touch screen seems miscalibrated

Similar Questions

• Menu popup blackBerry Smartphones No touch screen

  This use to work properly, so I have no idea of what I did.  I use to be able to hold my finger on the screen and get the pop-up menu, now nothing.  It still works if I hold the trackpad, but nothing when I hold my finger on the screen.

  All the other features touch screen seem to work well.

  I appreciate any help/suggestions.

  Thank you!

  I have no problem with it on my end.  If it used to work, he'll probably be corrected with a battery pull.

  With your phone, remove the battery, then replace a minute later.

  Let us know if that does the trick.

• touch screen not responding do not in the iOS 10

  Hi all

  I use 6 and recently upgraded iPhone upgraded to iOS 10.

  I started having some strange behavior on my iPhone the day where I put on level to iOS 10.

  My iPhone touch screen is not responding properly. Sometimes I need to wait a minute for a touch of answer, and sometimes it does not. Sometimes, I need to extinguish it with force my phone.

  I never had a single problem with my iPhone 6 before and I think that it happened only after I upgraded to iOS 10.

  I tried to reset the phone and also the factory reset but no improvement.

  Any solution please.

  Thank you.

  Ratna

  Hello

  I'm having the same problem. The 'funny', it's that I have used the last two betas public iOs 10 and did not notice the problem, it seems to have started with the 10.0.1 release official. I tried version 10.1 beta, but the problem persists. Yesterday I went back to iOs 9.3.5, and the problem did not go so far.

  Best,

  Stefan

• Touch screen on the iPhone issues 5 after SW upgrade 9.3.2

  Hello

  I have an iPhone 5 that I bought just two years ago. The phone worked perfectly despite the fully loaded with applications, images and music. About two weeks ago, I upgraded the software to 9.3.2. Just after that, the touch screen started to work intermittently. When I managed to unlock, it will take seconds of use of the phone before that the touch screen no longer works again. I have to press the button several times until the touch screen comes back to life (only for a short period of time). It's totally unbearable. I can't yet answer phone
  calls.

  I contacted the technical support and all they got me to trying: restart the phone, restore it via iTunes for a backup, give it a new phone... and the problem is always the same. I've updated then 9.3.3 and same thing. I was informed by the technical support that this could be due to a problem with my hardware only made visible by a heavier operating system. Well, it's just not possible. It is not possible that my phone with applications 0 is unable to deal just with the operating system while running smoothly with the phone completely full before the upgrade.

  Someone faced the same question? If so, did you solve it? Thank you

  He Jeinser,

  Thanks for checking out the communities Support from Apple! I understand that you are having problems with the response of the touch screen on your iPhone. I can understand who want to ensure that you are able to use your iPhone, the way that you expect.

  You have already completed all the steps that I would normally recommend to solve a problem with your touchscreen, including restoring the iPhone and set up as a new device. From the information provided, it seems that your iPhone needs to be repaired. The following link should help you get started with the process and has links with additional information on topics such as the warranty and pricing of the service, replacing the battery and express alternative service.

  Repair - iPhone official Apple Support

  See you soon!

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Satellite U920T-117 - touch screen does not work & off restarts

  Just opened my new u920t-117, my first time buying a Toshiba, 5 mins in and excitement began to turn to you to worry.

  I really hope that its makes me something simple, bad, or at worst a software problem.

  At no time the touch function works (either in tablet mode or laptop).
  In the--> system under Pen & Touch Panel it says "no net or touch entry is available for this view ' as my last computer that had no touch screen.

  This means - there is a problem with the driver, or something.

  It also appears when I click on stop down it stops down and 5 seconds later starts again.

  Hi stephen

  > I really hope that its hurts me something simple, or at worst a software issue.

  I'm afraid the worst cases are a hardware malfunction, and I guess that your contact U920T Satellite malfunctions of the screen.

  I read in another thread about the similar problem, and it seems that service engineers must be contacted in order to solve these problems of touchscreen.

  I don't know if you could ask your dealer for a replacement unit but in the case where the dealer replace the laptop, get in touch with a Toshiba ASP your country to fix.

• Portege A200 - calibration touch screen

  Hello
  I tried to get a touch screen of 8 "with my 200A. There is no problem with the see etc. The problem I have is that when the system is switched between the laptop and the monitor, touch screen resets the graphics settings for laptop (1024 x 768).
  I'm turning the screen touchscreen at 800 x 600 and laptop to 1024 x 768. How set system so it will remember the settings?
  TIA
  Wayne

  Hello

  The European driver Toshiba page provides protected A200 drivers, they are placed in the archives.

