Toshiba BT stack steals the puppetmaster COM port

Similar Questions

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• How do I change the prolific com port device driver 4 to the com port 1

  original title: prolific device driver

  When I installed Prolific he assigns the device on com port 4.  I need to assign to com port 1.  If I change my computer 4 to port 1 of the model by using the Device Manager does not recognize the software that I use.  The software must have port 1 affected first comp.

  Hi domjoseph,

  1 do you have. what prolific device installed?

  2. What is the model number?

  3. have you installed the driver for the device?

  If it helps, try the step below and check out them.

  (a) open Device Manager.

  (b) right-click on the prolific device and click Properties.

  (c) click the "Port Settings" tab, click on the button "Advanced".

  (d) pull down the scroll down bar on the left side and select COM 1 (NOTE: choose one that does not say 'in service' next to him). Click on 'OK '.

  (e) click "OK" again Note that the device will be displayed as being on the same COM port as it was before but will be displayed on the new port, if you close Device Manager, and then open again.

  (f) close the Device Manager. You may need to run the software that came with your device to do rescan the COM ports.

  For further assistance, contact the vendor of the device for more information.

  http://www.prolific.com.tw/Eng/support.asp

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• How to use the shared variables to address several Watlow controllers on the same COM port

  Hello

  I am using LabVIEW 2010 to control 4 Watlow temperature controllers on a port com 3 are model 96 and 1 is a zone EZ controller. The controller has a unique modbus address and I'm trying to read from and write in the individual records (for example, setpoint closed-loop) variable shared help. I would return the data during playback (even if the data is displayed as invalid), but I am unable to change the value in the registry in writing. How can I be sure that's the Modbus server send commands to the correct controller?

  Chuck

  Hi Chuck,

  Sorry for the delay in response, I was away last week. You can create as many servers for Modbus on one COM port that you would like, the only problem you'd see is if you tried to call the port from different locations at the same time. With respect to the documentation to cross, I'd start with the tutorial below for a comprehensive manual of Modbus. There are also quite a few listed under Datalogging and supervisory control Module help topics that may be useful if you want to solve specific issues.

  Introduction to MODBUS

  Kind regards

  Peter W.

• PowerConnect 6248 stacking using the front SFP Ports

  I am trying to stack two Dell Powerconnect 6248 switches. Currently they are chained together, but I modules fibre for the front sfp ports. Theoretically, I should be able to stack them. But when I try:

  stack 1/g45 #stack - port console (config-battery)

  Could not set the front panel stacking mode.

  Any ideas? Thank you!

  The PCT6200 requires a stack of modules installed in Bay 1 (XG1 XG2) at the rear of the switch. The stacking module uses CX4/Infiniband type stacking spacers.

  Stacking of front port / user is not supported

• Unable to connect to the physical COM port

  In my region of lab, I use VMware ESXi 3.5 on an HP ML350 G6 server.

  The server has a physical COM port but when I try to add a serial port to a guest VM 'Physical serial Port on the host of the use' option is greyed and unavailable. Other options are available by I don't need them.

  Any other virtual machine uses the COM port.

  How can I enable the use of the COM port to connect a modem to my VM guest?

  Concerning

  Marius

  The device series host feature is not available on ESXi hosts.check Administrator's guide

  Lige, VCI, VCP3, VCP4, VSP, VTSP

  Please note, if your problem or your question has been resolved, please mark the thread as answered and award points.

• How to find the correct COM port

  I am trying to load software Palm V Organizer Office but the connection cannot be done byween the cradle of the Palm and the port. There seems to be a free port, but it does not connect.

  I use a serial to USB adapter and a USB port on my Equium A60.

  Anyone can offer help please.

  Thank you!

  Hello

  I'm sure that there is problem with serial to USB adapter. It is possible that the software cannot find a free port. Will there be another opportunity to connect to the USB port?

• How do I know how many in the PC com port

  Need to detect port existing series, including virtual, can then make a selection.

  Any suggestion, thank you.

