Toshiba e-Studio 232 sharing with Vista

Hi, new to the forum, but it is a great resource.

My problem is the e-Studio 232 Toshibe printer/copier/fax.

Basically the problem must connect the scanner (SCAN) printer vista shared folder.

XP is not a problem, but on the same network vista clients get one is not allowed to conect error.

I guess it's down to strick lanman v2 Protocol vista uses, but after changing the local
policy LanMan under vista, I get the same refusal of connection.

Pointers would be apprecieated.

Concerning
MAX232.

Hello Max

Sorry, but I think you're wrong here. This forum deals with mobile computing and as you can see there is no section for other Toshiba products.
Maybe you should talk with your local dealer. They should have experience with the products they offer to customers.

Tags: Toshiba

Similar Questions

  • Toshiba Tempro does not work with Vista 64 bit Ultimate

    Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?

    Any idea where I can find a solution?

    Thank you very much

    Hello

    I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.

    But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
    OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
    There is a proverb which says: never change a running system.

    Welcome them

  • Problems w/Microsoft eHome keyboard keys on remote control on my Toshiba Qosmio X 305 - Q701 with Vista Home Premium 64-bit

    Hello, I decided to trust someone w / helping me to improve the performance of the system by closing some services using msconfig, although I have some keys on my keyboard that interact w / drive DVD from Toshiba in my computer for generic commands; Play/Pause, Stop, etc to jump to chapter. These keys do not work anymore, I looked at my device manager, and the only thing I can think of that would have to do with these keys is the Microsoft eHome Remote control device keys on the keyboard. I looked at its properties and it says that this device is working properly. Already, I went into msconfig and reset booting the normal start, restarted and nothing has changed. Help please

    Hi kozarman1,

    You should maybe download the latest drivers for the keyboard and check if it works.

    You can view the following link to update the drivers:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    For more information about ehome keyboard, you can consult the following link:

    http://msdn.Microsoft.com/en-us/library/aa940427%28WinEmbedded.5%29.aspx

    Hope this information is useful.

    Boumediene. K.
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to partition Satellite A300 - 21 H with Vista?

    Hello
    I have a Toshiba Satellite A300 - 21 H with Vista and dual you want to boot with ubuntu linux. At present, there are three partitions, recovery vista 1.5 GB, 150 GB C and 150 GB E (with recovery of HARD drive inside). My ubuntu, I would like to partitions / and / Home (about 150 GB). Should I delete the partition E? I have my recovery DVD's...

    What is the best approach, I think that linux is only 4 partitions.

    > Should I delete the partition E?
    If you created the recovery DVDs, you can remove HDDRecovery and use the second partition for Linux. When you want to install once again just use recovery media created Vista.

    If you change the structure of the partition, no doubt, you will not be able to use saved image in this folder.

  • Toshiba E-studio 160 - password LAN interface

    I have a toshiba e-studio 160 episodes, with the ethernet card.
    I have to change the tcp/ip options, I need to know the password!
    (please, do not ask why I don't ' know :_|) )

    I read somewhere that it should be possible to display the admin password by:

    1 feed the machine in TEST MODE (press 0 & 8 by turning on)
    2 enter 263, then press START

    Point 1 it of ok, but 2 is not ' return any information.
    The page where I read this trick was perhaps for another model, different e-studio 160, and so I have to type another number...

    I hope someone could help me :)
    Thank you

    Matteo

    Hi dude

    Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc.
    https://electronicimaging.Toshiba-Europe.com/

    Manual options choose please:
    Managers of document-> E - Studio 160

    Here you can find some instructions (network, printers, etc.) that might help with this problem.

    Good luck

  • comatibility professional version 5 Visio with vista home premium

    I have a Toshiba satellite lapto, that came with vista home premium. I installed visio 5 vesrson profession. But id does not run. I get a message saying that the problem of compatibility. What is happenning?

    Hello

    always check the compatibility of vista programs on the link below

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

    It is not compatible with vista, you can try running it in a previous operating system mode

    This does not work for all programs

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If a program is particularly important to you, there is this way of trying

    but it's expensive, because you must have a previous operating system license to install

    This method also works in vista Home premium, BUT is not supported by microsoft

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  • Toshiba secured 500 GB does not work with Vista 64 bit

    I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
    On the box says it works at least with Vista, but I can't install it.
    When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.

