Toshiba L 40, 7335 does not start

Similar Questions

• Toshiba Satellite L70 - B does not start the BIOS or OS

  Hello

  I changed the same parameters (UEFI priority CSM to start: FIRST USB) in the Bios and saved them, now computer laptop does not start, I can't enter BIOS more... Just see a black screen... I tried to remove the pulp and power, clicked on the power 1 m button, but nothing has changed...

  I can fix this please

  Laptop model: Toshiba L-70-B

  Any help please?

• Toshiba Satellite Pro 6100 does not start

  Hello
  I used a Toshiba SP 6100 until a few weeks ago because it started to act weird. It would not start at all, I called an authorized service center but they wanted me to pay 900 euro for a new motherboard, so I bought one off ebay ;-)
  with the first motherboard (the original one it came with) the DC leads IN was and recharging the battery but it wouldn't let me turn it on.
  With the second card of mother seeing him IN DC was on and battery LED was blinking pretty fast (then I was confused).
  Now I have two all lower parts (each with GF4 GB and P4m 1, 6 GHz) that doesn't quite work.
  Do you have the solutions for this?
  If so I'd be happy :)

  Daniel

  Hi Daniel,.

  Your description of the problem in your original motherboard certainly indicates a card failure. What worries me a bit is at the origin of the new motherboard.

  Your new motherboard will also include the CMOS chip that will contain your BIOS. I can only assume that the new Board of Directors contains a default BIOS rather than a suited to your Toshiba laptop. An Agent of Service Toshiba has special techniques for loading the BIOS OK to activate the new motherboard work.

  You should check with the provider of your new Council what BIOS if one is loaded.

  HTH

• Station service does not start automatically

  Hello

  recently the Toshiba Service Station application does not start at startup of Windows (8.1). If I run the application manually, it works normally.
  I would like to restore the automatic start of this request. What can I do?

  Hello

  Open system configurations > startup and check if Toshiba service station is on the list.
  Control Panel > administrative tools > system configuration
  If Yes, check the checkbox in front of it. Restart your computer and check please if gas station will start again.

  With restart, I mean you need to complete your machine stop.

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• TOSHIBA HWSetup in Control Panel does not start

  All the updates of Bios, drivers, WindowsXP SP2 is installed. The utility called "TOSHIBA HWSetup" does not start from the control panel. Could use some help here because I like to adjust some more advanced settings of my laptop.
  PS: How can I access the Bios settings?

  Hello

  I put t know which model of laptop you have, but in my opinion, you should try to remove this utility and install it again. You can download it from the download from Toshiba site.

  Try to enter the BIOS settings using the ESC key at the beginning upward.

  Good bye

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.

• Re: Tecra S5 does not start

  After the upgrade to win7 and sometimes having a blue screen when you start the following happened.

  After blue screen once more, laptop is not starting at all.

  The only thing that happens is that I see the upstartscreen (in touch with tomorrow TOSHIBA) and the icons at the bottom of the screen indicating the readers. Nothing happens any more, it does not start doe.

  I can change by tapping F12 in a new boot through the CD rom boot procedure, but there is also no effect.

  Also, it is not possible to enter the bios (esc + F1).

  The keyboard works because, after a while each touch result is a short "beep".

  I removed the battery for a while and tried again with no results.

  If I can put my laptop by the ore basket is there a possibility to bring it to life

  Thanks in advance, Jos

  On this virtual path, it is not easy to offer an accurate diagnosis, but somehow, I feel THAT BIOS is doomed.
  Unplug the AC adapter / CC, remove the battery and press the power for 20 seconds. After doing this only connect the power supply and restart your laptop.

  I don't have this model of laptop and I'm not sure to get into the BIOS but try also with F2.

• Still 2 WT10 does not start

  Hello

  My Encore 2 WT10 lights. I updated the bios to 1.4 via the USB port. It does not start after the upgrade. The screen remains black. I can load and reload my mobile phone via the tablet or a USB Hub to power. If I press the button for 30 seconds, turn off the USB device, press the button again turns on USB power. But the screen stays black, no screen BIOS or Windows, no audio or USB data connection (or other signs of life).

  I think that my tablet is in soft-power-off mode. How can I hard-power - off the shelf without removing the battery internal?

  Try to open the BIOS/UEFI tablet settings by following these steps:

  Press and hold the volume button at the same time by pressing the button for a few seconds. Ideally, this will open the screen of the BIOS/UEFI. Once this is done, make sure that the settings are correct or restore the factory settings.

  If that does not help, then additional assistance may be required.

  In a similar way a lot, the splash screen appears where you can recover your tablet from an image that you created previously (recently) or in the worst case, reinstall Windows.

  Also keep in mind that between reboots, a 10-15 minute interval may be required (don't know why, but it helped me dealing with errors in the past).

  My impression is that the BIOS 1.40 was already installed in the WT series, so some models have been improved to 1.60. BIOS should normally updated via WIndows Update or Toshiba service station.

  Hope this helps

  BR

• A60 Windows XP does not start

  When XP does not start, he spends just continually rebooting.
  None of the options to restore the last known good configuration or from different modes of security work.
  The error message is:-
  UNMOUNTABLE_BOOT_VOLUME
  The Microsoft Knowledge base says that XP CD-ROM to access the Recovery Console is necessary before running chkdsk/r, but because XP was installed by Toshiba OEM factory, is not available.
  Can someone guide me to a solution.

  Dave Cox

  Hi Dave,.

  If you don't already have a bootable CD, then you will need to create one (using another PC of course). Try to Google for "Ultimate Boot CD". It contains many tools and utilities and can even be bought if you don't have the means to burn your own version.

  You will need the means to back up your data once you have access to your HARD disk, although you can see as you drive is inaccessible in any case. This will depend on exactly what the problem is with him.

  To boot from the CD (without changing your BIOS) Toshiba have a shortcut. Simply hold down the 'C' key while turning on your laptop and the device will try to boot from the CD-ROM. It also works with the recovery CD.

  Good luck

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Satellite M840-A764 does not start

  Hi all

  My laptop does not start, there is no power in the laptop.
  I removed the better and the charger and press and hold the power button for 1-2 minutes, but nothing happened
  So, it would be very cool if you guys find for me the solution.

  Thanks for reading. \
  Best regards, Yazeed.

  Hello

  You see the Toshiba splash screen?
  Y at - we indicators?

  In the best case, just a small part could be faulty as adapter or module memory maybe but in the worst case the related problem of the motherboard.

  Guarantee is valid?