Total empty general

Similar Questions

• Satellite L10-104 does not start after the battery totally empty

  Hello

  After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

  Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

  Does anyone have ideas, what I could do to make it work again?

  Thank you

  Christian

  Hello

  Remove the battery and unplug the AC adapter from the laptop.
  Wait a little (1 hour) and then reconnect the two parts.
  Then try turning on the laptop computer. Maybe it helps

  If this will not help, then a hardware problem might be possible
  In this case the RAM modules must be verified in the first step.

  See you soon

• Local drive: totally empty D?

  Hey!

  I have a HP Compaq laptop. I use this laptop for 4 years. I have 4 local drives.
  (1) local disk: C
  (2) local disk: D
  (3) new Volume: E
  Presario_RP:F 4)
  So, today, I open my computer, and I see that my Local drive: D is empty. He had all my files into it. But now it is empty. When I click it, he asks me if I want to format. I click on Cancel. When I right click on it, the computer does not respond. Then after a while, it does. When I saw his properties, he said that the used space and free space are 0 bytes in size. Since then, my computer is very slow. Sometimes it gets stuck.
  So, I want to know how to recover all my files and how to speed up my computer. Help, please. Thanks in advance. Here is my card:
  Windows Edition
  Windows Vista Home Basic SP 2
  System
  Manufacturer: Hewlett-Packard
  Model: PC laptop Presario V6500
  Processor: AMD Turion 64 X 2 Mobile Technology TL-58 1.90 GHz
  Memory: 894 MB
  System type: 32-bit type

  Hello

  With machines HP partition D: is normally the recovery Partition to put your computer to the factory settings; do not store your data on.

  This link is not for you to work with, but to show you what D: is for.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01508532&LC=en&cc=us&DLC=en

  See you soon.

• I hide the status bar, but sometimes it happen and become totally empty.

  [Blog link removed by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  I guess you mean the module bar (view > toolbars > toolbar add-on).

  If you have extensions put data (information) on the module Firefox poster bar then this bar if the content of this bar is updated.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Need help to save the files/folders to a backup disc to record on a newly installed hard drive, which is totally empty.

  Last year I had everything (files, documents, photos, etc.) in my computer saved on a CD. My computer crashed last week and held our Geek Squad 'doctor '. The hard drive has been replaced, and I need to transfer or copy from the backup drive saved on my computer recently recommended. Can you please explain how to copy all my files/folders on my computer? Help!

  Last year I had everything (files, documents, photos, etc.) in my computer saved on a CD. My computer crashed last week and held our Geek Squad 'doctor '. The hard drive has been replaced, and I need to transfer or copy from the backup drive saved on my computer recently recommended. Can you please explain how to copy all my files/folders on my computer? Help!

  ================================================
  You were previously running Windows XP?

  You're still using Windows XP?

  How was created the backup CD?

  If you insert the CD in your CD drive and go to...
  Start / Workstation... and right click on the drive
  Letter it displays the directory for this drive...
  the CD? If_Yes_ what are the files names which
  you do not see?

  If it was just a simple data CD... you can copy.
  Paste the files in a folder on your hard drive.

• Total general down is empty

  Hello
  
  I'm on Discoverer more than 10g, do not have administrator rights, since I use it as outsourcing and have the following problem:
  
  In the area of the crosstab data points, I use the function NVL (COUNT_DISTINCT (x), 0) and I need to have a grand total of it down, but it's empty, saying that nested aggregate functions are not allowed.
  
  For example, it looks like this:
  
  DEPARTMENT | NUMBER OF EMPLOYEES
  -----------------------------------------------------------------------------------------
  R & D | 10
  FINANCE | 5
  HUMAN RESOURCES | 6
  ------------------------------------------------------------------------------------------
  TOTAL | -empty-
  
  
  Any help?

  Hello

  You can try to use the calculation COUNT_DISTINCT (NVL (x, 0)). How is x defined? What is a calculation?

  Rod West

• total general on table with variance

  ! http://img17.imageshack.us/img17/4070/resulta.jpg!
  
  Hi, I set the formula for the variance column to: ("current value" - "last value) /"Last value"* 100
  
  When I activated the 'total' of the table, it gives the total variance general = 0%.
  
  but in fact it should be 3.3%
  
  How to reach my goal.
  
  Thank you very much!

  ("Current value" - "last value) /"Last value"* 100.00

  Change "100" to "100.00".

• Free trial on Mac produces the empty dialog box

  I downloaded a free trial of Acrobat DC specifically to export text in Word.  CD player have been run successfully after that it has been installed.  But when I go to the Acrobat tools section and open the export function it will allow me to select the export document but the dialog box that appears once I selected 'Export' is totally empty.  The same thing happens if I am in a document and select "Save as", a totally empty dialog box appears and you are unable to select a location and proceed.  Anyone have any ideas?

  One must convert the text in a pdf document to Word for important revisions on a regular basis and have desperately needed an easy to use tool that eliminates a lot of time to shaped text after have exported them.

  iMac Intel Core i5 2.5 GHz

  Word for Mac 2008

  Safari 9.0.3

  Hi nicolej78674742,

  Do it me know the point exact version of Acrobat DC & operating system installed on your Mac?

  Make sure that Acrobat DC are updated to the latest version Release Notes | Adobe Acrobat, Reader.

  To save as a problem, try the troubleshooting steps below: -.

