Similar Questions

• updated my ipod nano now nano touch screen unresponsive

  updated my ipod nano now nano touch screen unresponsive

  First, do a Reset (reboot) If you do not already

  Learn how to reset your iPod - Apple Support

  If this does not help, if you did an Update to the iPod software, try to do a restore.  This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  An Update is applied to existing software, without making a deletion first.

• 310 - 1260uk: touch screen unresponsive

  My screen unresponsive touch.  Impossible to get soft keyboard etc etc.

  I cleaned the screen - no difference.

  Hello @johnaneal,

  You can return to Windows 8 by using two ways. The simplest uses the HP Support document: use Microsoft System Restore (Windows 8) to restore your computer to a point in time where you had Windows 8 is installed. 8.1 being just an update this will reverse it.

  However, if you have not one point restoration allowing you to go back too far, you will need to back up and recover your computer to factory settings. To save your personal information and ensure it is not lost, I would like you to look at and follow the steps in the HP Support document: backup of files (Windows 8), who will be your personal files are up to date.

  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.

  Then, I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 8) system, which will allow you through to get your computer back to factory settings.

  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.

  If the steps above did not resolve your problem please contact our technical service at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I want to thank you for display on the HP Forums. Have a great day!

• Sensor of fingerprint identification does not work and the touch screen unresponsive

  iPhone 5 s 32 GB Stopped working sensor of fingerprint identity with the touch screen not responding

  latest version of iOS

  Flickering of screen there are some horizontal lines appear on the screen for a while in very minor rainbow color

  went to the apple support no help in troubleshooting. They asked me to request a replacement pay for 22K INR.

  I think that it is not worth getting a replacement of the delivered phone to new/old version as new series is available in the market, paying a large amount.

  I would like to hear your valuable contributions.

• Xperia Z3 Compact - touch screen unresponsive

  My Z3 Compact went completely insensitive to touch controls.

  I have read other messages and followed the instructions for PC Companion-implementation to date - repair, but without any change.

  Since the touchscreen is insensitive it is not possible to boot in safe mode. The only operational functions are cable power switch, the volume buttons and the camera. All that requires the operation of the screen is impossible, and I'm now trapped in the "language selection" page, unable to make orders.

  The phone was working perfectly and then without being abandoned or badly treated in anyway simply stopped working.

  It seems the only option now is to return the phone for repair or replacement, is - that correct?

  Hello

  If you have tried a repair of software without change, I recommend that you get your phone reviewed by a technician at your nearest authorized service center. I suggest you contact your Local support for more information on how to proceed with this.

• Q10 Q10 blackBerry touch screen unresponsive

  Since this morning my touchscreen unresponsive Q10, I made a BBLINK with cleaning but the screen is still not responding does not break without scratches, works for keyboard

  MKDF wrote:

  «.. . When I press the power button to restart it shows me but I can't press the screen... »

  Yes, I did not stop to think about it. I'm sorry.

  Go ahead and make a traction battery. Remove the battery while your phone is on, then replace it a few seconds later. If your screen is still unresponsive, you may be better to report it to your carrier for warranty work. I have some other suggestions, but they require you to have access to your screen.

  I hope that helps you.

• Admiral freeze / lag when Dial/redial - touch screen unresponsive

  Hello

  My Admiral freeze / lag when Dial/redial and the touchscreen is unresponsive. Its really bad on missed calls. I can hit the Green Dial icon 20 times in a row, and nothing happens. Finally, wait about 30 to 60 seconds, and he composed.

  Anyone else having this problem.

  FYI...

  I reboot systematically. Many applications runs do not. Latest firmware.

  I also noticed that the browser is slow for the rendering of Web pages no matter what connection speed is.

• BlackBerry Smartphones touch screen unresponsive

  All of a sudden my touchscreen went does not today... Yes, it was in my pocket while I was teaching, and when I took it out at the end of the course to schedule an appointment with a student I couldn't access unless I used the scroll button. Please help me solve the problem. Thanks Pollyannadogooder

  fixed my own problem by doing a battery pull...

