Toshiba Canvio 3.0 base 1 TB Portable drive not detected in Windows Explorer

Similar Questions

• Toshiba Canvio 3.5 3 TB HDWC130EW3J1 hard drive

  Hi all

  Can someone tell me if the above hard disc will be compatible with Windows 8.1?

  I have searched the Internet and cannot find an answer.

  I think buying a new PC with installed 8.1. Don't want to but it if I can't use my hard drive with it.

  Any help will be greatly appreciated.

  James

  Hello

  It is an external HARD drive which will be connected to the USB port.
  HARD drive supports USB3.0 and USB 2.0 standard and the min system requirements are:

  Windows® XP / VISTA® / Windows® 7
  With 750 MHz or faster CPU, 10 MB of disk space hard, 256 MB system memory, a USB 3.0 or USB 2.0 port

  However, I put t see any reasons why this external HARD disk should not be supported by Win 8.1

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Seagate expansion portable drive not seen on my linksys x 3500

  Plugged into a disk Seagate Expansion Portable 1 TB srd00f1 to my new Modem - Linksys router X 3500, but he can't seem to upward and when I looked at the on the network, it was confirmed that there is no drive present someone at - he had thoughts

  I recommend that you contact the Mfr of that drive for a good use and configuration of the drive is implemented well. Check if the external power supply is required.

  Consult the training set up manual and configuration on routers web page. Formatting NTFS is recommended on the disks.

  http://support.Linksys.com/en-MEA/support/gateways/X3500

  I recommend phone by contacting your regional Linksys supportoffice to see if the disc is officially supported on the x 3500 and ask questions on installation and configuration.

• Device base system - lack error driver for EliteBook 8540p Windows Pro 8.1

  I'm looking for Base system device drivers.

  Hardware ID

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C

  PCI VEN_1180 & DEV_0592 & CC_088000

  PCI VEN_1180 & DEV_0592 & CC_0880

  I tried my best to solve this problem, but unsuccesssful. Can someone help me?

  Hello:

  Use the Windows 7 driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4096169&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_79317_2%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Photoshop CS3 portable is not compatible with Windows 8

  I have a photoshop cs3 portable version that worked with my dell 2400 that were running windows xp service Pack 2. Now, I have a dell xp 8500 running windows 8 and my photoshop is not compatible. I tried to run the compatibility check and still can't make it work. Can anyone help please?

  Will not run on 64 bit win especially 8

  You may be able to run a virtual XP machine on win 8 If your material support it, but the easiest way is to upgrade PS

• It is not detected on the Toshiba Satellite A300 - 1 5 support page

  Hi guys,.

  Please do me a favor. I'm in Dubai, I bought my Toshiba laptop in Dubai. This is the Satellite A300 - 1 5, Sr.No. 98487056Q.
  The problem is: whenever I try to find my laptop using Toshiba and the technical support web site, it does not detect my machine.

  I tried Auto detect, put serial no in the box, the two option, but all returns with the same result - not available in the region.

  Until what I detect my machine, I am unable to identify the driver and therefore impossible to check the updates.
  It is strange that Toshiba is not by site Web from Toshiba.

  Can someone help me?

  It may happen that the system somehow cannot identify the model of laptop, but to download drivers, it is only important to know the first part of the reference.
  If your laptop belongs to the series of PSAG4E and on the Toshiba download page, you can set exact notebook model and see what drivers are available.

  Have you tried choose your product manually?

  http://EU.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/

• A toshiba canvio 1 TB external portable hard drive can be formatted in FAT32?

  I have a bought a toshiba canvio 1 TB external portable hard drive so you can use it to watch all my TV shows and movies and of course store them all. I plugged in my DVD player and it cannot read the device. It is formatted in NTFS and I know that this format does not work on my DVD player on a USB key, I got so I tried to format my hard drive in FAT32 so I can use it for what I wanted.

  I tried to create a small partition, but I find I don't get the option to select FAT32, EXFAT only (I don't know what it is) and NTFS.

  Can someone please?

  Hello

  (1) what happens when you try to format it in FAT32?
  (2) you receive error message when trying to get in shape?
   
  See the below link that can help you in the matter of fixing.
  Convert a hard disk or partition to FAT32 format
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-FAT32-format?SignedIn=1
  Hope this information helps.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Toshiba Canvio Stor.E 1 TB 2.5 "great copy hangin out after a few minutes

  Hello

  I just bought the Toshiba 2.5 "Stor.E Canvio 1 TB on a Windows 7 Thoshiba laptop.
  Whenever I do a great copy, after a few minutes, the copy blocks.

  The process explore hangs, it cannot be killed and the only solution is to disconnect the usb port and plug it back.

