Toshiba 50L7333DG CloudTv installation

Hello everyone,

I bought my Toshiba 50L7333DG a few weeks ago and started to install the Toshiba CloudTv but changed his mind and cancelled the installation.

Today, I tried to continue with the installation, but I couldn't go back to the menu of some.

So my question is: How can this Menu when it appears automatically?

Hello

Have you tried to RESET the TV?
If this isn't it.

Select Reset TV resets all settings, including registered channels, to their original factory values. In the Installation menu, press to select Reset TV and press OK.
A screen appears warning that all settings will be lost. Press OK to continue.
When authorities set turn it back on, the Quick Setup is displayed. Press OK to move the Setup program and perform an auto tune.

By the way: I recommend you to read the manual of Toshiba for the series of L7333 get all the information on the menu and other features.
http://www.Toshiba-OM.NET/LCD/PDF/English/L7333-4050-English.PDF

Tags: Toshiba

Similar Questions

  • Can satellite L300-1BV - I ask Toshiba for the installation CD?

    Hello

    How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
    But I don't know how I'd go to this topic.

    Any advice?

    Hello

    I think you mean the Toshiba recovery disc. Is this correct?

    If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
    This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

    Normally, you get a recovery reminder message and I think that this information could be useful for you:
    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Toshiba 39L4333DG CloudTV: I do not understand! Guide needed

    Hello

    I've just set up my new TV, I think it's great (besides being too slow), but I do not understand how to use the CloudTV.

    My TV came with NO manuals: it included only a quick installation guide and a brief description of cloud TV.
    I was able to download the full manual, but it says to look at the TV guide of cloud that I can't find anywhere.

    So I have set up my user in the TV of cloud, but how can I manage my messages? Or who are the 4 guys right suggesting me things to see, based on what?

    If anyone can provide Cloud TV guide PDF or some other form of guide?

    Thank you very much!!!

    Hello

    Visit this link:
    http://www.Toshiba-OM.NET/LCD/PDF/English/L4333-323950-English.PDF

    This is the instructions I found on the Toshiba Toshiba L43 CP portal * and W43 TV *.

    Information and service cloud TV details are on page 52
    Cloud TV includes the use of the browser web and Skype

  • V5.3.49.124_A Toshiba Video Player-installation of patch

    Hello
    I am trying to install an update for Toshiba Video Player, released February 15, 2015 - patch version 5.3.49.124_A. The problem is, whenever I try to install it it says that its extraction of the file, then an error message appears, "Failed to create the file, error 120." Please help in trying to resolve the above error.

    Thank you

    Inayat

    Hello

    Can you please tell us what model of laptop do you have?
    You use your laptop computer with the operating system preinstalled (factory settings) of origin?

  • Toshiba Media Controller Installl failure... (WIN 8)

    Hi all

    Seems to be the Toshiba Media controller released [here: http://www.toshiba.co.uk/innovation/download_drivers_bios.jsp?service=UK]

    Is detined to fail by design...

    It's 'metro', the problem is that Windows 8 will not allow you to install files appx unless its the store unless you have domain connected machines etc. you also need a development license.

    I tried loading side this with powershell, but nothing helps...

    Anyone who is or have they just get something out without testing?

    Thank you

    L

    Hello

    Yes, you are right, as far as I know that you can not install Apps from metro unless its on Microsoft Store. So in my opinion, this was a bad download.
    You should not try to install this application on computer you.

  • Toshiba bluetooth stack installation problem

    Hello

    I have some difficulties with the pile of bluietooth driver after installing bluesoleil and uninstalled because I wanted to use toshiba stack bluetiooth.

    I think one of the problems is the fact that the com port that is used to install the Toshiba bluetooth stack are correct.

    Can you confirm if this can be a problem: indeed, the driver was installed using the ports: 6, 7, 10, 11, 12, 13, 14, 21, 22.
    Is this normal? (in fact all the other ports are available on the PC, but I think that because of Blue Sun installed previously, other ports have not been used.

    Thank you
    Stéphane

    Sorry mate but I think you should clarify some important facts:

    Firstly what Toshiba laptop you have and what system do you use?

    Second: as far as I know, can be used as part of the Toshiba laptops Toshiba BT stack software. If don t have a Toshiba product, you must use the software drivers provided by the manufacturer of the laptop.

  • Portege A600 - peripheral unknown after Windows 7 installation

    All the g ' Day.

    I've got an A600 (original Vista) I recently installed Windows 7 Professional 32-bit (reformat/reinstall). I was careful with the installation order. All right except the built-in camera does not work and there is managing an unknown controller PCI Communications Simple in the device. Without a doubt, the two are linked.