  I checked this and found a posting for external monitor Service.
  I recommend that you install this.
  In addition, the laptop seems to use the internal graphics chip 852GM. It s from Intel.
  Then maybe you need to update the display driver too.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• Windows 8 will work as a touch screen on my computer to windows 7 touch screen?

  I tried to find an answer for "windows 8 will work as a touch screen on my windows 7 HP touchscreen computer.

  It seems to have worked on this HP Touchsreen PC

• A Satellite U500/018 Touch screen or not?

  I'm tkinking to buy a U500/018. Toshiba web site says "The Satellite U500 is a new approach with touch control"
  I saw one in a store and told me it's not not touch.
  Toshiba website says it's.
  So is he or she not touch screen. If so how is it activated?
  The one I saw in a touchscreen shopU500/018 did not work or was not enabled

  Hey,.

  I found the exact specs on Toshiba Australian page:
  http://www.MyToshiba.com.au/products/notebooks/satellite/U500/psu9ma-018013

  On the screen, I found the following information:
  + TruBrite® WXGA (1280 x 800) widescreen 13.3 +.

  It seems that he doesn t a touchscreen. Therefore, you should choose another U500 model.

• HP PHOTOSMART D 7268, TOUCH SCREEN DOES NOT

  P/N CC975B, TO THE END I WEEK NOTOCING TOUCH SCREEN IS NOT WORKING, SO NO ORDER FOR PRINTING CANNOT BE GIVEN. DOES SHE WANT REPLACEMENT TOUCH SCREEN?

  [number removed for privacy]

  Hi d 1357,

  I recommend you contact support, it may seem as if it was a hardware problem.

• IOS 9.2.1 broke the accuracy of the touch screen

  After my upgrade to 9.2.1 the precision of touch screen makes the phone almost useless.  I can not type accurately and cannot even open the applications I want without having to open other applications.

  When I lock the screen and then unlock it seems to fix the precision of touch screen for about 10 seconds, then it will return the incorrect touch screen.

  Another question, I noticed is 2 white vertical lines that appear in the home screen randomly, but when I lock screen is not there... so I'm glad this isn't HW issue.

  This started last night after being upgraded to IOS 9.2.1

  someone at - it solutions on it?

  Reset. Restoration. Restore as new.

  Those who characterize the troubleshooting steps. I have no problem with the precision of touch screen, nor anyone I know.

  Your description of the "white lines", would seem to indicate corruption of iOS, in which case a restore should fix the problem, or a display failed.

• OfficeJet Pro 8500 a A910a - cannot save pdf in multiple files via touch screen

  Hello world
  
  My problem is that I can't save my scans in multiple files (.pdf) If you use the "scan to file function" via the touch screen on my Officejet Pro 8500 A910a a shortcut. It works when scaning manually from the computer, but I need to work from the printer/scanner.
  
  The only way that the scan shortcut saves each page separately (works the way I need) is when you save as a .jpg file, but this isn't the exit, I need. I search for an .xml file change the shortcuts manually, but have not found one. Since my other printer 8500 A909a can analyze each page in a single .pdf file, it must be a question of settings that the A910a does not offer this parameter directly.
  
  I appreciate any assistance with this problem.

  OS: Windows 7 Home Premium 64-bit

  Driver: OJ8500_A910_1315

  Firmware: OJP8500_A910a_1231A

  Hi RnRMusicMan,
  
  the solution you are suggesting is what I have now and the reason why I even started this thread. Analysis each page separately from the touch screen is a pain in the a * and analysis of PC via a scan profile is not the way to go for me either. Thank you in any case, it seems like it is actually a problem in the software and I have to be careful next time, choose a new printer.

  RnRMusicMan wrote:
  

  Hi Koumack,

  Welcome to the HP Forums!

  I see that you are trying to save your scans in multiple files (.pdf) using the analysis of the function of file.

  That's what I could find in my resources:

  How to perform a scan: from the control panel

  Breast of HP Scan, select scan on a daily basis, and then click Advanced settings, select the file tab and check create a separate file for each scanned page. Click OK. It should work from the software.

  

  Otherwise, even if it may be a longer process, as a work around the printer, you can scan a page using the scanner glass.

  Hope this helps and have a nice day.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.