touchpad driver

Similar Questions

• Satellite Pro P100 - Touchpad driver for Windows 7 32 bit

  Hello

  I'm looking for a touchpad for my P100 (PSPA4E) driver that works under Windows 7 32 bit. After changing from Windows XP to Windows 7, the tochpad is no longer in effect.

  THX in advance for your help!

  Concerning

  Hello

  Generally for touchpad no additional driver is necessary. The touchpad also works without a driver touchpad as the standard Windows driver will be used.
  Driver Touchpad is more important for special functions as virtual scrolling, change the tapping settings, etc.

  You can download all the drivers of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But to look for in driver * Archives * because he old laptop s model.
  It s no driver 32-bit of Windows 7 available, but I've seen touchpad driver for Vista. It should work on Windows 7 too. :)

  Check this box!

• Value added package and touchpad driver for Linux

  I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

  Where can I find it?

  Hello!

  I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

  The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

  Good bye

• stream HP 11: touchpad driver does not

  Hello. I have reset my laptop due to problems of storage and the laptop is turned off and the whole process of resetting messed up until the bootmgr file is missing, I downloaded a file of windows on another computer * NOT ORIGINAL * and installed via USB key... Now everything was over some pilots were not available eg.wifi driver, that I had to download but when I reached the syntpatics touchpad driver or so its installed says ready to use, but I see nothing in that only some unknown device in Device Manager tried update and nothing went parameter-devies and still nothing it shows nothing there what should I do... I'm tired of using a usb mouse

  See this.

• Satellite U500 - ALPS touchpad driver for WIndows 7 64 bit

  I have a U500 - 00 X 012 (Australian model) which I've upgraded to Windows 7 64 bit. Toshiba Australia site says to use the Vista 64 bit ALPS touchpad driver. I could not any Vista driver to work with my U500.

  The driver is available from the Toshiba Europe website http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091112112139.zip

  The driver is v7.105.303.117

  Hope that someone who saves the many hours I've wasted trying to get the touchpad to work.

  Hello

  Normally most Vista drivers work under Windows. You get an error during installation and what happens exactly?

  Another question: why you n t try the driver from the European page? Normally, it should also work on your laptop.
  Check it!

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• Satellite L300-01:00 - touchpad driver for Win 7 64 bit necessary

  Hello

  I can't find the above mentioned driver for win7 64 bit.
  Touchpad had worked normally, with a Win7 driver and after a msg of error just stopped working (I can't scroll with the touchpad).

  Enyone have model L300 with 64 bit OS or know model that have the same touchpad driver for win7 64 bit on support downloads?

  Help, please...

  Hello

  Touchpad driver is not in the laptop model.
  You can choose the touchpad drivers released for other series of satellites as well.
  I can recommend the Satellite L500. There you can download the Synaptics and Alps touchpad driver. Both are released for Win 7 64 bit.

  Please note that scrolling touchpad can be changed/turned on in the control panel-> mouse-> device settings.

  I think it must be enabled.

• HP 250 G3: I can't find the touchpad driver

  Hi all!

  I recently bought a nice HP 250 G3 (code: J4R70EA). I am very sattisfied with my purchase (even if there is a dead pixel that now I've corrected). I also managed to install and find all the drivers (since it came with FreeDOS), except for the touchpad driver. The touchpad works but all useful actions are missing.

  Can you please help to find the last updated driver for my touchpad so that I can use gestures effectively?

  PS: I have a 32 bit Windows 7 OS. HP only provides 64-bit for my laptop drivers. I like to keep 32-bit.

  Thank you!

  Thanks for the reply!

  I just think that 64-bit OS are a unacessary transition. For my average use (navigation, Office suite, etc.) and since I was only 4 GB of RAM, I wouldn't benefit by using a 64 bit OS.

  64-bit OSs are not an operating system more safe and stable. Yes, I'm aware of backward compatibility, but why I want to install 64-bit software because they use more resources (both in terms of disk space and RAM) when all I need is available in 32-bit?

  Perhaps you have more than 4 GB of RAM, and maybe you're using a program like Photoshop or Auto CAD. If this is the case I certainly recognize the need for a 64 bit OS. Otherwise, for the average user, 64-bit is just a hype, a marketing tool or a buzz.

  These are just my 2 cents

  PS: I tried these driver yesterday and it didn't really install anything. I tried earlier official HP drivers and magically everything works. Thus, they are not a driver 64 bit OS only after all

• HP 250 G4: Need to Synaptics TouchPad driver for HP 250 G4 running Win 7 32 bit

  Hello

  I need a Synaptics TouchPad driver for HP 250 G4 running Win 7 32-bit. When I go on the site of HP driver and enter the product number and the serial number of my laptop all the getting is the driver for Win 7 64 bit. There is a 32-bit driver for Win 7?