• HP Envy 120: Touch screen does not show. Buttons on the front are unresponsive.

  The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.

  If it is not under warranty take it. Buy something else.

• CLJ CM6040f MFP: Trainer replaced, display now turns on but the touch screen is unresponsive

  Original malfunction has been sounding like turn, but not display. Replaced the trainer, now displlay is on, but does not respond to the inputs of the touch screen. What is the sequence of corrective to fix a malfunction?

  Try this:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559852&sp4ts.Oid=3356526

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• My screen text flashes no buttons work and touch screen has no answer. Never seen that before?

  The screen of my text is STUCK in flicker. No buttons or touch screen responds so iPhone 6 more does not stop. Just continues flickering. If anyone has experienced this before? Thoughts?

  Hello johnnyappleseed59,

  Thank you for using communities of Apple Support.

  I understand that your iPhone screen is stuck and flickering and the touchscreen is unresponsive. I rely on my iPhone every day, so I know how much it is important that we get this problem is solved. I have a couple of things I want you to try.

  First, use restart your iPhone, iPad or iPod touch and try to force restart your iPhone, in particular, this section:

  How to force reboot

  You must force restart your iPhone, iPad or iPod touch as a last resort, and that if it does not. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  

  After that, I would closely monitor the situation and see if you continue to get the same flicker on your screen.

  I would also recommend trying to make a current backup of important data from your iPhone. This article will help you:

  The backup of your iPhone, iPad and iPod touch

  Best regards.

• Hello, my iPhone 6 more was having a screen unresponsive and glitchy intermittent. Ive reset it several times and it is always that I don't know what to do

  Hello, my iPhone Plus 6 has been intermittent, unresponsing and glitchin. What I mean by that is sometimes the phone will work perfectly as his guess, but eventually Pépin and become insensitive as the touchscreen doesn't work at all. The glitch usually comes hand in hand, sometimes it's not, but the problem is a bit like a time see through the layer that come from the very top of the screen; Sometimes the layer will be a single line at the top or they will appear on the top to about 1/4 of the screen and disappear and do it repeatedly. The only way that I can't seem to get the touchscreen to work and the glitching stop is either by sliding my finger quickly over the phone and or press several times the button on the lock screen. I reset the phone several times including factory and it continued to do so. I even turn off turn turn it on and press the lower screen and home screen lock button to reset it and it goes back to the same thing. I don't know what to do. Thank you for taking the time to read my comment and trying to help as much as possible, hope to hear from you soon.

  If you encounter a problem with the touch screen, you can try the troubleshooting steps in this document support. If the screen of your iPhone, iPad or iPod touch does not respond to touch - Apple Support

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

• HP Envy X 2 touch screen not responding do not when waking from sleep

  About half of the time when I wake up my HP envy X 2 version sleep 128 GB touchscreen is unresponsive. The mouse pad and the keyboard usually work but screen tousch work again until it is restarted.

  I took a peek in the Device Manager, while the touch screen did not work and I don't see under User Interface devices, I have a HID I2C device that has a yellow warning sign. When I open it under device status, it says "Windows has stopped this device because it has reported problems. (Code 43) »

  Someone at - it information on how to solve this problem?

  I had already tried to upgrade the Synaptics drivers and it does not solve the problem.

  I noticed several times that when I wake the PC from sleep that Google Talk would be stuck with about 40% of the use of processer according to the Task Manager. I usually just close and re - open Google talk and he would not stuck using the processor.

  A couple of days ago I closed Google Talk and did not restart the program, during the last 2 days I didn't only once when the touch screen has been non-responsive after waking up from his sleep.

  I've said before, but I had a similar problem with the rotation sensor, after waking up from his sleep, he would be intermittenetly does not work and I could also see in Device Manager that another I2C HID device was a code 43 error. Also since the closing of google talk, I didn't freeze the rotation sensor.

  Like I said its only been a couple of days, so it can always happen, but 2 days is the longest I can remember never go without this problem.

  mfhengst, you have google talk installed on your laptop?