Toshiba Canvio basic 500 GB its suddenly stopped working

Toshiba CANVIO 500 GB V63700-A BASIC
I (full) support for 2012 and used, it can time.

Now, it has suddenly stopped appear on my PC, sometimes showing message saying "device not recognized".
About 2 months ago I bought a new PC with windows 8 (previously 7).

All others under a new external storage devices works fine
I also have 593400-a 500 GB 08/11 that work very well.
also DTP110 1 TB 07/13 and DTP110 1 to 07/14, plus 3 more other make also works very well.

Thanks for your help and advice

Each HARD disk belongs to "wear".
What does that mean? Well, sooner or later each HARD drive is going to die... and in most cases, these questions appear suddenly and are surprising.

This HARD drive is a device of simple plug ' n play... This means that you have to connect it to the USB port and it should work...
If this is not the case, the unit may malfunction and usually it is not repairable.

Tags: Toshiba

Similar Questions

  • Ext. HDD Toshiba Canvio Basics. This disk is used inside?

    Hello!

    Ext. HDD Toshiba Canvio Basics. What hard drives used inside?

    I guess that's a common 2.5 "SATA HDD.

  • my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

    my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

    See the help/support site Tosh or their forums.

    Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

    Program compatibility test cannot be invoked

  • Tecra S4 - sound card has suddenly stopped working

    Hello

    I have a Tecra laptop S4 and the sound card has suddenly stopped working... It ceased to operate as last month and then started working again... but now it no longer works

    I am a computer tech for 14 years now...

    I downloaded the drivers from the toshiba web site and the sound card still does not work...

    I did a restore on the Toshiba as well and the sound card still does not work...

    Problems with Tecra S series with defective sound cards?

    I also have a Tecra S2 Portable and map its sudenly stopped working but after a few days after is started working again... weird huh?

    Hello!

    Can you please explain what you mean that it s not working do not?
    The sound card is listed in the Device Manager?
    You have activated the sound using FN + ESC?
    What operating system do you use?

    In your case, I will try to update the BIOS. You can find it on the Toshiba site.
    Check it!

    Good bye

  • Satellite NB10T-to-10F - webcam suddenly stopped working

    Hello
    I got the laptop TOSHIBA SATELLITE NB10T-A-10F
    The web cam has suddenly stopped working
    I tried
    Updated bios even without result
    Here is the picture of Device Manager

    In various cases, the webcam can be enabled and disabled in the BIOS
    This option would typically appear in the BIOS under: Advanced-> System Configuration
    Please check this box.

    Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

    If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

  • Satellite C650 - sound suddenly stopped working

    Hello.

    I bought this laptop the month last November.
    in any case, around a week or two ago, the noise suddenly would not work.

    He started making strange noises when I put in the headphones and speakers just made no noise at all never.
    I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

    However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

    I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

    I'm not really good at computers or anything, any help at all would be appreciated.

    Thank you.

    Hello

    I recommend checking some options first;
    -check if mute is not activated
    -check if all the volume controls are set to a higher value
    -check if the sound using headphones

    If this is not successful, you must reinstall the audio driver.
    First go to Device Manager and uninstall the audio driver. Restart the device
    Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.

  • CD/DVD player suddenly stopped working and undetected on M30X

    I have a Toshiba M30X laptop. My CD/DVD drive has suddenly stopped working. When I push the eject button nothing happens. No lights on the front of the disc door. When I look in my computer the drive still shows up! I have nothing extraordinary, before this problem occurred, it appeared after that I started the mobile upwards as usual this morning. I would appreciate any advice that anyone can be able to provide.

    What is the BIOS? BIOS recognize the drive?
    If this isn't the case, so it could be a hardware problem.
    If your laptop is under warranty then contact the service partner for a replacement

  • Satellite L50Dt - A - touchpad suddenly stopped working

    Hello
    I'm not a part of L50Dt-A Satellite. PSKM2A. It is running Windows 8.1.

    Last night the touchpad suddenly stopped not working, no cursor on the screen.
    The little mouse on the touchpad indicator has not been and is not yet lit.
    So I pressed the Fn + F5 key so many times, but that didn't work back.

    I went to the mouse properties in Control Panel, and under the hardware, it is listed.
    In Device Manager, there is nothing under the mouse either.
    I went to the site of Toshiba and downloaded the driver for the touchpad.

    However, on installation, it says that this is impossible because the computer already has one.
    I need to uninstall and reinstall.
    However, I don't find the touchpad synaptics original anywhere to uninstall driver.

