TouchPad has stopped lighting up on top of my laptop satellite

Similar Questions

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• Touchpad has stopped working on Satellite A30

  The touchpad has stopped working, I tried most of what is obvious
  any ideas?

  Hi Phil,

  I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.

  HTH

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Satellite A200 - touchpad has stopped working

  I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.

  What should do?

  Why you n t trying to update or reinstall the driver of the touchpad?

  I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.

  Concerning

• My touchpad has stopped working

  Hello. I'm Zaitul and I Aspire E 15. the touchpad suddenly stopped working and if the cursor isn't even when I touch the touch pad. my laptop still can be exploited can I use an external mouse. but the touchpad is one of the important components for certain situations.  What should I do?

  I had the same problem happen to me only yesterday. I ran windows update and it showed the optional updates to install. One of them was the "Serial IO I2C ES controller driver Intel", which I clicked on update. It installed and required a reboot. To restart, I noticed that the mouse cursor disappeared during the connection and after that the touchpad was totally insensitive. I tried to disable/enable the touchpad with FN + F7, but that did not work. Fortunately, I had a classic USB mouse I plugged, which worked. Open the Control Panel, Device Manager, it showed the devices system/I2C controller with a yellow triangle next to it (showing that the driver could not run). I chose to restore the driver to the previous version, and the touchpad started working immediately. I suspect that you have the same problem.

  To fix:

  1. open Control Panel.

  2. Select and open the Device Manager.

  3. Locate the I2C controller in system devices.

  4. double-click on I2C controller.

  5. Select the driver tab and click on the button return to the previous version.

  6. your touchpad should start working again.

  7. close the Device Manager.

  8. close the control panel.

  I see the Acer response to this problem and their suggestion because I suspect that in the following days, there will be a large enough percentage of users of Acer laptops running into the same question.

• After cleaning the laptop keyboard, Touchpad has stopped working.

  Original title: Touchpad not working not

  Help
  I use a Compaq 615, my Touchpad no longer works after you have cleaned my laptop keyboard, but when I checked the setting of the control panel mouse it says "work unit". How can I get the touchpad working again.

  Hello

  This problem may occur if the Touchpad settings have changed.

  You can try to reinstall the latest drivers for touchpad on HP website and check if it helps.

  a. click Start, select Control Panel.

  b. double-click Systemclick on hardwareand then click device Manager.

  c. click on the PLUS SIGN to expand unit.

  d. click twice on the device driver.

  e. on the Driver tab, click on Uninstall.

  f. restart the computer.

  Synaptics TouchPad Driver

  If the problem persists, you will need to contact HP support for help.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Satellite 1900-303 Touchpad: has stopped working

  The touchpad on my Satellite 1900-303 has suddenly stopped working for no apparent reason. The touchpad icon has disappeared from the office toolbar & I do not see the touchpad listed in Device Manager. However, the ALPS touchpad driver is listed in the installed programs.

  The laptop runs on XP Pro SP2. Can anyone help with this please?

  Can you imagine that the TouchPad is defective and this may be the reason why it doesn't work?

• Acer Aspire 471 - V5 - 6876 Touchpad has stopped working

  Has been working well for a few days then suddly stopped working (no cursor appears and movement does nothing). Keyboard mouse external, fine when it's plugged in works fine.

  Rebooted and no change, no events in the log events for material, looks fine in Device Manager. I have not discarded with drivers yet, but it is brand new and worked great for the first 2 days. Tried Fn + F7 in case it has been disabled. It's computer of my mother, and she is a pretty basic user, so it is unlikely that she played with all relevant parameters.

  Any ideas? Help?

  I have had dealing with this problem for almost a year now.  I developed a small workaround solution that may be useful to others.

  If you let the laptop all of the time and the action set to "Do nothing" when you close the lid of the laptop... (breath),

  The touchpad seems to have sleep code of its own and will remain in standby state after opening the cover.  It is a design flaw (suspected).  The workaround is to hit CTRL-ESC and use the arrow keys to navigate down to the 'Shut Down', 'Hibernate', 'Log Out', 'Lock', function 'Sleep' in the Start button menu options.   Select 'Sleep' and leave the laptop you're going to sleep.  It must be completely in mode "Eve" in 15 to 20 seconds.  Once it is in a sleep state, press the ESC key and it will wake up upward with the Mouse touchpad functionality restored.

  Hope this helps

• the touchpad has stopped working and the slider completely gone

  Original title:

  Touchpad and cursor

  I have a Gateway NE 52209u with windows 8.  My touchpad worked fine, then all of a sudden the touchpad no longer works and the cursor disappears completely.