    Now, I've read that this device must be compatible with 64 bit OS
    http://APS2.toshiba-tro.de/KB0/OPT1103320000R01.htm

    What can I do to make it work?
    Why Toshiba still sell this device if it is not compatible with the current operating system?

    Is it possible to update the digital firm pilot?

    PS.

    The security problem is on:
    Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security

    Hello

    Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
    The software is updated

    As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
    Should work

  • Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

    I have problem with Vista - it became too slow so I want to get back to factory settings.

    I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

    I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

    And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

    Delivered using the recovery media, you will be able to install Vista.
    Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

    Bye and good luck!

  • Why Toshiba laptops are not supplied with the common Vista installation CD

    Our House now has two laptops from Toshiba x, which were provided with MS Vista Home Premium pre-installed.

    The nature of the medium of recovery provided with these machines is such that (a), we do not have enough flexibility to the volume/partition sizes, locations of program etc. and more specifically.

    It makes it necessary for the majority of the supplied software (Norton Security etc.) should be installed by default in the case of a system failure. (And immediately uninstalled after recovery! A useless waste of time).

    In view of the fact that a proportion of the price paid for each laptop must have included a cost for the Vista operating system, do anyone know if it is possible to get a recovery disk of master which consists ONLY of the operating system, and allows us the flexibility of configuration that was available when the OS was purchased as a separate product.

    In addition, please let me know if it is possible to buy Toshiba laptops as a machine to RAW, IE no BONES no provided, and I'll then buy my own and cut out the garbage that are provided on the pre-installed medium.

    Hello

    If you need a DVD of Vista as the original DVD of Microsoft Vista you will need to buy!

    Toshiba and other computer manufacturers create a clean recovery disk which includes the Windows operating system, the drivers, tools and utilities to simplify the laptop restore.

    Using the recovery disk, you can restore the laptop to the factory setting within 10 minutes.

    In addition, this Vista OS is supplied under OEM license and can be used with this laptop

    Concerning

  • Problem with Vista and XP computers Internet connection sharing.

    I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

    Thank you

    Oscar

    It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

    • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

    or:

    • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Tapping on Dell Studio 17 with Vista

    For some reason, when I type on my Dell Studio 17, with Vista, often different commands, windows, tabs in Internet Explorer will pop up.  Sometimes, if I type too fast, all my text will highlight and remove.  Is it possible to disable what seems like shortcuts?

    Hi tractorlucy,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  • I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again. How do I do that? Thanks in advance

    I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

    I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

    First, make sure the taskbar don't are not "locked"...
    Right-click on an open space of the taskbar > make sure there is no checkmark at "lock the taskbar".

    Now, make a left click inside of a space open to the taskbar and HOLD > drag the slider down until he goes back down > drop PREY > lock the taskbar. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Toshiba with vista touchpad mouse stopped working after the long sleep.

    I left my Toshiba laptop with Vista only for a few hours and when I came back I had a lot of difficult to resume. When he did power to the top of the screen is fixed to the external monitor, and touchpad mouse will not work.  I did a system restore to several days ago, but it did not help.  I also installed service pack 1 and 2, hoping that would be useful, but it did not.  What should I do to get the touchpad mouse works again? I have the back of the screen, but not the mouse.

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    Read the info on sleep disorders in the tutorial above.

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Also read this tutorial; as well as the 'related links' at the bottom of the links above.

    See you soon.

    Mick Murphy - Microsoft partner

  • I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

    I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

    A question = a post in these Forums.

    http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/465e87c6-5289-4027-B414-7251bdfecc0e

    Answered in another Thread.

    Mick Murphy - Microsoft partner

  • All my folders are shared with other users and Vista won't let me stop sharing. Help, please

    All of my documents folders are automatically shared with other users and I can not change when I try to change, I get "you can not stop sharing the selected folder.

    I changed the ownership of this files but still not able to stop sharing.

    Try this.

    Right click on one of these files > select sharing with > select person.

Maybe you are looking for