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards
  Nicos

• reply to HTML messages are sent empty

  38.1.0 running under XP Pro, SP3. Account settings are of composition using HTML. When you reply to an HTML message, I get an error (screenshot attached) dialog box. Clicking OK results in sending a message TOTALLY EMPTY. Clicking Cancel Cancels the answer.
  I can only define account as text to avoid this problem. I want to be able to use the HTML parameter. Started 4 days ago, no system crask major or any other suspicious event in the context of the time.

  I guess that your aid avast as this error message appear after avast updates its most recent version.

  You must create an exception in Avast for the NSEmail.html file. in the temp folder.

  As a customer, you may be able to contact then and give me a link to their official solution. Because I'm sick of doing until I.

• WMP11 ' share my media to "box is empty

  Starts to go a little crazy after days of trawling through forums to resolve this - I hope someone can help.

  I installed a Sony Bravia TV with wifi connectivity - it connects to the internet via my router fine.

  I want to share media (music, photos, videos) on my home PC which is running XP (SP3) Media Centre Edition 2002 on television. The home PC is connected to the router.

  In WMP11, I turn on media sharing, but the box where I should see the icon of the Bravia is totally empty. It doesn't even show "of other users of this computer.

  I use the Windows Firewall and the trend (without firewall) titanium - these two turn off doesn't make any difference.

  My wife's cell phone is running VISTA and has a router on the same wifi connectivity. If I go in WMP11 on his computer and turn on media sharing, the icon of the Bravia is there and sharing on TV works fine (except most of the media I want to share is not on his machine...) Sharing on his machine in WMP11 box also shows an icon for "other users of this computer. In 'Network', the Bravia also appears in the visible list of devices, as well as the PC at home.

  On the XP PC, my network places does not show the Bravia - it shows VISTA laptop for my wife.

  What to change on the XP machine to see the Bravia TV?

  I know this question has been asked a lot, mainly by PS3 users, but nothing I read or tried has solved this problem for an invisible TV.

  Thank you.

  Peter

  Seems that the firmware must come through the ISP, because it is in their cable network interface. Will follow with them and see.

  Thanks for working with me on this.

  See you soon,.

  Peter

• The Windows 7 Installer refuses to install on an empty formatted partition

  I have two partitions.

  C: (149,04 GB) contains a professional Windows 7 workgroup

  In management records shows this partition "healthy (Boot, Page file for crash dump, Primary Partition)"

  D: (149,04 GB) is totally empty, newly formatted

  In Disk Management displays this partition "healthy (System, active, primary Partition).

  Have tried three times to install a different version of Windows 7 on D: but installation is refused with Setup stating that he cannot find a partition and then install cannot continue.

  Should what steps I consider with D: for her to accept a Windows installation?

  One thing that concerns me regarding any thing with D: is the possibility to get the dreaded "BOOTMGR is missing" when I restart the computer.

  I made a mistake making D: partition Active?  If this is the case, how to cancel it?

  Thanks in advance for your help.

  Thanks for the answers, people.  I solved the problem by buying a new computer in the last 24 hours.

  Now hoping to unload my HP Pavilion slimline with a Windows 7 Pro workgroup but VERY picky DVD player vertical for £50 or more for all those who wish to collect London NW10.

• C4D file lite - empty after the new update?

  I installed the latest Aftereffect and C4D Lite, and then - when I try to open my file lite previous C4D - its totally empty and all my layers in the C4D file went.

  I can only view my file in After effects, but cannot make changes in C4D, because its empty? () 0

  Number of hours of work have disappeared - or maybe its me doing something wrong.

  Thomas

  Denmark

  I don't remember correctly. The version is R16, but rendering is R17, which is what I thought of.

  Nevertheless, the question is maybe because you have opened the wrong file. In your AE comp, I see HUS_NY.c4d a lot, but the screenshot of C4D is Murstensvilla.c4d

• CC desktop application empty

  Hello, I want to update to lightroom and photoshop but my desktop CC app is totally empty when I run it. My adobe Id is correct and an internet connection too. In addition, I am connected to adobe when I lauch CC Office. Thanks a lot for your help

  White screen

  https://forums.Adobe.com/thread/1249756

  Sign-in black screen | Creative cloud desktop application

  https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html

  https://forums.Adobe.com/thread/1970202

• Unable to do the Grand Total in a Pivot table view in OBIEE 11 g

  Hello Experts,
  
  I'm quite new to OBIEE 11 g
  
  I've created a report and wanted wise ranks. Total single general to OBIEE 11.1.1.5 version. While the sum "After". I get an internet Explorer window pop up saying the following.
  
  
  "Are you sure you want to nevigate leave this page?
  
  The changes u made on this item has not been saved. Click Cancel to return to the editor, where you can save the object.
  
  Press OK to continue or Cancel to return to the page.
  
  
  I tried the two option, but no options work.
  
  Please give me a solution on priority because the customer is on the head.
  
  Thanks in advance.
  
  Niraj

  Hello

  Yes.Best how to do it outside of the browser. close this thread-mark and mark as answred above my answer.

  Thank you

  Deva

• Grand total/RowCounts

  Hi all
  I have a problem while cash/totals in the responses. I use 15 columns in a tabular report. Off these two are columns of dollar giving me correct totals. But there are some date columns which gives some dates in the line Total wiered general.
  That you have control, so that we can create only total in columns specific rather OBIEE doing alone.
  
  Please help on this, can we set any configuration to manage?
  
  Thank you
  Vijay

  On the criteria tab, click the column and change the formula. Where it says 'Aggregation rule (total line)' set it to None.

  If it helps, please close thread and give points according to the rules of the forum.

  Paul