Toshiba Tecra A2 - TONE TEST FAIL

I have a problem with the MODEM! (new Toshiba Tecra A2, Windows XP Pro, SP2)
Toshiba PC Diagnostic Tool - the Modem test:

1 modem Controller Test - fact - Pass
2. test tone - done - FAIL!

I read everything on your page (forum) and you do not provide an appropriate solution. Many people have the same problem!

For example:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2191&MessageID=6099#6099

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=474&MessageID=1132#1132

So please tell me where is the problem?
What should do? Some new drivers of your company?

1. check if the modem is entered in the Device Manager
2. check if the modem is configured and that it works?
The Control Panel must be open and go to the phone
options of modems and. It should be your modem!
If it is not shown to you, then you must install the
modem driver.
3. double-click on modem and go to the Diagnostics. The
modem query button queries the commandments with
check the return signal. This will give you some additional information
the modem works properly.
4. then set up a standard dial-up connection to your
provider of
5. go in the properties of the modem (Device Manager) and the
Check the brand in the "wait for dial tone before dialing" has NO
been resolved!

Everything has been done! Query was OK... everything seems to work... I tried so many different solutions... Please tell me you have something for me, it works... don't answer me to simply reinstall my windows! Where is the trap!

Hello

Is there any problem in Device Manager with the modem? There is a yellow question mark? I'm not 100% sure but I think that you will always have this problem with test tone if the modem is not properly plugged into the phone line.

Have you ever had some problems trying to make the connection to the internet provider?

Tags: Toshiba

Similar Questions

  • Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

    I recently bought a used Toshiba Satellite pro A10.
    When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

    Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

    "ERROR IDE #0".
    Intel (r) bootagent, FE v4.1.09
    Copyright 1997-2002 Intel Corp.
    PXE - E61: Media test failed, check that the cables
    PXE - M0F: Exit Intel Boot Agent
    Insert system disk in drive
    Press any key ".

    HI Tom,

    The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

    Kind regards

  • Pavilion 2206TX: hard drive DST short test failed

    Hard drive DST short test failed.

    For a few days, my laptop is not starting.

    Run the diagnostics showed "hard drive DST short test failed.

    I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

    I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

    Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

    Help, please.

    Hello

    Yes, you can use your friend recovery media in your. It should work.

    I'm not able to find a recovery media for your model of third-party vendors too.

    No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.

    Concerning

    Visruth

  • How to clear the power on password in Toshiba Tecra M3

    Hello

    I * Toshiba Tecra M3 *, my wife set * power on password * and she forgot what was the password. Everytime I turn on my laptop it's toshiba Boot logo and then it comes black page and the password required like this:-* PASSWORD = *.

    I sent it to the PC technician but he failed to fix it, he said, it is best to clear the CMOS settings, but it didn't find there because maybe he thought his old similar notebook that has battery; I told her my laptop is a computer laptop last may he joined the CMOS chip with its battery.

    * Any help please, I have valuable information in my laptop.*

    Thankx

    Allytz

    Hello

    I think you're talking about the BIOS password...
    Bad new budd... the password of BIOS should be removed by Toshiba ASP.

    You may not remove if you forgot!

    Then, contact the local ASP and ask for later handling.

    Good bye

  • M476nw: Color LaserJet MFP M476nw Fax Test failed

    I bought a new LaserJet M476nw, but my fax test fails each time through the configuration laserjet and HP utility software.  The Laserjet Printer is connected on a network and using Vista.

    I have a dedicated fax line that is connected into the socket on the icon with the socket at the rear of the laserjet printer.   I can hear the tone on the fax line when it is connected to a phone.   I called the fax line and it's normally rings and no response.   I also tried to connect a phone to the phone laserjet icon, while the fax line is connected to the laserJet printer, I hear the tone of the phone.

    I don't know what I have to do to get the fax test to pass, so I can start fax on this machine.  Any suggestion is appreciated.

    Mike

    In fact, this problem is now solved.

    It's a whole new machine, so since I didn't really have all the data I did a restore to return by default.  It restarts and now he spends.

  • Need to remove the password on Toshiba Tecra A8 BIOS

    Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

    Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

    You must send in a center of Service from Toshiba for password removal. There's no other way.

  • SMART short test failed

    Under hardware Maintence diagnosed and he tells me that the SMART short Test failed what it means and how to fix this

    I think that trying to DEFRAGMENT a hard disk 'default' is the wrong thing to do.

    Compare to the conduct of a dirt road with Bald tires - while the Bald tires may be OK on a dry, paved, road between them work "hard" will result in a failure of the tire.

    Similarly, many files on the hard drive when it is expected to be soon to fail, is also a bad idea.

    Any small computer boss store can sell you a hard drive brand new and may try to "clone" of 100% of the hard drive of the 'old' drive on 'new' disk

    Price?  It depends on the capacity (250 GB? 500 GB? 1000GO? 2000 GB?).

    About US $100, you will have a new disk drive with a capacity greater than your current drive.

    Add $50 to $100 US for the technician:

    Open the computer case,

    * Check the physical size and the capacity of the old-disk drive, to recommend a "compatible" replacement

    * Fix temporarily the new discs,

    * run the software "-disk cloning."

    * delete the old records (and he will give it to you, so that you can literally hammer it, so that no one will ever be able to read one of your folders – think 'security'),

    * connect permanently the new disks.

    * close the computer case,

    * test it.

    It also depends on the "age" of your computer.

