Touchpad not working not not on my Satellite 1110

Similar Questions

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

• Touchpad stopped working on my new C850 Satellite

  I have new Toshiba Satellite C850-B293 after a day can touch pad didn't work.
  Can someone help me? I already check the setting and I put in default, but still changes now.

  Please help me...

  On this virtual path, it is not easy help. We don t know what the problem is here.
  Please be sure to touchpad is successfully activated. Use the FN + F9 key combination and don't forget the touchpad is successfully activated.
  > I already check the setting and I put in default
  I don t know what do you mean with by default but if possible to reinstall OS again and test the touchpad with preinstalled OS own feature and factory settings.

  How to do that you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Satellite Pro A300 PSAJ1E: Touchpad not recognized using Win XP SP2

  Hi all

  I just got a Satellite Pro A300 PSAJ1E, which is preloaded with Vista. It is also comes with a 'product' XP SP2 recovery CD I had to use because of some software work with Vista compatibility issues.

  Unfortunately, everything works well except the Touchpad, which is not recognized by XP at all (without entries, error or not, in the Device Manager).
  The "Recovery" of XP CD installed the drivers of the Alps and the Toshiba Touchpad utility (for turning on and outside), so it seems that it is supposed to work.

  It is activated in the BIOS (which I have also flashed to the latest version, just in case) and is enabled in the software. I also rebuilt the laptop using the "Recovery" CD (the touchpad is not also recognized by starting on the CD "Recovery" which I guess uses WinPE).

  It does not work on Vista, so it shouldn't be a hardware problem.

  Someone at - it ideas?

  Thanks in advance.

  Andy

  Hey Buddy

  Well in your case I would recommend going to the Device Manager and remove the touchpad in the list of devices.

  Then visit the European driver Toshiba page, choose your model of laptop, Win XP OS and download the driver for the Alps Electric and Synaptics touchpad.

  Install both drivers, reboot the laptop and check if your touchpad will work correctly.

  Good luck

• Satellite L50T - Has - Touchpad not detected

  I have a Toshiba Satellite L50T-A running 64-bit Windows 8. All of a sudden my touchpad has disappeared from the settings. When I do a search for new material, it is not detected or the other. What a trendy?

  I wish I had pictures with exactly what I need to do.
  Thank you in advance.

  Hello

  If I understand you right touchpad is not detected and do not appear in Device Manager, right?

  Problem is that you can not do much and touchpad to work force.
  What you can try is to test the feature with the factory settings. With other words, you can set the BIOS to default settings and reinstall the original recovery image. After that this laptop will have the same parameters as for the first day after the first start.

  If you do this, and the result is the same, that it is possible that the touchpad is defective or there is a problem with the touchpad to the motherboard connection. This should be controlled by the service of Toshiba.

  You use an external mouse at this time?

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Equium U400 touchpad not working not

  Laptop repair of my daughter: screen dead, volume control wrote letters to the screen when you use and the touchpad no longer works.

  Replace the screen and the palmrest which included the touchpad, but still can not touchpad to work.
  any suggestions?

  Now, the screen is good, but no idea what to do with control of volume.

  Any help appreciated.

  > Screen is now good, but no idea what to do with control of volume.

  I had a similar problem in my case it was related to dirty sensor.
  I could clean it with a jet of compressed air perhaps it was little dust between the volume wheel and the sensor that knows to clean it worked.

  On the touchpad:
  Well, I put t know what might cause this are sure you that it is not disabled by Fn + F9 key combination? Check the BIOS settings not sure if there is an option for touchpad but many BIOS also contains the power button for touchpad
  Otherwise, it might be possible that you have made some mistakes, while replacement of this part is all the cables connected properly?

• HP Jet 11 - d 010wm: touchpad not working not

  Hello

  I have a HP flow 11. I have upgraded to Windows 10 and had no real problem until I decided to update the drivers (I sent a message that drivers were outdated). I generally don't click on something like that because it causes problems and it was obviously the case.
  After the update, the touchpad stopped working. I tried various fixes, but nothing has worked.
  
  At one point, I went into Add / Remove programs and remove the touchpad Synaptics hoping that, when I rebooted, restart located the touchpad and the driver and reinstall correctly. I was wrong and I think it was a huge mistake on my part. Now I can't get the driver to work I downloaded.
  
  Is it possible that I can get the touchpad to work again. I use a mouse and that works fine but not effective for a laptop.

  Thank you

  Alisonf1

  There are five drivers chipset on hp.com for 11 stream and one is required for the touchpad work, I think it's Intel series IO driver without the support of connected intelligence.  Who install and reboot and see if that fixes it and if not, install the other four.

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• Touchpad not working not not Z580

  Hello.

  First of all, I hope that my post is placed in the right place.

  Since yesterday my notebook computer touchpad (Z580) stopped working after full initialization of Windows 7 (I can use it for a few seconds) so I know it is not a material thing. I've also updated my drivers, still the same problem. And I can still use a USB mouse.

  I searched the internet a solution but without success.

  I have my laptop for about a year and I'm very happy with it.

  Hope someone knows the answer.

  Jeroen.

  Tanks, but since this morning my touchpad started working properly again without doing anything special.
  I don't know what started the problem, I tried many different things without success, I also restarted my laptop several times yesterday, nothing worked.
  But I'm glad its not now.

  Thank you for your support.

  Topic can be closed now.

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• Aspire E1-571 touchpad not working not

  Dear Sir, iam using aspire E1-571 laptop.it is bought on last august.but currently this touchpad not working.iam using usb mouse.please solve my problem quickly.

  Have you tried to turn the touchpad with the function key?

  FN + F7 I think

  A symbol:

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• Pavilion dm1 touchpad not working not

  Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
  In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
  Can someone help me please.
  Did all the updates that are offered by HP

  Hello Terry,

  Thanks for your help but the touchpad seems to be defective.

  I use a usb mouse.

  Kind regards