TouchSmart 15-f125WM: play the PS3 on my laptop?

Similar Questions

• How often to play the video on my laptop?

  I will be a video loop with portable computer connected to a projector.  My video files are 720 to 23.976 FPS in first Pro CC exported as .wmv and mp4.  This cadence will play smooth on my laptop?

  Thank you

  EF

  I think so, especially since it's the native f - r media. As always, testing advance is good & wise...

  Neil

• Nobody knows what a shader model 3.0? I'm tempted to play the fuel on my laptop (PC game) and whenever I click to run, an error window reading "shader 3.0 necessary...". "appears.

  PC game

  Quite new too; just released this year.

  Impressive graphics and all that jazz

  Hi Gjosh,

  Thank you for visiting Microsoft answers.

  A pixel shader is a set of program codes that is usually built into a graphics chipset and drivers. Its purpose is to allow more realistic light on 3d models, generally effects for games. You get this error because your video card does not include native support for pixel shader. It is possible to emulate the pixel shader using third-party software, if you have a fast processor and a good amount of RAM.

  I would say either you contact the manufacturer of your graphics card to download Shader 3.0 and install the same or you can use the Internet to search using your favorite search engine and download and install the same.

  IMPORTANT : Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• W2207h and stakes of the PS3

  Hey all,.

  I had a w2207 yesterday. It is a large screen, but he made some things funny with my ps3.

  When I got it, it was fine. I loaded a game, made a few updates, not a big deal.

  As soon as I tried to play "warhawk", the screen went on the fritz and turn itself off.

  Then, I turned on my PS3 and reset the resolution settings. It automatically back to 1080 p. Looked nice.

  I tried to load it again, and the screen immediately went black. I tried to reset the settings display and the PS3 again.
  This time, when I chose the automatic settings, the screen went black again. I couldn't get any resolution higher than 480 p without the screen goes black.

  How can I get my HD PS3 look back?

  -Edit-

  I played warhawk on 480 p and it is fine. Is not too evil eye, but I could still use the hi-def I had.

  I tested 720 p and 1080 p, and now is doing the static thing. I took a picture of the 'static ':

  PS3 w / W2207h on 1080 p

  Unplug the monitor and hold button power for 30 to 60 seconds.  Plug the monitor back in and give it a go.  The monitor works with a PC?

  Your TV is probably back the set video scale better than the monitor.

• Satellite P855-307 is not play the latest Blu - ray discs

  The Toshiba Blu - ray disc player is is more grateful or play the Hollywood movie Blu - ray discs.

  The recent Hollywood film set of Blu - ray discs in both my Pioneer HDD-Recorder/Blu-ray player and play on my PS3, it is why blu - ray discs are fine.

  Drive Blu - ray on the satellite p855 works so I can play Blu - ray movies non-Hollywood on my Satellite P855 (e.g. "in the shadow of the Moon") as well.

  This also indicates that the Toshiba Blu - ray disc player software can work, so something else is preventing the operation.

  BIOS 6.80 VICTORY
  Version of Toshiba - 1.05.207 Blu - ray disc player.
  Is Blu - ray zone B and 5 changes remain (never has been changed).

  There is no firmware update on the support site of Toshiba for the BD - ROM Pioneer BDC - TD04S.
  Satellite P855-307 runs the original OS (Win 7 HP 64-bit).

  Read the Readme to Toshiba Blu - ray disc player mentions AACS key renewal, although I don't see any way mentioned anywhere by which's made it.

  Corel WinDVD is of no assistance as a player, as well as the trial version of WinDVD 11 recognizes only Intel HD4000 graphics.

  Trial version of CyberLink PowerDVD can't read Blu - ray Disc movie Hollywood but will play non-Hollywood films such as "In the Shadow of the Moon".

  It seems you have a problem to play only some specific BD discs.

  I m not quite sure that your problem, but from my point of view it may be a problem of firmware of BD player. Unfortunately, Toshiba driver page does not only updates the firmware for the BD drive so will not be able to try a firmware update.

  I put t think there is a problem with the playback software (Toshiba Blu - ray disc player) because it seems that you are already using the last available Toshiba Blu - ray Disc version 1.0.5.207 player. If the software is already up-to-date.

  However, the freeware VLC player software/tools are supported BD disks too and play almost all formats and file standards.
  Recommend you test just to see if the problem still occurs even by using such usefulness of these tools.

