Toshiba Store Alu 3.5 "1 TB external USB HARD drive does not

Similar Questions

• Why toshiba hddr250e03x usb hard drive does not appear

  OS xp sp3

  Is this a new drive?  Use the built-in disk management tool to prepare the drive.  To start the tool type diskmgmt.msc in the box run from the start menu.

  John

• My external USB hard drive was not recognized. Difficulty?

  The subject line says all this.

  It is important that I have access to the XHDD. That I am I missing that will make this happen via a USB connection?

  Ok. When you connect your XHDD for the WinXP, you should be able to see it using the workstation.

  You should also see an icon and icons for your CD-ROM, disk, nextwork and speaker in the lower corner of the WS7 similar to the following.

  Right-click on the icon XHDD next to the "speaker" icon and select Connect (disconnect from the host) for you disconnect from your XHDD of the host (WinXP) and connet to the virtual machine (WS7). You can also right-click on the icon and disconnect (connect to the host) to return the XHDD to the WinXP.

  I hope this helps.

  -Allocation of points if you think it is 'Useful' or 'Correct '.

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• External USB HDD cable does not match of Satellite A200 USB ports

  I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
  The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

  Can I get an adapter, or try to find a rope?
  HARD drive uses USB 1.1, 2.0 or Firewire port.

  Thank you!

  What?

  Sorry, but I don't believe that.
  The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

  Are you sure you are using the right cable to 100%?

  It should looks like this:

  [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

  and these are typical USB ports:

  [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Seagate 2 TB external hard drive does not register

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  I'd appreciate any help you can give. Thank you!

  Riley G. says:

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  If it shows in disk utility > file >Mount

  
  

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• backup external hard drive does not not to 8.1

  Updated to 8.1 and now my external Iomega hard drive (for weekly backup) now does not work. He appears in the "devices", but then backup will not recognize it as a valid to continue my backup option. Suggestions please?

  Hi UKPOL,

  Please refer to the how to Geek article.

  8.1 win can't stand a GUI for the backup files or imaging system. You have to use powershell or Win 8.1 reset/refresh options.

  You can also create custom refresh images. See this article. The instructions also work with Win 8.1.

  You will need to use third-party backup to back up files and folders.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.
  
  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.
  
  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.
  
  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• External USB HARD drive Stor.E basics Sleep Mode

  Hi all
  Recently, I bought Stor.E Basics 500 GB USB 3.0 external hard drive to store my archives of work (mainly the .docx and .xls formats).
  During my work after maybe 5 or 10 minutes, my drive HARD past in mode "sleep" and it takes time to wake up my drive and resave the file. Is there a solution to my problem? I need to disable the Sleep Mode.

  A few things I've tried:
  (1) I tried to use 'Always On' profile in the control panel power option
  (2) off "Allow the computer to turn off this device to save power" devices-online all storage devices Usb root Manager.
  (3) and also disk management-properties-hardware-online HARD drive-online policies online online => optimize for performance.

  OS - Windows XP SP3.
  PS Sorry for my English.

  Do you have the same HDD like this one?
  http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/basics/

  This HARD drive has need of 900mA power supply.
  This means that you need a USB 3.0 standard or 2 x USB 2.0 ports

  I think that if your computer supports support only USB 2.0, you must use the USB cable to Y which allows you to connect 2 USB ports HARD drive.

• Re: Boot from external USB HARD drive Toshiba 320 GB (MK3259GSX)

  I have PC (Windows7, SATA HDD, without CD/DVD drive), netbook and Toshiba External USB HDD 320 GB (MK3259GSX). Can I boot from the USB HDD? (to install OS or diagnostic tools like Memtest, MHDD etc..)

  I tried:
  1 format USB HDD, create the FAT32 partition and make active, copy the files, for example, ISO image of Windows 7 (I also tried bootsect/nt60), but when I reboot and choose from the menu of boot USB HDD it stops after "Verifying DMI pool data".
  2 Grub4dos (http://grub4dos.sourceforge.net/wiki/index.php/Main_Page), but also had nothing after verifying DMI pool Data given.
  3. If you want to install Windows 7, I tried this tool, http://store.microsoft.com/Help/ISO-Tool, but it did not find my USB HDD.

  Sorry for my English.

  Has your computer laptop USB boot option?

  Anyway, is unclear to me that you can use this disk external DRIVE for the installation of the OS?

• TOSHIBA PX1267E - 32 1 external HARD drive does not: seeing flashes blue/red

  Dear reader,

  I have a drive external HARD of PX1267E - 1 32. It worked fine for a year or two. Now, it started to malfunction.
  The light which should show current data traffic, now blinks red/blue (by changing half a second). When I connect it to the PC, it is a sound of connection, and a sound to unplug a few seconds later (it continues to repeat this once in a while).

  Anyone know what is happening, or what I need to do? More importantly, I need to know if it is worth fixing and if its even fixable.

  Thanks in advance!
  Freek

  Same here with my drive toshiba 320 GB external hard... S/N: 1103060475 / PX1223E - 1 32

  It just happened last week. All of a sudden you hard drive went from blue to red.
  And the computer no longer recognizes.
  So it worked out perfectly. No problem at all.

  Looks like it is a problem in Dutch? And that's happened with Freek and me at the same time?

  How can recover us information that is still on this subject.
  Because the case where the hard drive is there... just can not be opened.
  So we can't pull the hard drive from the case.
  Someone at - it also have a useful answer in this one?

  After you install a new device driver, it is also always recognizable not on my pc.
  Toshiba Harddisk can be seen in my computer, but played cannot enter or read data about...
  It works, but no data is recoverable more because of a problem in the i/o device so he says...

  Who can help us both... because it looks like I have and Freek have the same problem, and both live in the Netherlands. ;-) Perhaps both a bad Live Essentials Windows Update done?

  Unfortunately, the warranty is just late (1 year) because it was only guaranteed for 2 years
  So, it's no choice more :(

  Please advice us ;-)

  -How we recover the data on it. Brand, it works again?
  -How to open the hard disk to retrieve the disk and put it in another case...

• TOSHIBA external hard drive does not work with Mac

  Finally, I used my Toshiba external hard drive on my MacBook Pro in December. I want to keep all my photos, and I've always been able to add new photos to it and delete the 'old' out of it. I plugged it today to add more photos, and it is not letting me. I went to the sharing & preferences and he read that when he used to say, read and write. I went to the info, and I noticed, it says that the format is Windows. Why he did change and why can't I use it? Can I fix it? Thanks in advance

  Looks like you have formatted the NTFS drive that is read-only for OS X. Copy data to another drive, then partition and format the drive correctly for use on a Mac.