    Everything is updated via windows update and I ran the troubleshooting tools and that you have restarted, and so far, nothing has worked.

    I plugged in an external mouse so I can use it.
    But I'd like my touchpad mouse works again.

    Any help you can give me would be much appreciated.

    Thank you

    > Yesterday the touch pad suddenly stopped working...
    I ve never been faced with this problem, but try first to make back the OS to an earlier time using system restore just to see what will happen.

    In this whole thing that it is confusing that touchpad isn't listed in the Manager under the mouse devices and other pointing devices.

  • Satellite L300 - Built In webcam suddenly stopped working

    Hello

    I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

    I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

    When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

    The microphone works well on Skype, but the camera does not open!
    Please tell me how to solve this problem, what missing am me?

    > I tried the system restore

    You got the device using the Toshiba Recovery disk?
    In this case the cam should work

    Otherwise I would say that this unwanted material s.

    Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
    The webcam is connected to a USB controller on the motherboard.
    If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

  • Satellite L850 - webcam suddenly stopped working

    The web cam on my Satellite L850 has suddenly stopped working.

    It does not appear in Device Manager;
    I downloaded the latest driver on the Toshiba site;
    I checked the BIOS and the web cam is turned on;
    Always when I open the web cam application I get the following message:

    "webcam initialization failed Please restart request and camera control.

    I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

    Tired of going round in circles and getting nowhere.

    Any suggestions?

    Post edited by: mrclean

    Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

    I also recommend the suite of this workaround:
    Uninstall the webcam software
    Uninstall the VAP
    Uninstall all software needed the webcam (Skype, etc...)
    Now, restart and install CCLeaner (cleaning of freeware software)
    Reboot once more.
    Run CCleaner and clean the system and the registry.
    Reset
    Now follow with installation of VAP
    Reset
    Install the webcam software
    Reset
    Test webcam.

    Good luck

  • Built in laptop keyboard suddenly stopped working the Dell Studio 15

    Dell studio 15 laptop
    Vista Home premium 64-bit
    Keyboard suddenly stopped working, using the screen keyboard now.  All buttons unresponsive.  No virus or malware found by updated AVG scan.  The touch pad or external mouse, both work.  I have no external keyboard.  System Restore does not work.  The driver is up to date and its status is "work prperly.
    Help, please.

    Is it still under warranty, if so contact Dell

  • My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

    I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

    It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

    Hello

    1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-ID/default.htm

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Speakers suddenly stopped working

    my sound has suddenly stopped working. After talking to a few knowledgeable people, I uninstalled the Realteck driver, and then I had to come its decent through the speakers! It is a HP desktop computer, a6750y

    Then I tried to re - install the driver. Although the pilot had the same name, it was more recent than previously on the system, so I re-installed and once more, no noise. So I uninstalled this version, but now I have no sound!

    I get sound through the headset.

    Here's what I installed, but it does not work.

    William, welcome to the forum.

    Did you check in "Control Panel / Sound" to make sure that your audio device is selected by default?  I had happened to me several times over the years. especially, if I made any changes to my computer.

    Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

  • Service Windows wireless suddenly stopped working because of problem with the KeyIso service

    Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

    Hello

    What is the antivirus installed on the computer program?

    KeyIso Description:

    The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

    Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

    Method 1:

    Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

    a. Click Start, type services.msc and press enter.
    b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
    c as. under the general tab, change the startup type to Automatic and click on the Start button.
    d. click on apply, then ok.

    Method 2:

    To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 3:

    You can uninstall and reinstall the network card and check.

    a. click Start, type Device Manager in the Start search box and press enter.
    b. locate the network adapters and expand the same.
    c. Select the Wireless connection, right click and choose Uninstall.
    d. restart the computer, if prompted.

    Drivers should settle automatically after the computer restarts.

    Now you can install the latest network card drivers and see if that fixes the problem.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Hope this information helps. Response with status so that we can help you.

  • USB mouse and keyboard suddenly stopped working

    My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:

    • Update of the chipsets
    • Uninstalling usb in Device Manager and reboot devices
    • Updated via Device Manager, usb devices
    • Reformatting and reinstalling Windows 7
    • Stop, unplug and allow the card mother "reset".
    • Try multiple ports
    • There is no 'connect' button on my mouse so I can not sure try this
    • Replace the batteries in my mouse
    • Obviously both devices have been connected
    • Updated the software for the mouse

    I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.

    Update
    I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.

    I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.

    Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.

Maybe you are looking for