• Problems to connect to the ps3

  Hello

  I bought the router e3200 around a month ago and everything worked well until about two weeks ago. Now, when I go on my ps3 I get internet connection and always bad cant hardly play games online more with all the GALs. IM assuming that it is the router because the internet connection is fine when I connect the PS3 directly to the modem. But the internet on my pc seems to work fine with the router, so I'm not quite sure. I tried to connect the ps3 wired / wireless, done all kinds of port forwarding but I'm still not getting the strong connection that I use to have. At first, I just wired my ps3 directly connected to the router with its default value and out of nowhere just got a low internet connection suddenly so I don't know what went wrong. If someone could give me a kind of Council, would be much appreciated.

  Thank you

  If your PC is running well behind the router without delay, it probably isn't the router causing lag.

  If you connect the ps3 with a cable he blames a delay to tell you, but if you are late in the course of the game only I wonder if you have other things running on your PC that can cause lag (downloads, torrents)

  Sometimes it also depends on what game you play online. Some games requires you to connect to one of the other players that have a connection lag.

  Also if you go to the network settings on your PS3 what type of NAT gives you in the view of the State?

  If this is the type of NAT 3, you will have a chance on connection problems while trying to play a game online.

  If it's NAT type 2, it should be good.

  Hope this helps you solve the problem

• Connection of the PS3 - WRT610N - NAT Fail problems

  Hi all

  Since I bought the PS3 in December, I was running that it connected to my Linksys WRT610N router.  The day that I have configured it first, it all detected automatically and off I went to play.  A few times, I've moved to the bedroom and played wireless.  In addition to entering the router WPA key, it does everything automatically.

  Today, the dang thing connects to the PS network.  I spent the last few hours troubleshooting 8.  I will list every little thing I did, but I have to ask myself why I never had to redirect the front ports, or anything else.

  I came to the conclusion that it is my router which is the main problem, because when I plug directly into the cable Modem, I have no problem.  Ironically, all my other devices operate on the router - phones, laptops, desktops, wireless TV and Wii.

  When I try the connection test, I get:

  -Obtain IP address succeeded

  -Internet connection successful

  -PlaystationNetwork failed

  I am able to surf the internet with the browser on the PS3 at this point, but no PSN.

  When I look at the connections and status, I get:

  -Internet connection enabled

  -Wired connection method

  -Speed and detection automatic duplex

  -Address manual settings

  Address - IP 192.168.1.20

  -Subnet Mask 255.255.255.0

  -Default router 192.168.1.1

  -Primary DNS 4.2.2.2

  -Secondary DNS 192.168.1.1

  -MAC address XX (no need to share this!)

  -MTU                           1365

  -Proxy server do not use

  -Available UPnP

  NAT - Type failed

  "Error code 80710092.

  I tried practically all the ideas of 7 hours of internet research has to offer on the following topics: "Unable to connect to PSN" and "failure of NAT:

  1. 1. -My PS3 has given a static IP address
     2. -Pedaled through different DNS numbers
     3. -Changed the MTU size
     4. -UPnP turned on and outside
     5. -NAT disabled
     6. -Someone said all ports are required
     7. -Enabled DMZ for the PS3 static IP
     8. -Off any other device trying to use wireless
     9. -Router firmware update
     10. -Restored by default on the router
     11. -Off "Filter anonymous Internet requests" (against my better judgment)
     12. N ' matter what firewall disabled (against my better judgment)

  There are only two things that I considered that I read by train:

  -Restoration of my default PS3

  It does not appear that this would be the issue but because it connects to the NHP when it is connected directly to the cable Modem.

  -To reset my router VRAM

  Looks like a longshot.

  Can anyone help me please with other ideas?  It's driving me crazy!

  Thank you very much in advance.

  I tried all the suggestions without result.  Now the problem is solved well.

  Solution?  The intensity of my internet cable signal was too weak for the router to divide anything.  That's what the tech explained to me in any case.  I was at-22dBmV and minimum of society is - 10 at the end of the cable (computer, PS3).  The technology fixed a bunch of bad junctions in the House and then realized that I was at-10 in front of my computer now.  He said that a line technician would be fate soon to take a look at the line coming because it is especially where the weakness is.

  As soon as he left, I turned on my PS3.  I got a connection NAT2.  Playstation Network still not, but it of because Sony sucks and has been offline for a while.  I'm sure that it will work as he recognixes the network is stopped and got a NAT2.

  Thank you all for the suggestions.  The moral of the story: do not exclude anything when troubleshooting.  I was sure to have been the router and waited several days before calling the service provider.

  If you're curious of your modem stats, most have an IP address to dial.

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• U2713H with the PS3 is a go?

  Hello

  I just got the U2713H as a replacement for the old U2711. I tried to plug my PS3 (Playstation 3) to the U2713H via HDMI but I got a white screen saying "Entering power saving mode" when I put HDMI as input source. The DVI cable is connected at the same time to my PC.