  How would I fix this?

  Thank you
  Alex

  Hello

  Theoretically, it could be a HARD drive problem.
  Would be interesting to know if the other HARD drive does the same thing

  However Stor.E Canvio is a HARD USB 3.0 drive and it takes min 900mA to operate correctly.
  It might be possible that not enough power provided by the USB port.
  You can try to plug an external USB hub between the laptop and the HARD drive to verify functionality.

• Toshiba Canvio USB external drive does not work well

  I hope this is the right forum for this question
  Please help me with my external hard drive, Toshiba Canvio usb e05a032bau2xk.

  It worked fine, but not now.
  My OS is win xp, sp3, home ed.

  The Toshiba drive is more steady and is almost impossible to work with now. I checked with Device Manager that says the drive is working correctly.

  I've uninstalled and reinstalled the driver, cleaned and Defrag the disk (when I was able to access) but it works still very badly now!

  What else can I do to find out what is the problem with this Toshiba drive and return it works reliably?

  Thank you
  Jim

  Post edited by: jimrich

  Somehow I'm the drive working again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...
  Jim

  > Somewhere, I'm the player works again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...

  Thanks for the comments, I hope that the reader should work correctly now

• Toshiba Canvio 3 TB on the State of the extradition

  How can I make my Toshiba Canvio 3 TB on extradition State?

  I deleted the partitions!

  You have deleted all partitions and don't create all backups in the past?
  Well, I guess that you will not be able to recover these new partitions :(

  Of course, you can create other new partitions on this external HARD drive but unfortunately, the content is lost.

• Data storage 3.5 "Toshiba Canvio problem with permanent fade.

  Since I started using the Toshiba Canvio 3 TB 3.5 "external data storige disc he found himself a strange faul which makes it difficult to use.

  Data storage, for example when I use it to watch a video file off and then it start immediately again to go back... It can happen to the breast of a movie 20 times and it is very annoying because you never know when the judgment will happen...

  How to fix this please?

  Hello

  In my opinion it is not very easy to say why the external HARD disk automatically turns off while watching a movie. But this issue does not seem that there might be something wrong with the settings or software.
  Of course, some tools are available and installed on the HARD drive as the NTI Backup Now EZ software but I n t think that this could affect the playback of the movie. However, this software supports and automatic backup function and you can change how often your backup intervenes (hourly, daily, weekly, etc.). So try to disable this setting for testing purposes.

  Fact is that this 3.5 HARD drive must be connected to a power adapter and HARD drive supports the USB 3.0 interface but it s backward compatible with USB 2.0.

  I put t know what are the USB ports you have used for the connection of HARD drive, but I recommend you test all the USB ports taken in charge by the PC.

  Last but not least, it could be possible that there is a hardware problem simple HARD drive

• Toshiba Canvio basic 500 GB its suddenly stopped working

  Toshiba CANVIO 500 GB V63700-A BASIC
  I (full) support for 2012 and used, it can time.

  Now, it has suddenly stopped appear on my PC, sometimes showing message saying "device not recognized".
  About 2 months ago I bought a new PC with windows 8 (previously 7).

  All others under a new external storage devices works fine
  I also have 593400-a 500 GB 08/11 that work very well.
  also DTP110 1 TB 07/13 and DTP110 1 to 07/14, plus 3 more other make also works very well.

  Thanks for your help and advice

  Each HARD disk belongs to "wear".
  What does that mean? Well, sooner or later each HARD drive is going to die... and in most cases, these questions appear suddenly and are surprising.

  This HARD drive is a device of simple plug ' n play... This means that you have to connect it to the USB port and it should work...
  If this is not the case, the unit may malfunction and usually it is not repairable.

• Toshiba Canvio fail to mount after a month

  Hi guys,.

  I have Toshiba Canvio 3T (HDWC130EK3J1) and it worked fine for a month. Now, it will fail to mount.

  I read on some forums that it could be a power issue. I have USB 2.0 and perhaps need a "cable Toshiba y." I do not understand if I was using just a week just why I would need a cable in 'Y' now HARD drive.

  I have not any other computer with USB 3.0 to check if it's the power-hungry drive is the "real problem".

  I have iMac
  Mac OS X 10.9.5

  Any help or ideas?

  Thank you!

  I forgot to add...

  Toshiba CANVIO does not appear in the disk utility... at all. Not on the desktop, or utility disk. Many worked yesterday, displayed on the desktop with the other two drives ext...

  I've tried different USB ports too. I can hear the disc running when it is plugged into my Mac. The light is too much but does not appear.

  I read the Toshiba site we on this product and I have TONS of bad reviews... many people call a reminder. Very disappointed to read of a supposed good Toshiba brand.