is 98%, give the error:

  FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  Source operating system is SLES10SP2

  How to deal?

  The source has been recognized as "suse", not as "sles:

  -->

  Are you sure it's SuSE Enterprise and not Open SuSE? Converter supports SLES only.

  Anyway, you can try a hack to make apparently SLES - change the ' / etc/SuSE-release ' on the source machine (or something similar in the model/etc / *-free) and in the first line add "Enterprise." Then try the conversion again. It's the machine 'lsuseinux90 '.

  Regarding the "opscenter' - version has not been recognized too. The second line in the output file should be something like "VERSION = xx".

  HTH

  Plamen

• SD card reader supports only 1 GB cards satellite 2450-101

  I just bought a Kingston 2 GB SD card. Despite many efforts, I can't get my 2450-101 to format 1 GB storage on this map.
  Someone at - it of this experience and a way around it?

  I found in googel Satellite 2450-101 specifications and it seems that the card reader can manage only the SD card without support MMC. Additional not all card format SD is supported and therefore in my opinion the 2 GB format SD card is great

  I put t know if it will help you but I read somewhere in the forum about similar themes. The Toshiba SD card format utility has been updated and could format the 2 GB SD cards. I don't remember the version of this utility, but you can try to download the SD card from the Portege M400 section format utility.
  But as mentioned, I don't know if this utility works on the Satellite 2450 m.

• Re: Driver and Toshiba tool support once the Satellite has been interrupted

  Hi all

  I bought a Tosh laptop about a year ago and I like to keep programs and services up-to-date.
  When I visited the site the other day, I noticed that my laptop model is now discontinued... someone else in the family just got a new laptop Tosh and I noticed lots of Toshiba Basic programs and services are much more recent than mine.

  No one knows how long we receive updates for? End of warranty? End of production?
  I downloaded Tosh a similar, more recent programs and they work just fine - I don't know why my previous updaters of Tosh software does not give them to me. Of course, some newer models will have some new features that are not compatible with mine.

  Everyone has noticed this on their laptop?
  Very quickly after the purchase, the support of software dries...

  I attended the launch of Windows 7 and received a ultimate disc that is just lying there.
  I think of "slipstreaming" latest updates in it, and I notice that I can add a new driver updates. I'm starting to think the software of my laptop has reached the end of the line for the backup and restore - slipstreaming a Windows disk at retail with the newer programs of Toshiba and drivers maybe better for future reinstallation. What other users think / do?

  Thank you

  Hello

  You can always download the drivers, tools and utilities for Toshiba laptops even if the laptop is no longer available on the market.
  Even drivers for the very old computers Toshiba notebook are read by download.

  You should consult the European driver of Toshiba page and select Archive type of product in the first category.
  Drivers for older series of portable computers are moved to the Archive and you can find.

  Welcome them

• Satellite L750/052: Atheros AR9002WB-1NG supports only WPA?

  I seem to have a problem with a L750/052.
  I have the latest version of the driver for the Atheros AR9002WB-1NG, which is 9.2.0.316.0.
  I'm trying to connect to the modem/router is a Netgear DGND3700.

  When buying at the origin it would not connect to the wireless network it just kept rejecting the key wireless WPA2 (AES).
  I've set up a WPA (TKIP) network and it recognizes the key but it will just keep stalling even if in the same room to the modem/router.

  To further reading, I discovered a lot of Atheros cards Wireless will not support encryption WPA/WPA2 and WEP, which is much less secure support and wireless manufacturers stopped including it products out there.

  Y at - it a newer firmware that could solve the problem of the WPA or includes support for WPA2 (AES)?

  My other Toshiba has a Realtek Wireless card and no questions.

  Hello

  I found this PDF on AR9002WB-1NG specifications:
  http://www.QCA.Qualcomm.com/media/product/product_75_file1.PDF

  It s mentioned here that the Atheros card support AES, TKIP, WEP security.
  Then you should be able to use AES (WPA) encryption.
  But this map is only 2.4 Ghz

  If you need to make sure that your router is also 2.4 Ghz; This means that you must use the standard 802.11 WiFi B or G (802.11 N runs at 2.4 Ghz and 5 GHz)

  By the way; Frequency 2.4 Ghz is used by other different devices such as microwave, baby monitor, or Bluetooth, so it could be possible that these devices are thus the signal of your Wlan.

  By the way; the latest Atheros divers can be found here:
  http://APS2.toshiba-tro.de/WLAN/