  I tried the fn and f6 keys but nothing helped, Please HELP!

  Hi Jacob

  Thanks for posting your question on Microsoft Community

  We understand your touchpad no longer works. We will be happy to help you with the problem.

  1. Since when you are confronted with the problem?
  2. You have a mouse connected to the computer?

  Problem may occur because of corrupted or obsolete touchpad drivers. I suggest you follow the troubleshooting methods listed below and check if that helps.

  Method 1: Run the hardware and the resolution of the problems of the unit.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Follow the steps below:

  (a) press Windows + W together.

  (b) write the troubleshooting in the search box right top corner, and then press ENTER.

  (c) click the Troubleshooting tab

  (d) click on display all option on the top left corner.

  (e) select the options of the equipment and devices in the list.

  (f) click Next to run the tool material and device.

  Method 2: Update another pointing device driver.

  Follow the steps below:

  (a) press Windows + X key when you're at the office.
  (b) select the Device Manager.
  (c) find and double click on keyboard and another pointing device driver in the left to uninstall Panel
  (d) right click on the device, and then click Update driver software.
  (e) select the search option automatically update driver software.
  (f) restart your computer.

  If the problem persists, please try the following method.

  Method 3: Uninstall another pointing device driver.

  Follow the steps to uninstall the driver.

  (a) press Windows + X key when you're at the office.
  (b) select the Device Manager.

  (c) find and double click on keyboard and another pointing device driver in the left to uninstall Panel
  (d) right click on the device, then click on uninstall.
  (e) restart your computer.

  Check the updates of Windows for the latest driver updates.

  You can download the drivers for the latest drivers from the link given here and install it. Select the download tab and select the correct computer model number.

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  You can also check for any error in the device for the keyboard Manager and the other pointing device driver and write us. Please follow the steps below to see.

  (a) press the Windows key + X Key on desktop.
  (b) select the Device Manager.
  (c) develop keyboard and other pointing device.
  (d) check if there is no error (! sign) or (?) Sign).

  Reply back with the results.

• Satellite M50 - A - ELAN touchpad has stopped working

  Hello

  My keyboard and touchpad no longer works out of nowhere (I think that it is after the update of windows?) and I can't seem to be able to fix it, I tried to reinstall the drivers for the touchpad and nothing has changed, as I could not find the drivers for the keyboard.

  can someone recommend me to do? I'm going crazy with this laptop!

  (The model is Satellite M50-A-118)

  Posted by osyeon
  

  UPDATE: I did a system restore and now everything works, quite naturally, this last update windows messed up with my laptop

  Thanks for the comments.

• Buttons and satellite C50-B-189 touchpad has stopped working

  my daughter received the foregoing, f. Christmas. the touchpad and associated buttons have stopped working -no cursor. How do we get working again? Stem +.

  Hi, this is due to the pad (which is buggy), just kill the process by using CTRL + SHIFT + ESC AND THE TAB more DOWN to navigate through the process target. I do it every start.

  Of tomsguide (November 2014):

  These patches do not help, all that happens is, after a while, the touchpad fails again. While Toshiba works on this point, I found a quick and effective solution. That's my new Windows 8 Toshiba.
  Press CTRL ALT SHIFT to get your process to come. Find the Touchpad "enhancer" process. Complete the process. Your touchpad works until the next reboot, how simply repeat this step.
  If you're struggling complete the process without being able to use your touchpad, I discovered a curious thing. If you hold a mouse click, you can move the arrow of the mouse with the touchpad very well. Its a bit... awkward... but all you have to do that is to end this process and after that, you can use the trackpad normally.

• Touchpad has stopped working on my Satellite L750

  Can anyone help please?

  The laptop was working fine then the mouse no longer works.
  I don't know if my husband has touched a button or if there is a problem.
  Any suggestions are appreciated.

  Thank you

  Hello

  Maybe just the touchpad is disabled? Try to use the FN + F9 key combination to re-enable the touchpad.

• Satellite C660-1F1 - touchpad has stopped working

  I just did a windows update and the touchpad stopped working.i have uninstalled and rebooted but it didn't help. Under the tab in the properties of the mouse it say material of "this device cannot start code 10".

  Can anyone help please?
  Paul

  Go to Device Manager and uninstall the device by following this step:
  a. click the Start button.
  b. Manager type of devices in the search box and press on enter.
  c. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. click on the view tab, and then select devices show hidden.
  e. check to see if you find any device with an exclamation mark on it.
  f. If Yes, right-click on it and select uninstall.

  Once you uninstall the device, restart the computer so that the changes take effect.