Re: Satellite L500D - cannot get the optical disc drive to work

Similar Questions

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• Get the old hard drive to work on the new processor

  I am a PC Tech company with problems on PC at home.

  My Win 7 Home Premium Dell Studio T435/9000 dead.  It was a motherboard problem, I chose not to replace the CPU/Mo with a duplicate.  The hard disk MBR is good, I could read it and when I installed in an Optiplex 990 at work, it is initialized.

  I had the chance to receive a new Dell T5610 with 2 CPUs of a parent.  It came with professional Win7 preinstalled on an SSD, UEFI boot on a GPT disk.  But all my apps are absent and even a rat-pack obsessives like me do not have all the CD and install the files for the various applications on the old hard drive.

  I want to use my old hard drive on the new PC, then after that it's stable, migrate the old hard drive to the SS disc supplied with the PC.

  First problem was to learn the differences between MBR and GPT.  After this was learning that Home Premium does not work on a PC with two separate processors.  I use Win7 professional for that.  With the help of this forum, I was able to do this by using the Optiplex 990.  I run Win7 Professional on the Optiplex 990.

  I take the former home of hard disk go BIOS to legacy.  Old hard drive that boots on 990, does not start on T5610.

  I try various advanced options, safe mode, low-resolution video, nothing works.  I get a BSOD is a hard drive error, STOP 040000007 B.

  I try Startup Repair tool and get the following:

  Problem event name

  Offline Startup Repair

  1 6.1.7600.16385

  2 6.1.7600.16385

  5 Autofailover

  6 1

  7. bad driver

  6.1.7601.2.1.0.256.1 OS version

  Locale 1033

  How can I get my old hard drive to work with the new processor.  Is it a question of Dell, a Win7 Office.  As the hard drive starts up successfully on another CPU, I believe that the hard drive is good.

  Thank you very much for your help!

  Thanks to you all.  But the solution was completely different.

  Dell said the motherboard on the accuracy was so different from my old PC that unless I reinstalled Win7 Professional from scratch on the old hard drive, motherboard would not work with the old hard drive.

  They have guaranteed that the old hard drive would work on a 8700 XPS.  After some problems, I managed to do the work.  Problem solved.

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• Satellite L650 cannot get the Gigabit connection to switch

  I tried to connect to the Netgear gs108 gigabit switch but cannot get a connection of 100 Mb. have updated drivers Atheros AR8152 version 1.0.0.26 Win7 64 bit running but still no go.

  All ideas

  Thank you Rich

  Hey that's great that you fixed the problem yourself!

  If you have other questions you're welcome in the forum :)

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

  Hello

  the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
  The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
  risk to get damaged?

  I would be very grateful for each tip and all the help guys can give me!

  Best regards
  a.z.

  Hello

  In various cases the ODD replacement is very delicate.

  If you wish, you can consult this forum category.
  Here you will find some videos how to replace the ODD on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

  This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
  http://www.YouTube.com/user/toshibaeuropesupport

  But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
  But make sure that this!

• Satellite A300 - cannot read the second HARD drive

  Greetings from the Spain,

  I got 1 month there is a serious problem with my laptop (which is 5 months old), associated with crcdisk.sys.

  I gave up after several hours studying, and send the computer serving techniques. (Vista was does not load and no recovery was possible)
  Technical services changed 1 hard drive and the motherboard (don't ask me why)
  This computer cams with 2 HD (these 2 devices)

  The first has a recovery partition.
  The problem now is that I see the second HD (D :) but I can't read or access it.)
  However, McAfee, it can scan and I can see the names of files (they were there before sending it to T.Service) during the scan.

  The only solution I have Toshiba is "send it back", but with the previous experience I've had with this guy, maybe now they put a new keyboard and wait another month...

  Any ideas?

  Thank you

  _Update_

  Now I can read the second disc of Internet expolrer..., i.e. D:\documents... I read a few videos, I got there and seems to work.
  However, I cannot read with ordinary windows Explorer or cannot write files from any program.

  BTW. I can access from the Explorer, but just the files, i.e. d:\documents\letters, but not to the root?

  You have installed the laptop with the recovery disk? Try this!

  What operating system do you use? If you are using Vista control this information from Toshiba:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?

• Cannot get the cd/dvd driver for CD playback

  Hiya

  Earlier this year, my laptop has been infected by viruses, malware, etc. I used the program Spyware Doctor to remove any infections, but so many files and programs are removed.

  On the Device Manager CD-ROM/DVD-ROM driver TSSTcorp DVD +-RW TS - L632H ATA Device ended up having a typical yellow mark next to it and the cd player would not read cds or dvds. Somehow however his custom 'fixed' itself, but always play all discs.

  Light to the factory side, it opens and closes, and when a cd is put in it sounds as if its going to do something, but after a few seconds only stops and don't open the program or recognize the drive. I read through many responses of forum and things like delete upper and lower filters do not work as they are already not.

  Advice or answers will be very appreciated!

  Hi sugar_owl,

  1. run the troubleshooter from the link, below, you can see the link below:

  Hardware devices do not work or are not detected in Windows:http://support.microsoft.com/gp/hardware_device_problems

  2. If this does not help, you can uninstall and reinstall the CD/DVD drive:

  To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note that if control panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

  Original title:

  Aloha!