    I tried to reload the drivers for the chipset without result. The unknown device is bus PCI 0, device 3, function 0. Is it possible to determine what this device is so I can find the missing driver?

    Hey Buddy,

    Can you post the vendor and the device of this unknown device ID? It would be useful to identify it.
    => [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

    But the PCI communication controller could mean the webcam in your case I would try to install the driver for the webcam of the official website of Toshiba. After installation, you should be able to start the webcam software, and use the webcam.

  • Installation of Windows XP on new machines

    Hey, does anyone know if the latest machines Toshiba supports the installation of Windows XP,
    It is commonly accepted to support only Windows 7 and OS later?

    I tried to install Windows XP Pro SP3, 2008 version on the machine Satellite C660 released in 2011.
    and he crashed at the beginning of the installation. Is it possible that the Bios prevents
    forcing to work with Win 7?

    Or some drivers are missing in XP installation package, which makes XP incompatible with HW?

    On this forum, you will find number of threads where you can find answer to your question and also good explanation how to do to install Windows XP Home edition on the new laptop models.

    > I tried to install Windows XP Pro SP3, version 2008 on the satellite C660 released in 2011.
    and he crashed at the beginning of the installation.
    I assume that it happens because of lack of driver SATA. It must be loaded with F6 before installation of WXP begins. You can also create the installation disk of Windows XP Home edition with the integrated SATA driver. How to do this you can read
    http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

    If you have any other questions you are welcome.

    By the way: you have created recovery DVDs before you started the installation of Windows XP Home edition?

  • Windows installation interrupted as Equium A300D stops itself

    Hi all

    I've had my Toshiba Equium A300D for 2 years now. Meanwhile, it works normally, sometimes stops himself maye because it was too hot.

    Recently, he tried to install updates to Windows Update, but never successful. I left the computer to update all night and there was 2 of 12 updates... all the time so I always had to shut down the computer by pressing the power button.

    I was unable to change the setting to update Windows automatically, because every time I tried to do it froze. Most of the other commands became even viewing photos that do not meet.

    It was until my computer could not connect to a certain wireless network, while other devices may I decided to reinstall Windows completely. He was installing normally but it got too hot and the computer closes again!

    I tried to install again and he was arrested again, but I got up in the final phase of the game when I turned it on again, it was always 'finihing the installation may take several minutes. lease do not interrupt or shut down the computer. Let him over several hours, but he did not move to a different stage. Before the computer shuts down, I think I arrived at the scene after that.

    I tried to press F8 to start a new installation, but he's only got in this screen.

    What can I do?

    Please help me! Thank you very much in advance!

    I am in Germany at the moment, but I live and I bought this computer from the United Kingdom.

    ttd500

    Hey,.

    You can test Windows with Toshiba Recovery disk installation, please?

    The disc usually contains only drivers and software prétestées so installation shouldn't t be a problem because it s pre-tested software from Toshiba.

  • Re: Satellite T140-17F - some problems during installation

    I just to the @! @££ ! ... et f » @ » !!! @ What a pice of useless @! £@!
    Fees out of the stores and it is constant restarts? OMG
    I'll never ever ever ever ever ever ever a Toshiba agen.

    After all the 20 restars uhm, I got fed up and used Ctrl alt del which has halted the prosess for awhile...
    Then a new list of issues got smaced in my face...

    1: he can not connect wireless internett it dosent even try to look for him.

    2: the "any implementation for the first period of use" (including the constant loop samekh) starts EVERY time I turn on the pc.
    (Even after I KILLED all the associated toshiba estimé on the pc.)

    3. what should I do now?
    It of not like I can completely erase and then I have to buy a usb cd rom... and NOT! @!! @# @ I'd throw rather the @! "@ pc in the trash.

    Hi mate

    First of all it of not necessary to go bananas here in the forum.
    If you want to discuss issues, then you can do this, but the right way

    Back to your question;

    > After about 20 restars uh, I got fed up and used Ctrl alt del which has interrupted the process for a while...
    Yes, the Toshiba laptop are pre-installed with a picture of Toshiba and the installer may takes a little longer and needs a few reboots.

    > 1: he can not connect wireless internett it dosent even try to look for him.
    Perhaps, you should first check the BIOS if the WiFi is enabled.
    Then check Fn + F8, that should enable the WLan under Windows OS!
    The WiFi driver update could be useful too.

