Toshiba DT01ABA200 silent while copying or reading

Similar Questions

• My backup system to stop working on my computer: "backup failed from Windows while trying to read from the shadow copy on one of the volumes to back up.

  My back by abandoning work on my computer, it worked for the last 3 years and all of a sudden I have an error message "failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up. Please check in the case where the relevant error logs. "How can I fix this so I can get a full backup?

  original title: shadow copy error
  Hello
   

  See the methods listed in the article mentioned below and check with the question.

   
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455
   

  I hope this helps!

• Network error occurred while attempting to read C:\Users\Bob\AppData\Local\Microsoft\Windows\TemoraryInternetFile\Content.IE5\YFKRN3UL\owasmime[1].msi

  Can someone help me with this error.

  Network error occurred while attempting to read C:\Users\Bob\AppData\Local\Microsoft\Windows\TemoraryInternetFile\Content.IE5\YFKRN3UL\owasmime[1].msi

  It is causing me not to be able send emails at home through the use of the email of my work? Any ideas?

  You should contact the IT Support for your business to ask for help with that.

  This part of S/MIME is required for e-mail encrypted and other Marcelin with Outlook WebAccess functions and therefore the company email server is also involved.

  Rob

• While surfing or reading e-mails sytem lock up completely

  original title: computer hangs

  While surfing or reading e-mails sytem block completely, also sreen lock up then goes black and resume function, if it hangs completely I have to turn off and restart I ran a diagnosis it came back ok?

  Hello

  ·         What operating system do you use?

  ·         What version of internet explore do you use?

  ·         What mail client do you use?

  ·         What happens when you try to open internet explorer? You get the error message?

  ·         Since when are you facing this problem?

  Method 1:

  I suggest you follow the steps in troubleshooting section below and check if it helps

  Internet Explorer does not start or stops responding

  http://support.Microsoft.com/kb/926449

  Method 2:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Method 3:

  Perform an optimization of Internet Explorer on your computer from the provided article.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Hope this helps,

• They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Hello

  Its probably an alignment problem - that is, the Panasonic is written outside of the
  able to read DVD computer settings.

  Normally, if you want to create CD/DVD that can play on standard devices (for example
  like the Panasonic) the MASTERED format should be used. Does the Panasonic
  offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
  alignment problem. If the alignment can be defined in fact would cost more than the
  device being aligned (if you could find someone who could actually do).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Failure of Windows backup while trying to read from shadow copy on one of the volumes to back up

  Original title: how to fix the cliché has failed during the backup

  Using Vista Home Premium Svc Pk 2, I get the "cliché failed" and did not finish the backup.  How can I fix it?

  Hello
  1 did you change on your computer before this problem?
  Follow the suggestions and see if it helps.
  Method 1
  You can follow the steps in Windows upward and the startup type of the service Volume shadow on automatic
  (a) click Start .
  (b) in the search box type Services.msc
  (c) make a right click the service and go to Properties.
  (d) select Automatic from the Startup type of the menu drop down.
  (e) click apply and OK.
  (f) restart your computer.

  Note: Once you restart the Volume Shadow Copy service all restore points will be deleted.

  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  You can also run the disk check.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  Note: You may lose data while Windows tries to repair bad sectors on the hard drive.

  See also:
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Note: The article is also applicable to Vista.

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• Toshiba 32AV615DB reduce while watching her without touching the controller

  Hello.

  My TV acts as if there is a sign to extra distance.
  While watching, the sound will reduce without touching the controller.

  It is not possible to market. It will scroll together various displays.
  Buttons on the side of the TV do not work.

  You can activate the TV market, sometimes who will work for a while!
  Another day, it will work perfectly.

  Any suggestion is welcome.
  Thank you

  I found a thread that describes a very similar TV acoustic behavior:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70847

  It seems that the Dynamic Volume is enabled in the settings of your TV.

  + Audyssey Dynamic volume® control volume levels in order to eliminate the strong points and lift the soft dialogue for film and television more enjoyable viewing. +
  + In the sound menu, press up or down to select Dynamic Volume. +
  + Press left or right to select On or off.

  Check it out. Maybe it helps.

• Toshiba DVD - ROM SD-M1612 cannot read a burned disc

  Hello

  I have a problem. I wonder if anyone can help please.
  I tried to view a DVD-R on my pc using my dvd player which is a Toshiba DVD - ROM SD-M1612, but it keeps giving me the same error message:
  Windows cannot read from the disk, it is may be corrupted or in a format that windows recognizes.

  The disc was burned on another computer and plays very well on this and on a normal dvd player, so I excluded that the disc is damaged.
  After talking to some people, they suggested me update called firmware?
  I looked at this and can't find it anywhere on Toshibas support or downloads pages feel like looking for a needle in a haystack :)

  I have provided this figure as it apparently is the firmware that is currently installed on the pc.
  I wonder if anyone knows where I can get the current version and if it will help me perhaps discovered the burned DVD-R.
  TOSHIBA_DVD-ROM_SD M1612___1806___\5&C21666E&0&0.0.0

  Thank you for your time and help

  Derek

  Hello

  Sometimes this happens to me also, and to be honest it's nothing unusual.
  All CD or DVD is supported by the CD/DVD drive.
  I put t know what laptop you have, but in most cases the user's Guide provides information and details on the mids compatible and taken in charge.