  This can help you on the way.  If you scroll down the page, you will see that control VISA resources already contains all possible elements that can be used without any programming

• a program I want to use does not show the available com ports

  Soladin inverter monitor program requires that the choice of a model in its menu of configuration port, but none appear

  Initially, the program was written for computers with rs232 ports

  have installed a series to usb adapter with the right driver, but the program still shows not all ports to the choice

  Worked with XP and tried to run it with the comparability program

  now running windows 7

  Sincere friendships George Shepherd

  Was an answer of MASTERVOLT

  I was looking for the unit to show me what COMPORTS were available, but what YOU have to do is type IN the Compote.

  THIS SOLVES THE PROBLEM

  George

• How to manage the data after the serial com port?

  Hi all

  I'm new to labview and serial communication. I tried to receive data on external device labview (pic18f452). It's done, but I am getting data as strings. If microcontroller gives "11.25", in labview each letter is delivered to a different as string ("1""1" "". "") "2" "5").. How can I manage data... to make it unique as 11.25, a number constant.

  If possible, join some examples with your answers... Thanks in advance.

  It seems that you read too fast, read up what an endcharacter probably puts the characters in a string that can translate the string of numbers conversion routines in the palette of the chain.

• Problem removing battery bluetooth / hidden devices / unpublished COM ports

  Hello
  Having problem completely remove Toshiba Bluetooth stack / hidden devices / unpublished com ports

  I uninstalled Toshiba BT s/w...

  But:

  (1) peripheral BT Toshiba hidden appear again and I can not remove (get the error)

  (2) the COM ports occupied by Toshiba BT not out (so they cannot be used by another pile of BT) and always appear in the registry
  ex: friendly name Toshiba BT Port (COM4) always in the registry

  (3) these new com ports do NOT appear in Device Manager

  Thank you

  What COM ports are actually used (must be used) by your current system?

• Is it possible to use a Toshiba PC Bluetooth Stack as the helmet

  My environment:
  Windows XP SP2
  Toshiba Bluetooth adapter PA3642U
  Toshiba Bluetooth Stack: 5.10

  There is a thread with a similar issue dated 2006. ("Can I use computer as a phone headset?") The son said that it is not possible to use a PC (with Toshiba Bluetooth stack) as the headset for my mobile phone.

  Is this always true?

  If that's still true, I would like to know if it is possible to get this functionality using the Toshiba stack SDK? Is there an underlying technical problem that makes this difficult to do feature? I am a professional software developer and can, if necessary, make this change, but I'd rather find a solution without writing custom software.

  If Toshiba has added this feature can someone tell me how to configure my PC to make it work?

  Thanks in advance for your help.

  Hello

  This feature will come in the future with a new battery of Toshiba BT... but I don't have any calendar... Sorry

  SDK is possible please check this [link: http://aps2.toshiba-tro.de/bluetooth/?page=faq/sdk]

  I hope this will help you.

  CU

• Browse the COM ports

  Hey guys,.

  I'm trying to loop through my available COM ports to see what serial port my device is connected to. When I start my VI, it remains at COM1 and never goes to the following COM port. I'm at least on the right track?

  Any help is appreciated.

  Eric

  Auto-index just a loop for:

  EDIT: Given the obligation to stop once you have a connection. In this case, simply use the conditional terminal.

  

• USB-232/2 shows the COM ports but not found resources VISA!

  Hello

  I use an NI USB-232/2 interface to connect my OMEGA Engineering temperature controller to computer. The thermostat communicates with the computer via hypertermianl and the configuration of the OMEGA software, but can not be detected by OR MAX I've attached a screenshot of my MAX of NOR. I could see the two COM ports, but I can't see the VISA test Panel.

  My problem is similar to the post problem OR USB-232! I tried the solution for uninstall and reinstall NI VISA both NI Serial, but still does not.

  OR Labview 2009

  OR MAX 5.6.0

  NEITHER version 4.0 Serial

  Version NOR VISA 5.4.1

  Temperature controller: Omega Engineering CNi1644-c24

  Spoke engineering application NOR two days, no solution. Can anyone help? Thank you!!!