    If it is still running Windows XP or Windows Vista, it will be over ten years - REPLACE a computer of this type.

    rather than spend more than US $150 to keep until something else died of "old age".

  • 15.04 Ubuntu brightness keys do not work on Toshiba Tecra

    Hello!

    I I m install the new version of Ubuntu 15.04 in my computer toshiba tecra laptop.
    In this version the brightness keys to work but do not to set the brightness of the screen.

    Possible I have ts to solve this problem?
    Thanks for all the ansvers!

    Sorry for my English!

    Good news!

  • Toshiba Tecra A3 - problem with Port Replikator III

    Hello

    I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

    any help is much appreciated
    Thank you
    Mario

    Hello

    As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

    Good bye

  • Toshiba Tecra M2 - very slow performance

    Hello

    During the last quarter of 2004, we invested on two Toshiba Tecra M2 with Windows XP SP2 and standard generation of Tosh.

    In addition, laptops are configured for our use and loaded with the following software:
    * MS Office 2003
    * Autocad 2002
    * Photoshop CS

    Configured for our use and now affected by a shift of noticeble during the task execution when:
    * opening closing documents MS Office 2003 Pro power switch of the network)
    * create opening files and of new designs/plot in Autocad 2002 (with the latest service packs and patches loaded)
    * loading Photoshop CS and various applications.

    Because of the date of purchase of these laptops, we were informed by our reseller, we cannot return these items. Now, we're certainly stuck with them, but I need to find a solution as to why they are slow in performance, fix it right and lie to my peers.

    Thanks for your time.

    Laure

    Hi Philippe,.

    As far as I know there are Tecras with several specifications. Can you please tell us are you?

  • Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

    I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
    Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
    I can change it via power or Administrator Options.

    Hello

    Maybe you didn't install VAP (value added package) for all user accounts.
    Please reinstall VAP by using your user account.

    You can also check if the user account is the Admin right supported.
    You can run simple applications (exe) as an administrator.
    For this, he must right click on exe file (value package) and should choose + Run as administrator. +

    Check it!

  • Toshiba Tecra 9000 noise

    Hi all

    I just bought the Toshiba Tecra 9000 Pentium 3 1 GHz, 256RAM of ebay. The problem is that after the start of some video applications or sometimes even opening new Web site which is in Macromedia Flash, I hear a strange noise, which I think is the hard drive. The sound is similar to the CDROM when you put there CD and he starts reading.

    Maybe someone has any suggestions about who and can help out me. Maybe I have not configured something right.

    Thank you in advance.

    Hi mimi,

    have you bought also the recovery and the tool & Utilities CD with the laptop? To exclude a software failure, you need to retrieve the laptop!

    If you do not, you should your system clea. Perhaps it is a program which read or write to the hard disk at high speed!
    Theo Bye

  • Toshiba Tecra 8000, monitor problem

    Hello

    I have a problem with my laptop Toshiba Tecra 8000, there is a green line with a width of 1 pixel on the screen of my laptop which does not disappear. the laptop is almost 2 years old. is there a possibility that it could be repaired? Thanks in advance,
    Mark Kuiper

    Hello

    interesting would be if the green line is permanently on the screen during startup or 'just' that Windows runs.

    But never mind, the laptop Tecra series three-year warranty.

    So in this case you can give it to a Toshiba repair for a control center upward.

    Good bye

  • 3G on TOSHIBA TECRA A10 - 13I

    Hello
    My Toshiba TECRA A10 was XP and the Broadcom Mobile 3 G was OK, f3507.
    Since I've upgraded to windows 7, it is impossible to connect.

    I loaded the 3 programs on support of Toshiba.
    The Wireless Manager won't launch and shut down.

    Sorry for my English! and thanks for helping me

    Roland

    Hi Roland

    You have chosen this question as answered.
    You always have this problem with the 3G?

  • Toshiba Tecra A10 - 11 M 3 G modem

    I have a Toshiba Tecra A10 - 11M and a modem 3G integrated F3507g I gave diagnoses.
    Which means that "Radio attached"NO? '" Here is the picture.

    Is this a problem? Or wrong? To enter service? Thank you

    Hello

    This message indicates if the card can be connected to the internet service provider. With other words, it shows that your card is not compatible with the available provider.

    So what you need to do is to contact the provider of the internet and to clarify this point.

Maybe you are looking for

  • Spectrum 13D - 3000 ultrabook: cut the light and the wlan light always on

    My system just upgraded to version 10 1607 windows. It works fine except light mute and wlan led on that both remain.  The keys work, but the lights stay on, regardless whether the audio is muted or airplane mode is on.   Seeing CAPS works very well.

  • Dysfunction of graphics on a Satellite 5200 801

    I have a Toshiba Satellite 5200-801 (nr.PS 520-31P1D-PT) with the following problem: After pressing the button operation, the screen shows vertical stripes, alternately, with large rectangle B & W points. After Windows XP spit and the only thing I ca

  • BlackBerry Smartphones MSN

    Can someone tell me how to download the MSN app use while it is running? I guess when it is open, but being not used it does not use anything, only when messages are sent and received. Am I correct that?

  • app VLC no video

    No video in vlc windows 8 app only noise, doesn't work very well on hemen office but not in the patching? because I think the app is simple and cute

  • Store in Ipad data

    Dear friends,IAM creating an IOS app with air for IOS. I want to store the data in a txt file and then pull it out. IAM using the following code:flash.filesystem import. *;import flash.events.MouseEvent;var cacheDir: file = null;tempDir var: file = n