Touchpad stops working after hibernation on Satellite M40

Similar Questions

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Touchpad does not work after 2 Minutes - Satellite M40

  Hello world!

  I have a big problem with my M40. After sending to the Service Repair youcef, my Touchpad stops working after about 2 Minutes. I downloaded several drivers for it and everyone has worked for a few Minutes, but after a reboot the Touchpad stoped working after a few seconds or the pointer moves wrong and opens a windows loading.
  Any suggestions on how I could solve this problem?
  Thank you
  M.

  Hello

  Can you please tell us why the unit was repaired and what has been exchanged? If you have some problems after repair, please communicate with the technicians as soon as possible. They must guarantee for the operation of the equipment.

  If you want to check only I put t think the best idea is to install several drivers because this device has a driver for each component material. The best thing you can do is to use recovery media. On this way, you will have to factory settings. In this case, everything should work fine again (if the hardware components are not defective).

  Good bye

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Satellite U400: touchpad stopped working after Vista update

  Hello

  My Touchpad U400 cannot work after the upgrade, (under the Vsita system).
  I tried so many ways to solve, but still does not
  Did someone get hurt it?

  I tried to get into the BIOS to enable
  And also tried to download my touchpad driver (but I can find it)
  BTW, Fn + F9 does not work as well

  Please help me solve this problem

  Thank you very much

  > And also tried to download my touchpad driver (but I can find it)

  The touchpad driver is placed on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, one must choose the right laptop model (see the bottom of the unit model number)
  Then choose the operating system and the touchpad driver should appear.

  PS: there are two touchpad drivers listed on the page; Synaptics and Alps Electric
  Both must be installed!

• Acer ES1 - 511 Touchpad stopped working after the update to the latest version of windows.

  I just updated my Acer laptop ES1-511 (8.1 Win x 64) and my touchpad no longer works after a reboot.

  I went on the site driver of Acer and reloaded the driver Elantech, restarted and the same problem.

  I have went on the site Acer driver and reloaded the e/s Intel driver chipset, rebooted and reloaded the driver Elantech.

  Always without success.

  Help. Laptop is limited without touchpad utility.

  Go to the download site Acer for ES1-511 and get Intel i/o Drivers and reinstall it.
  us.Acer.com/ac/en/US/content/drivers/5345;-; Aspire 20ES1-511%
  Be sure to select Win8.1 64-bit as OS.

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Qosmio X 70: TouchPad stopped working after using a mouse

  I have a brand new Qosmio X 70 for about a week.
  In the early days I used it without any accessories and the TouchPad worked well. I got the mouse settings in the control panel and was able to activate a few gestures more which is the default value. I also checked the option saying something like "disable touchpad when mouse is plugged in.
  The next day, I was sitting at my desk and plugged a mouse into one of the USB ports.

  As expected the 'disabled' on the touchpad indicator was lit. Maybe it's that this indicator has disappeared after a while, but I didn't notice then. However, the next day, I tried to use the laptop without the mouse but then I discovered that the mouse cursor was no longer visible and the TouchPad was totally insensitive. The indicator was black.

  I also noticed after plugin a mouse back in the PC, control panel of the mouse in the control Panle does not display the tab 'Device settings' more... It's like the TouchPad no longer exists. Curiously, the key "Function" to toggle the TouchPad is pretending it's something when you press but has actually no effect.

  How can I get my rear TouchPad?

  Happy to know that everything is OK again.
  Thanks for the comments.

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Touchpad gestures stop working after sleep Windows *.

  This is the best advice ever! I tried and immediately was saved! Thank you!!

  For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
  

  
  

  Manual method

  • Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.

  Script method

  • Script: Create a .bat somewhere file with the following code:
    Taskkill /IM AsusTPCenter.exe /F

  When you run the bat file, it will kill the process.

  Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.

  To make the batch file:

  1. Open Notepad and copy/past this command:Taskkill /IM AsusTPCenter.exe /F
  2. Then click on save as and type .bat (remove .txt)
  3. Replace all files . the drop-down list and click Save

  That's all! Whenever the problem appears, double-click the file and it will fix it!

  Thanks to Teknokraten @ superuser.com for this solution.

  I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?