Touch screen is broken, y at - it a keyboard shortcut to tell the phone to act as a USB device

Similar Questions

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Locking of the blackBerry Smartphone screen/keyboard keeps activating while the phone is in use.

  I have a Blackberry 9810 "BOLD" and the screen/keyboard lock feature is always activate itself, even when I'm in the middle to send him a text or using the phone. Yesterday, it happened while I was talking on the phone and he cut the call. I can't find an option on my phone to activate switch. How can I solve this problem, because it's practically what makes my phone useless.

  Hello

  Well, first of all... No... no 'BB support' can answer you here. This is because, when they gave to you when you register on this site, this site has nothing to do with any formal support any. On the contrary, it is a community of users where volunteers try to troubleshoot other kind souls to the best of their ability. Unfortunately, no response would mean that anyone who took the time to read your post has something useful to you.

  From what you describe, I would infer that there is a wrong application behave which interferes with the function of locking, or maybe your operating system is somehow corrupted, or maybe a combination of the two. What I recommend is the following:

  1. Reload your own OS and as "skeleton" as possible (for example, whatever it is optional, let power off)
  2. If the problem immediately presented, then repeat step 1, but with an OS different package... maybe there's a bug in the specific operating system you run.
  3. If the problem does not immediately, then run for maybe a week-long enough to be sure that the behavior will not occur.
  4. If the behavior does not after a week, add just one thing (just one... no matter how tempting it is to add more!)
  5. Repeat steps 3 and 4 until the behavior is, how well do you know the culprit
  6. If the behavior does not, then you know that reloading the OS or switch to another operating system package was the cure.

  If none of this he healed, then you will have a physical hardware problem for which assessment in the hand by a qualified material is of course necessary. If you are under warranty, you seeking your warranty provider - normally your place of origin of the purchase, your provider of mobile service or one authorized service center (it varies by location, but you should have received the documentation at the front that tells you exactly how to use your warranty).

  Good luck!

• hard reset my treo, stuck b/c touch screen is broken!

  Hard reset my device forget that to get it going again, I had to go through the stage 'Please touch the screen with your stylus' things.

  Screen on my device has long been dysfunctional, I was doing around the use of scrolling.

  Is it possible to use the buttons to go beyond this screen, so I can use my phone as before?

  Any suggestion would be appreciated!

  Thank you!

  Seem to have it fixed, yay!

  Did a 'hot' reset and it happens again.
  Now the sync to put all my data back to this topic.

  Greatly relieved!

• Windows 8, using the touch; screen is growing on its own, been using ctrl 0, but the real pain

  I adjusted the custom on the zoom to 100; I can return to 199 by ctrl0; but something interferes with the size of my script, and even on the e-mail; It expands also to photos on Web sites & email.  I'm fed up with this whole notebook, tricks of windows 8.  Can anyone help?  Oh, she even exchange custom when she grows.

  Thank you for your help.  Sandra

  Hi, Sandra

  Please find the ink below might help you.

  Use and troubleshooting of the TouchPad and ClickPad (Windows 8)

• I have updated to iOS to 9.3.1 now my screen is in portrait mode and will not change landscape when the phone is turned. Also, it just goes straight to voicemail without ringing on my end when people call. All I can say all the settings are correct. ideas

  Looks like my question may have been corrupted.

  I updated my phone to iOS 9.3.1 last night. Now all my incoming calls go directly to Voicemsil without ringing on my end. My sound and message settings appear normal for me. Also, my screen rotates out of sight from portrait to landscape view for photos FB etc...

  suggestions to solve problems?

  It seems that if you have the lock of portrait and do not disturb activated. Swipe up from the bottom of the screen to call the control center. Look at the two circular icons on the top right row. They are white? If so, tap on them to turn them off. One resembles a Crescent Moon, the other as an arrow in a circle with a padlock in the Center.

• Keyboard shortcut to exit the full screen? (no, not alt-ctrl)

  I'm using VMWare workstation on a laptop. The host is Windows 7 x 64, the guest is Ubuntu 10.10.

  The laptop, when I'm at work, hangs in a display of 1200 x 1600 portrait as second screen and 1280 x 800 display integrated as the main screen. In general, I'll put the instance of Ubuntu on the second screen and click full screen in the toolbar.

