Total of page: display mode. Using If statements on page totals.

Similar Questions

• iMac darkens when in display mode using target (TDM) and the lack of brightness slider!

  Hi all

  I use a MacBook Pro (13 "to end 2011) and iMac (27", by the end of 2012). Both are up to date, running El Capitan 10.11.5. They are connected with a thunderbolt cable in order to use the iMac as a second screen (TDM).

  Now, when I press CMD + F2 to the iMac, iMac gets used as second screen as expected, but it goes really dark! He's not black, you can still see the desktop but on a sunny day, it's really hard to see anything. Now, it's pretty embarrassing, but the second part of the question makes it a pain in the *. When the iMac is dark, I always go to the system preferences and open the settings for the display. I can see a window with the parameters for the iMac, but there is no cursor for the brightness! There is no way to make it brighter!

  The only solution is to disable the target (CMD + F2) just display mode to enable it again after a few seconds. Sometimes I have to activate the TDM twice but sometimes it takes 4 or 5 loops toggle just to see the brightness slider!

  Here is a screenshot of the settings without the cursor window

  

  And that's what it looks like after a few loops, and then I can adjust the brightness.

  

  Any ideas why this happens? Any advice on a possible solution? Why - what is darkening the iMac? Why is the cursor missing?

  Best,

  Stephan

  There are other topics on this issue, like the one below. One of the workarounds suggested is to use shades free app: http://www.charcoaldesign.co.uk/shades

  Unable to control the brightness in target display mode

• My page display mode live view, but not in design mode.

  In DW CC 2014 and 2015 CC DW, my page display mode live view, but not in design mode. When I switch to Design view, I see only the grid and nothing else. ????

  DW, especially the latest version, requires a clean code and valid for many functions to work correctly. Chances are, there are a few code errors in your HTML view Design of the data warehouse can not handle, but browsers and the Live View can.

  Run the validator at http://validator.w3.org/nu for a list of errors and correct all found your page.

  If you have a clean and valid code, but the problem persists, post a link to your current page, or all of the code and css here in the forum (don't use e-mail, it will not come through) so we can take a look at what's going on.

• Can I use an iMac 27 "mid-2011 in target Display Mode broken graphics card?

  I inherited the iMac, and rather than buying a new graphics card, want to use it as a second monitor on my MacBook Pro, with thunderbolt. I tried to connect the iMac and MBP with a thunderbolt cable, but F2 command is not turn on/off the iMac in display mode. I'm doing something wrong?

  I think that you need the graphics card to be able to use the TDM. You must also use a good video cable Thunderbolt such as those used with your other view.

• In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

  My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

  I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

  The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

  I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

  Unfortunately, a little more research would have responded and answered my question.

  Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

• Thunderbolt target Display Mode does not (El Capitan)

  Hello

  I have two iMacs (iMac (21.5 - inch, mi 2011) and (iMac (27 - inch, mid 2011).)) I used sight to connect display mode target without problem with a MF639ZM (cable Apple black Thunderbolt, 2 M).

  I updated both the iMac OS X El Capitan, version 10.11.5 and... surprise! they connect more.

  I already stay the PRAM and SMC several times in the two iMacs. The update of the APP Store purging any discount, I already installed all they.

  In my iMac 21.5 "information from the system has a 25.1 Firmware, Firmware Version 2.1.3 the Thunderbolt Bus microphone Port. State no device connected.

  In my iMac 27 "information system has a 22.1 Firmware, Micro Firmware 2.1.3 the Thunderbolt Bus Port. State no device connected.

  If I connect the Thunderbolt cable the status of the link in the information system change Link Status 0 x 7 to Link Status 0 x 1/0 x 2 both of the iMac.

  If I unplug the Thunderbolt the status of the connection cable in the system information changes in Link Status 0 x 7 in two of the iMac.

  In the Console, if I connect or disconnect the cable Thunderbolt I can see:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 2 unplug = 1

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 2 unplug = 0

  Thus, it resembles the iMac Thunderbolt ports not work and detect the connection of the cable.

  But... Command + F2 is not target display mode!  (Use all F1, F2. etc. keys as standard function key... is disable under keyboard).