  If I take my PC DVI cable out (or if I turned off the PS3), the display shows as if I have not connected an HDMI cable.

  I'm sure that the HDMI cable works fine, because it is the same cable that I used to connect to the old U2711. If I use the HDMI cable to connect to my PC (instead of using a DVI cable), it works too

  If I want to connect my PS3 with the HDMI cable that plays around the screen. Is it a defect? Monitor is new (refurbished, I think), REV06
  I tried to reset to factory default settings

  The U2713H HDMI version is 1.4, 2560 x 1440-60 Hz.
  The U2711 HDMI version is 1.3, 1920 x 1080 60 Hz.

  Part of cable HDMI in Dell T516N

  Or find locally for this: Nitho Gaming HDMI 1 cable. 4 b

  One user posted this. I guess these are the PS3 instructions:
  * Go to settings - display settings
  * Do scroll down until you see the full range RGB (HDMI) and switch to full, otherwise the colors will be washed out. This applies to all screens
  * Go to settings - Video settings
  * Scroll and select 1080 p 24 hz output (HDMI) and select Off from the U2713H Dell can't stand jerking 24 Hz Blu - Ray game free back but can play movies smoothly when the 60 Hz option

• Can you connect U3014 DELL to the PS3?

  OK, I have the old dell 3007wfp 30 '. I tried to connect my ps3 to the screen via hdmi/DVI. It did not work. I can't play either any Blu - ray movie via computer on this screen.

  Now, in the next 2 weeks, I plan to buy the new U3014 from DELL. I'm still very happy with my old dell 3007, but I also want to connect to the PS3.

  My question is can connect you the new dell monitor 30 ' to the PS3 and it allows to play games? I mean that the new screen has the hdmi connection, so maybe it works with the PS3? Can you also use it to watch Blu - Ray?

  The naturalness of 2560 x 1600 resolution can prevent connection and using the PS3 and watch Blu - ray or he makes the adjustment of hd resolution?

  The only reason why I'd buy this monitor is if I can connect to the PS3. Can any representative dell or Dell U3014 help me?

  Hi Mary,

  Dell U3014 comes with HDMI output and you should be able to connect with the PS3 to play games. However, you will need to connect external speakers to "Audio output" to get the sound output as there are no internal speakers in U3014. The monitor is capable of resolutions up to 2560 x 1600 and should be able to play Blu - ray videos without any hassles. You can refer to the technical specifications of the monitor available in Guide user here.

  I hope this helps. Answer please if you have any other questions.

• does anyone know how to fix NAT TYPE failed for the PS3?

  I tried to play modern warfare 3 online for the past few days, and this is the first time that I had this problem when I bought the ps3 I just signed up to the playstation network and put it in my drive of cod mw3, I didn't have to open all ports or whatever it is, I played for about a year and a few days ago I turned on my ps3 and tried to play and nothing happened so I checked my connection and everything was connected, Internet, ip, and sony all have works well but my nat type has been down for about a week now, I reset my modem several times, I have a Siemens Gigaset se567, I tried the connection cable and wireless and Sony, I opened the ports I had and DMZ on always I net type Failed. so if anyone can help me it would be greatly appreciated. Thank you

  We have a separate community for Playstation products. Please click here for assistance.

  If my post answered your question, please click "Accept as a Solution."

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my stereo system H D - Bike. I'm 10 Windows on my PC

  I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike

  stereo system.

  I'm 10 Windows on my PC

  Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.

  TT2

• Alphabetically when you play the song on the album

  When I chose to play a song on an album, the next high feature shows the songs in alphabetical order, instead of the next song in the album. This happened after I updated iTunes to the latest version. 12.5.1

  How to disable this option? It's incredibly annoying.

  Thanks in advance.

  I have a similar problem... When you say alphabetical ordered song it is for your entire library or in the album. I have a problem where he plays the next alphabetical song in my library...

  If I have:

  (a) play a song and let it run all the way, the next piece seems to be the next song in alphabetical order in my entire library regardless of the artist/album.

  (b) if I start a song playing and press the "skip" button, the next piece seems to be the next song in alphabetical order in my entire library regardless of the artist/album too.

  I turned random and stopped playing the song seems to have been fixed, as if the random parameter was reversed on is off and visa versa... Although random shouldn't be alphabetical?

• There is no sound when I try to play the songs of desktop PCs.

  There is no sound when I try to play the songs in my library or radio.  The speakers are very well because I can play from iTunes radio on the internet and local music. I've deleted and reinstalled iTunes, restarted my computer and I know that the sound is turned on. Curiously, it seems that the song moving forward and does not in fact (the blue line streaming lights up blue when I select a song or an advance to the next song.

  See the replies in this thread:

  iTunes no sound