  Serial No.: [personal information]

  Product no.: N1A78EA #ABU

  Thank you

  Sean

  Hello:

  The driver also supports 32-bit operating systems.

  I explored the driver file and there is a 32-bit drivers.

  Also, when you explore the driver folder, you will find this document I zipped upward and the joint below...

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.

• Synaptics Touchpad Driver problem - no driver appropriate to be installed (G580 20150)

  I downloaded the Synaptics Touchpad Driver for Windows 8.1 (32 - bit, 64 - bit) installed, but I get this error.
  

  What is Lenovo?

  Nassera salvation,

  Thanks for posting!

  Have you been able to check your touchpad settings before the upgrade if you have a touchpad Synaptics or momentum?

  According to the support download site, G580 could have Synaptics or momentum

  Elan touchpad, according to the support site doesn't have a driver yet for windows 8.1 and still works with the generic Windows 8.1 driver

  

  Concerning

  Solid Cruver

• New Lenovo Ideapad Z710 friend refuses to install the touchpad driver.

  A few weeks ago my friend bought new a laptop Lenovo Ideapad Z710 pre-installed with Win8. I "upgraded" to Windows 7 for him, as none of us can handle the new OS. Usually, I have no trouble to reinstall the drivers after installing a new OS, but for some reason that its touchpad driver does NOT install.

  I use the official driver for his computer, apparently is a synaptics driver and it says it should work completely fine with Windows 7, but when I try to run the installation, I get the error "Synaptics Device Not Found!"

  There are a few issues that I believe are related to the driver not being installed that can tell you something. When he closes the lid of the laptop and open it again, the mouse jumps over the screen constantly, and he can't use the computer until it restarts. In addition, he cannot turn his touchpad, which I suppose is a function that comes with the driver.

  Any help or contribution is greatly appreciated, if you need more information, do not hesitate to ask.

  Thanks again,
  -Tyler

  Are you sure the touchpad isn't a Synaptics touchpad ElanTech? If ElanTech, try to uninstall the currently installed driver. Then install the driver from the website. During the installation of the driver not to put a check mark in the box that says driver Synaptics install now.

• Synaptic PS/2 Port Touchpad Driver Code 80240016 error

  During Microsoft updates on August 14, 2010, I received this error on my HP Pavilion tx2510us Entertainment Notebook PC.

  Do the following and it will be resolved the problem and the error.

  (1) unstall all the devices in the Manager device/mouse and other pointing under control panel devices.

  Click Start, control panel and click Device Manager (it is easlier to locate Device Manager using the classic version)
   
  Click on the + sign next to the "mice and other pointing devices."
   
  Double-click each list item, and then choose uninstall. When prompted with "Are sure you want to remove this element", click Yes. Repeat this operation for all items.

  Once all items are deleted; Close all open windows and restart the system.
   
  (2) turn off your Antivirus Security Suite for this installation.

  (3) install the driver for the Touchpad Synaptic PS/2 Port/file name sp39279.exe which provides HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-60970-1&LC=en&DLC=en&cc=us&...

  (4) restart the laptop as requested.

  (5) perform an update from Microsoft.

  (6) install the Synaptic Touchpad PS/2 Port driver.

  7-restart the computer.

  (8) perform an update from Microsoft.

  (9) if the Synaptic PS/2 Port Touchpad Driver is identified again. Do not do an update this time.

  (10) restart the computer.

  (11) to perform an update from Microsoft and Synaptic PS/2 Port Touchpad Driver should not appear this time.

  Hey

  Check "Add Remove Programs" or "programs and features" and uninstall the Synaptics Touchpad software.

  reboot PC

  Take Synaptics Touchpad Driver

  Note: Your laptop Touchpad is not working correctly?

  Kind regards

  EverWin

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• Latitude d610 alps touchpad driver needed

  I had to completely clean my computer due to a virus. I do not have a cd. I need to the alps touchpad driver for my computer laptop latitude d610. Please tell me where to find it. Thank you. Lorene

  ... I need to the alps touchpad driver for my laptop latitude d610...

  Go to the Dell Support and enter your alphanumeric character 7 Dell service code in this page. The page resulting from this research will have all the drivers for your computer as it initially left the Dell factory. If you need additional drivers, they can also be searched, but this first page will give you a good start.

• Conflict driver HP 8550 with Synaptics Touchpad driver Toshiba Satellite running Vista

  Install a new driver HP 8550 created a conflict with Synaptics Touchpad driver Toshiba Satellite running Vista. Fortunately, I also have a Logitech USB mouse that works, but the system sees as the Synaptics pointing device... How do you get again my touchpad?

  Hello

  I suggest try to uninstall all the drivers connected the printer to the computer, download the latest drivers from the link below and install it:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=19736&prodTypeId=18972&prodSeriesId=25507&swLang=8&TaskID=135&swEnvOID=2093

  It will be useful.