  I'd appreciate any help or support to solve this nightmare.

  Best regards.

  Looks like you've covered all the bases except try a new cable Thunderbolt.

  Use your iMac as a display with the target - Apple Support Display Mode

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Target display mode has suddenly stopped working

  I've been using display mode target using a cable thunderbolt between my iMac 21.5 inches (end of 2012) and Macbook Air 13 inch (early 2014) for about six months.

  I had a few weeks off and had to return to find that I can enter is no longer target display mode! When I press Control-F2 on my keyboard connected to my iMac, that nothing is happening. I also tried Fn-control-F2. I tried different ports in case one of them is damaged. But nothing helped.

  Anyone has any suggestions as to why target display mode would have stopped working so suddenly? I really like the feature of double screens between my macbook and iMac and would really like to come back!

  Thank you.

  I know target Display Mode will work, but only if I use the command-f2 from the login screen. After the connection, the command does not work. have you tried?

• Satellite P870: Game that the Hunter does launch - no proper display mode

  Hello

  I have a Satellite P870 I just upgraded to 8.1 of Windows and a game I play called theHunter launch now.

  When I run the launcher it comes up with an error saying "No. appropriate display Modes.
  It worked fine on Windows 8.

  TheHunter support has not been very useful and well try a number of different things, I can't seem to solve this problem. I have also contacted Microsoft but got a call in as soon as they have been busy!

  Any suggestions as to what could cause this problem and how to solve?
  Thank you.

  I don t play this game and cannot say what may be the problem. To be honest, this message is not unclear to me. I use Win8.1 too, but so far I n t see on my laptop.

  Try asking this Question on hunter forum http://forum.thehunter.com/index.php
  Maybe someone will be able to help you.

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Connect the Middle 2010 21.5 "iMac for mid 2011 21.5" iMac in target display mode

  Hello

  I looked for an answer to my question and I'm not 100% clear, so I ask your help please.

  I have an iMac 21.5 "2010 middle which I want to connect to an iMac 21.5" 2011 mid (which I think the purchase) in order to have two screens. I know it can be done with these two models but the iMac 2010 has a Mini Displayport connector and the 2011 has a Thunderbolt connection, so I don't know if it's possible. I don't mind which screen is the main.

  Any help is appreciated

  Thank you

  In fact, it can be done from the mid 2010 21.5 "iMac doesn't have a Thunderbolt port. See the information in use your iMac as a display with the target - Apple Support Display Mode

• IMAQ video on the display mode - resolution wide screen

  I try to print the image of an EVS-1463RT to a monitor. The video IMAQ RT Out VI works as expected, however the counterparty IMAQ Out video display Mode VI uses a resolution of display listed, of which there are only 6 possibilities of 640 x 480 to 1920 x 1440. I want to say a resolution that fits my screen. Is it possible to do?

  Thank you.

  Sorry, that the mechanism to display current image on the virtual server Exchange is based on the VESA standard that doesn't support a certain set of fixed resolutions (and no widescreen variants).

  Eric

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• normal display mode

  normal display mode does not display a Clipart etc. Print preview is

  Hello irene123 _-.',

  O what program are you using to view the photos on your computer?

  O does happen with all photos or individual photos?

  Ø what exactly do mean you when you say normal display?

  What is the extension of the images you are trying to open.

  I suggest that you use the window library see photos on the computer. Right-click on the clip and open with Photo Gallery.

  However, if the pictures are not supported with the native Viewer, you might download the viewer supported using the favorite search engine.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Interactive reports: how to change the display mode (details, group by, chart, pivot) programmatically?

  Hi guys,.

  is it possible to control the display mode of the interactive reports, i.e. display icon, list, view detail, group by, chart, pivot?

  

  As I understand the current setting is stored as a preference of the user for each user... and again when his connection. A settings of the rules them all (all the stored report parameters).
  
  The display mode switchable using a javascript, the api package apex_ir or via a link?
  
  Thank you
  ~ Dietmar.
  

  Hi Dietmar,

  It is not a supported way to change the display interactive report mode.  With the device connected by Anthony internally, we will consider adding this because part of apex_ir or a link to the future.

  Kind regards

  Christina