  I have a Toshiba Qosmio x 775-3dv78 running Windows 7 Home Premium x 64.
  Similar to another old post here, I have an intermittent problem where the Toshiba Power Saver software is off the ODD (a Matshita UJ240EF - BD - RE) and I am unable to turn on the power.  To put the ODD back on, it's a matter of restarting (sometimes several times) until the STRANGE somehow turns on.
  Sometimes, when I do a hot or cold boot, a window opens asking me if I want Toshiba Power Saving technology to turn ON the ODD.
  I click 'Yes', but the drive remains switched off.
  I also try to use function - same key controls... The STRANGE remains turned off.
  Here are the "best":
  As described in the former post office, inside the Windows power settings, there is a slot layout titled "TOSHIBA Power Saver Settings v8.9.9.64".
  In this context, normally there is ONLY a framework for 'cooling method.  BUT only when the ODD is disabled, a second parameter appears to "Optical Drive Power".
  Change that on ONE for battery and plugged in fact NONE no difference... The STRANGE remains OFF!
  Toshiba support is of no help.  Their answer to this problem is to run a 'Mr Fixit' which I discovered just unrecognized devices and then removes the upper and lower filters for the reader.  This "difficulty" might work from time to time... when it does, the ODD is somehow transformed into a 'removable' instead of one device ATA device.
  But then in a few days, the STRANGE turns off again.
  Something different maybe notable, I found after that I continued services and the related process, programs is that the version number on the Toshiba modules show "8.9.6" - not the "8.9.9.64" in the window Power Options.
  And before you ask (LOL!) what's happening on a soft reinstallation of the operating system by the media of recovery Toshiba with all Windows 7 updates applied.
  While I'm waiting for a possible response, I'll do the following:
  Uninstall and reinstall all THE software Toshiba provided duty with the STRANGE (energy saving, combustion, players, etc.)
  I will also shoot material part and make sure that the STRANGE is well inserted in the connector (IDE?) and that the connector is firmly attached to the motherboard.
  IF who does things, I'll update this message and inform you all.
  Otherwise, any ideas would be GREATLY appreciated!
  Mahalo!

  Hello

  Method 1:

  Run the electrical troubleshooting utility and check.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  I suggest you to change the power settings and check.

  a. click the Start button, type Power Options in the search field and then click on Power Options in the list of results.

  b. click on Change Plan settings for power management already select.

  c. other click on change advanced power settings

  d. expand TOSHIBA Power Saver Settings Vxxxxx and change the optical drive power managementsettings.

• Cannot get the PDF2ID plug-in to work.

  I bought the PDF2ID add-on for Mac and installed using the InDesign extensions Manager.

  It's in the Extensions listed as PDF2ID Lite 4.0.1 Recosoft Corp. Manager.

  InDesign Recosoft has among the drop down menus. I clicked and I get the following error message:

  PDF2ID can not detect the PDF2ID folder. The folder was moved from its previous loacation.
  PDF2ID requires that the files in the folder to use. Navigate to the folder PDF2ID from dialogue that appears. (2002)

  I haven't moved all folders. This dialogue is displayed, locate the PDF2ID application folder.

  I did a search, there is a folder PDF2ID. A InDesignPlugin that contains versions and resources as well as a "grayed out" Unix executable files. Which satisfies this request either.

  And now I'm stuck.

  Gregg Fisher

  gfisher@adcomm. TV

  Mac Pro |  10.8.5 OSX | Adobe CC

  Following this PDF2ID problem.

  I got instructions from Recosoft and the plugin works fine.

  The problem was that I had used the trial version was that collide with the PDF2ID plug-in.

  If anyone has this same problem, please email Recosoft to [email protected].

  I must say, the plug-in has been spare me steps.

  Gregg

• Blog customized in Adobe Muse and British Colombia cannot get the body copy css to work

  Hello

  I created a blog through Adobe Muse and Business Catalyst customized instructions, I found in a video.

  Seems like everything works most of the time with the addition of styles custom to modulestylesheets.css however, not for the life of me I can get the text of the

  blog to cooperate. At least according to the video I am following.

  It's the css instructions, I add, and it is the only part that doesn't work - will not change. My guess is something somewhere else than this horse, but I'm not.
  
  / * body of the blog text * /.
  . post-Corps
  {
  color: #534741;! important;
  Police-family: muli; without-serif;! important;
  do-size: 12px;! important;
  Police-weight: 400;! important;
  padding: 0;! important;
  line-height: 84px;! important;
  }

  As you can see - I even added the tag to see if it would work, but still nothing. I am at a loss and need to have this site complete and launched with new area tonight!

  The link:
  http://lisastendig.BusinessCatalyst.com/embodiment-blog

  I'm trying to get the copy of body to be the Muli police but also with a few good Interline spacing.

  I hope that someone can help you today - so it would be very appreciated. Thank you!

  Hi BubbleHouse,

  I checked the layout of details of blogs and seems family of police entered the embed code of the blog and it is preceedence containing the css system.

  You can go to the blog content and change the font family: calibri, serif police-family: inherit, it should take the modulestylesheet.css police

  Kind regards
  Radi amin

• Alienware Area 51 R2 (end of 2014) ejection of the optical disc drive does not

  New Alienware Area 51 R2 (end of 2014) happened the month last in January 2015. Not tried any DVD or Blue-ray until yesterday. The optical drive eject button does not work in windows pro 8.1, but soft eject works in click with the right button on the drive and select "eject". The button works also before starting Windows start. I invited it must be a software problem and could be fixed by updating some drivers. But I googled a lot and can't find solutions for other Alienware models, but not for the Office of area 51 R2.

  Bluetooth also does not work, but fixed with a new driver from Intel.

  Install the driver from the disk...