  I ve experience with TDK CD and DVDs and I convinced Mr. I ve tired different CDs and DVDs from various manufacturers and all were not entirely compatible.

  The update of the firmware is not always a solution, but it is sometimes useful to improve compatibility. The update of the firmware can be downloaded from the Assembly of the computer.
  It seems that Toshiba provides updates of the firmware for the series of notebook clean on the European driver Toshiba page.

  To cut a long story short, try a few different CD or DVD from different manufacturers and check what support is no longer supported.

  Good bye

• While loop with reading of text file - calendar of events in a given period

  Hello world.

  I created a program that if serial interface via a port to a syringe push in my lab. Currently, the program reads in a text file-flow rate values and sends them to the pump, one by one, through various commands. I need to ensure that whenever a new flow rate value is sent to the pump, it does in a specific/hard time for a while. I.e. every 0.1 seconds, changes in flow rate and must are active until the next period. I tried to use a timed loop and I think I've succeeded, but it hogs system resources, so I was wondering if there was a way to do it using the number of cycles or something of this nature. I just started using LabView, so I'm slowly getting the hang of it (easy when you watch my VI!)

  See attached VI. I took orders from serial port and have instead orders display in an indicator. The nested and densely populated while loop contains the commands that need to be completed/last during the period (like 0.1 second).

  Thank you for your time and help!

  -Phebotalus

  Hi, you should read some introductory material on LabVIEW to down the idea of the stream.

  Basically, the data flow in the wires from left to right, and any node will not work until it has reached all of his contributions.

  The thread of the error is the best way to run data streams.

  ***

  In your VI I use data wires, their execution through structures, and forcing the structures to run in the sequence.  Using a structure of sequence you mentioned in your next post will force the two scripts to execute in the order of (the only one we discussed to be in race condition.)

  Similarly, for brevity, I would wrap the EMO and she is business structure in a single sequence and force it to run last using stream.  In this way the user has the most possible time to decide to hit the EMO before she is called by the application.  As it is now, it most likely is interviewed at the beginning of the loop, so if it's the exchange value you won't see results until the next loop.

  When running in execution of highlight you see the order of data flow, but that is not guaranteed to be the same for a normal performance, where the use of the data stream.

  ***

  The counter tick account ms up to a very large number and then "says" reset and start counting again.  I know you want to START the loop as close to every 10 ms.  Yes, using data flow, take the number of cycles first, perform actions, then return the number of cycles.   The second time of the tick read that you are in a nested loop that does not stop until you get 10 or more difference on the number of cycles.

  And, on the off chance that you must achieve "return" on the tick counter comes stops the nested loop then move.  (if the second measurement is less than the first, then the tick counter handed.  If you miss this situation while you'd have to wait a long time for the condition of the difference > 10 in the reunion, basically locked in the loop.

  ***

  You could put the EMO sequence, we have seen, in line with data streams.  Before or after the second control of ticks will not make much difference in terms of 10ms.  I would put it after checking the tick, again give the user more time to hit the EMO if necessary.

  ***

  I put in a queue for the stream error and removed the other stuff.

  LV2010

  Check out some of the LabVIEW intro docs, they are online, they discuss these issues and much more.

• Error 1316 a network error occurred while attempting to read from the file c:\windows\Installer\HP Active Library.msi of support

  HP Total Care Advisor PC begins with start up.  Recently, windows close program.

  I thought I found a solution that was told to copy the HP Totalcare Lbrary of c:\swsetup in c:\windows\installer

  The people who did this were delighted.  He has not worked for me HP has NO response that I think is outrageous!

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Toshiba cd/dvd drive will not read or eject or anything like that!

  Cd/dvd driver for my Toshiba laptop will not work. It lasted about a year, then he became gradually sporadic to read/write or ejection and by last winter, he stopped all together. I've uninstalled and reinstalled the drivers for it, and in Device Manager, it says that the device is functioning normally; every once in a blue moon it will suddenly eject, but then if you put something in nothing happens, even not with the original disks. With the repair utility, it says something like unreadable media, at best. I'm a little confused as to what is happening here, so, what steps should I take to verify if it is indeed the drive disc or something in the software?

  Thanks, Bruce

  Hello

  You may need to check with Toshiba Support, documentation online & drivers and their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• my favicon does not appear. in information-&gt; media-&gt; Type page, it reads the text/html, while it takes read icon. What can I do?

  I made a webpage in dreamweaver cs 5 and used this code to the favicon: < link rel = "shortcut icon" href = ' _images/logo - favicon.ico "/ >
  When I previsualisez in dreamweaver in the firefox browser, it is displayed correctly. However, it does not display when I visit the actual page. I followed the instructions of troubleshooting here on firefox who said that, when you go to tools, then the Info Page, then clicking on the media, the Type must be read as an icon. Instead it reads the text / Html. could this be the culprit?

  You're welcome, please mark this as RESOLVED issue.