    > 2: the "any implementation for the first period of use" (including the constant loop samekh) starts EVERY time I turn on the pc. (Even after I KILLED all the associated toshiba estimé on the pc.)
    As I said above, the configuration may take a while, but after the installation process, everything should work as well if this is not the case, then you should try to reinstall this device try again HARD drive recovery that does not need the CD.
    Turn on the device, press F8 and choose fix my computer. Then select Toshiba HDD recovery!

    Good luck & you always be welcome in the forum...

  • Tecra A8 downgraded XP and none of the Toshiba Utilities works

    Hi all

    I just got a new Tecra A8 - it is downgraded to XP, and none of the Toshiba Utilities work (energy saving function keeys, keyboard shortcuts, etc.). When I try to reinstall - there is always an error message (missing dll or sth similar) - I tried to update the bios - couldn't - once again a missing file!

    any ideas how to solve this problem? at least the fn keys (fn key works - I see a light come on when I press - not the functions well!)

    your help, I much appreciated!

    see you soon,

    Dimitris

    Hi Dimitris

    May I ask you what Tecra A8?
    I visited the Toshiba driver page and it seems that Toshiba provide XP drivers for two different units A8 PTA83Eand PTA82E.

    You should be 100% sure that you are using the correct drivers!
    In addition, Toshiba released the Installation Instructions of the document on the page and to my knowledge it s necessary and important to follow this line of installation guide. The proper installation order is necessary!

    So take care and check again

  • BlueTooth and S1: Toshiba stack moved (Topic deleted?)

    Hello!

    I posted a new topic on my Toshiba BlueTooth stack installation problem on my Tecra S1 after installing XP SP2.

    This topic has obviously been deleted, I have no idea why.

    So, here's my question again:
    When you try to install the 3.10 battery, after 56% of installation setup application again and again turn on the BlueTooth device. But don't help not turn on the switch or by pressing FN + F8. It doesn't matter if I switch before or during installation.

    Any help?

    And please inform me if my subject is not in accordance with the rules of the Council.

    See you soon

    Lutz

    Hi again

    First of all I must tell you that I laughed on your ad. Please click on your nickname. There you can see all of your recent posts. Your ad is on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2423&messageID=6902#6902 in category Bluetooth issues. ;)

    In any case, I have another question for you. Have you tried to install Easy Connect Bluetooth and Bluetooth Monitor also?

  • Display driver cannot complete installation on Qosmio G30-137

    I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
    Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

    Hello

    Have you installed the Windows from the original CD of Microsoft?
    Why you suggest that the graphics driver has a malfunction?

    I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

    In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

  • Does not start the Toshiba Qosmio X 770 products online Information - 13F

    Hello

    Excuse me if my English is not very good: I'm french! (nobody's perfect...)

    My problem is: I can't launch TOPI (Toshiba online product Information) on my computer (Qosmio X 770 - 13F).
    Operating system: Windows 7.
    The firewall is: BitDefender 2013.

    When I try to launch the TOPI, I get only an error message:
    "I'm sorry. An error has been detected! "(Translation:"Sorry."). An error has been detected! »)

    When I try again, I always get the same message.

    There is also a link: http://topi.toshiba-tro.de/update
    But Internet Explorer cannot display this page (which perhaps does not exist?)

    I have re-uploaded the TOPI on the Toshiba Web site installation folder, but there is no change :-(

    Someone at - it an idea about this problem?

    Thank you

    Jerome.

    Hello
    > Anyone has an idea about this problem?

    It seems that the service and / or the server is down.
    I could not view this page too.

  • Toshiba VAP does not work in Win7

    Is that someone have Windows 7 issues compatible with Toshiba value added package with Windows 7?
    His avalibe for Vista and Windows 7 but it doesn't do anything under Windows 7. I can't change my brightness or switch off the lighting on my laptop.

    If someone has had this problem and if so, is it fixable?

    This PPV is version beta and if check you what is written on the download page for this package, you'll find follow the instruction:

    + This beta software is provided on one - is the base. Use at your own risk. +
    + Beta drivers and utilities are sometimes provided by manufacturers of components like the pre-release for quick bug fixes and access to new features. * Beta software is not fully tested by the manufacturer or by Toshiba and may include some important it is the responsibility of the user to protect the system and your data using software in beta with Toshiba products. It is strongly recommended that users back up their data before using beta version software from any source. Please make sure that the most recent published software is not already displayed at support.toshiba.com before installation and use of software in version beta. Software in beta is offered as-is and carry no warranty or support services. +

    At the start of Toshiba Win7 support we will get complete tested and support tools and utilities. For the moment, you can have this beta stuff only.

Maybe you are looking for