  When I SLEEP the laptop and disconnect the screen and then later to wake the portable computer, the prompt returns with a wide black border around it. This means that the display he uses is largely out of the limits of the office - but much of the top left of the screen is still visible.

  I think that, if I could leave the guest full screen (say, back to the window mode) and enter again full-screen, it would actually take charge main screen and resize to 1280 x 800. However, I can't figure out how actually the VMWare instance exit believe that it is in full screen mode. Normally, I get a drop-down menu to control this (minimize and UN-fullscreen window control widgets) when I move the cursor to the top of the screen, but this menu does not appear at the top of the screen as indicated in the comments (which then has a wide black border), or top of the physical screen.

  Is there a command line tool Linux, or a combination of secret keys or something to use on the host computer, what can come out of the instance of VMWare what she believes is in full screen mode? Some WM_WHATEVER message I can send to it? Another option?

  Hello

  Don't know if you have tried this: CTRL + ALT + ENTER - this should you return to windowed mode.

  Kind regards

  Glen

• What is the keyboard shortcut to rotate the screen?

  What is the shortcut to run?  I think I must have accidentally hit these keys.  I hope that there is a.  It is very difficult to reorganize the menu drop down and select rotation because the movement of the mouse is difficult.

  In addition, Ctrl + Alt + left or right arrow keys it rotates 90 degrees.

• Satellite U920T - touch screen does not

  The touch screen on my U920T satellite does not work from a few days back.
  I can't find all the settings for touch or any (except the touchpad) touchscreen device in Device Manager.

  I'm not sure exaclty when he started to malfunction.
  I installed the 8.1 Windows a few months ago and had a problem with the card wireless at the beginning, but the problem with the touch screen just appeard this week.

  What driver Toshiba control the touch screen?
  Is it a hardware problem or software?

  Hello

  To be honest there is no special driver to control the touch screen.
  The driver is provided by the Windows System.

  I think you should get the laptop back to factory settings but I fear that this will not solve the problem of Mr. smells like a hardware problem because I found some threads here in this forum about the dysfunction of the touch screen and especially the problem could be solved by service agents.

  By the way: before you run the recovery process try to configure the stylus and touch screen.
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• Satellite S50t-B touch screen no longer works

  Hello

  My partner bought a S50t-B Satellite probably 5-6 months and everything worked perfectly, until she had a few updates to windows that has happened, and now the touch HID compatible drivers are apparently disabled in Device Manager?

  The touch screen no longer works, and I've pretty much exhausted all the options I could think.

  I tried to reinstall windows, apply all updates via the service center, I can't find the drivers for the touch screen on the support Web site downloads section and the bios etc is all to date.

  I was hoping someone could shed some light on how to proceed with this issue, since the main reason, she bought there the touch screen function.

  Thanks, Keegan

  Post edited by: keegz

  I don't have any idea what system you have installed, but if the laptop was equipped with touch screen, additional drivers for touchscreen are not necessary.
  If touch screen is working properly, the Windows (Win 8.1) should detect it automatically.

  What Satellite S50t-B-ooo do you excatly?
  From my point of few, the laptop must be set to settings factory just to check if its really a software related issue... so I wonder why you do not use HARD drive recovery or recovery media to restore the laptop to factory settings?

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

• How to disable the Portege M700 touch screen?

  I have a Portege M700 tablet.
  I would like to disable the installation of the touch screen on it (but not writing or drawing ability activated by the stylus).

  Is this possible?

  My friend has a M700 and it has disabled the touch screen feature, so it is possible.

  I don't know exactly how do it, check the user manual, or go to the control panel and watch in the utility of the tablet.

• HP SlateBook 10-h001er x 2: touch screen

  Hello! I broke my screen of the touch pad. I want to replace the new touchscreen. The number on my tablet - 5360N REV of FPC loop - 1: 3 and the new touch screen has a marking on the loop - K194V-0. Can I replace it? Suitable if the new touch screen to my loop?

  Hi there @Ljot1412,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for how to replace the screen on your tablet. I'm happy to help you with this.

  Looking through Service and Maintenance HP SlateBook 10 x 2 PC Guide , you will find on page 13 of 58 the following:

  (1) display panel (10.1 inches, AG, UWVA, touch screen WLED) 728152-001

  So the part number for the Panel itself is 728152-001.

  You have a few options, you can either call support for repair or check the HP parts store if you prefer to do it yourself. Telephone support, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.