TouchSmart HP ENVY 17-j122sr: J1Y77EA #ACB recovery kit

Similar Questions

• TouchSmart HP ENVY 17-j017cl: the recovery attempt failed. Select one of the following buttons.

  I have a

  HP ENVY 17-j017cl Notebook computer Touchsmart I bought 4 DVD for HP Recovery supports a month previously, when I I want to recover I get this error explained below.

  I was trying to fix it, I did the following;

  1. turn on the wifi

  2 bios date was set before the 22/06/2014

  3 reset the default bios

  BUT THE ERROR PERSISTS.

  

  By selecting Save Log asks to insert a USB key which shows essentially the same message as details (see below).

  

  Message;

  [15:35:01.68] ChkErrBB.CMD: detect an error in the PININST_BBV.

  [15:35:01.68] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  [15:35:01.68] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  Selecting retry invite you for the recovery media, essentially the first DVD of the media of recovery sent by HP.

  

  There are 4 four total drives, 1 to 3 are recovery DVD and an extra drive

  Hi there @ako89kurdish.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter.

  Cables and devices to disconnect all the connected such as personal media players, USB drives, printers and faxes. Remove support for internal hard drives and remove any recently added hardware internally.

  It may be necessary to disable startup secure in the BIOS to start the computer using recovery media (CD/DVD or USB key).

  The new recovery for 2015 fall update manager must be downloaded and installed to successfully carry out a recovery of the system using HP Recovery Manager.

  It takes a minimum of 3 GB of free space to install the update in the Recovery Manager.

  Do you back up all personal files and read all of the instructions required warning before performing a system recovery? To backup your files will result in a loss of files and information you don't want to lose.

  To get the instructions back up and save your files, see back up your files (Windows 10: 8).

  The full recovery process may take 4 to 6 hours or longer to complete. For best results, the computer must not be connected to the Internet. The computer will restart several times during the process. Do not turn off or interrupt the recovery process until the prompt to log on Windows.

  Here are a few links to a thread in forum where other people have experienced similar problems and solved it: detect an error in the PININST_BBV

  I also found the Troubleshooting of HP system recovery document for you. Please follow the troubleshooting steps in this document to help you with the attempt of recovery failure.

  This answer solve your message or question? If so, please share the good news! Inform others that this answer was helpful by clicking on the accept button Solution. You can also show your appreciation by clicking on the laurels.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. If you need assistance, I would be more than happy to help! Please just re-post with detailed troubleshooting results!

  Have a great day!

• TouchSmart HP Envy 14 - laptop occasionally starts with black screen

  Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL

  My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?

  Hi Shibein:

  Thank you for your inquiry.  You can run the HP Support Assistant click here to help solve the problems and search for updates.  You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have.   "How can I find my model number or product number?" click here.

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• ENVY 17-n152sa laptop: good code for HP DVD System Recovery Kit

  A few days ago I bought a laptop at Currys - London - UK model 17-n152sa

  I faced the problem and it is not possible to make the system of HARD drive recovery. It seems that the system is corrupt somehow allowing recovery only up to 49%, then always failed.

  I need a GOOD CODE to buy a HP Recovery Kit witout a payment, free of charge, as the laptop is under warranty and I am traveling abroad (Brazil).

  How to get this COUPON CODE to get HP Recovery Kit for free?

  Instead, call HP for disks

• E9G80UA #ABA: DVD OR USB Windows 8 64 b + Supp 1 Recovery Kit

  I have a

  HP ENVY TouchSmart 17-j017cl Notebook PC (ENERGY STAR)

  I lost recovery ((8 original windows and hard disk))

  Please can someone help me or send me

  USB OR DVD - Windows 8 64 b + Supp 1 Recovery Kit
  System Recovery Kit for Consumer Notebook (4 discs) or USB flash ((BY LINK))

  It is a forum for helping hand in hand. The only presence that HP has on this are Admins and Mods. Otherwise, none of us works for HP.

  Here is a guide to help you order the laptop recovery disks.  I can't guarantee that it will be available, but the only way to know.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• CQ71 - installation of the recovery Kit

  Does anyone know if Win7 is pre-activated on HP Recovery Kit discs?

  I have a CQ71-314SA with problems of nasty virus that killed the system partitions and recovery, also my recovery discs have been scratched and are unreadable. To make things worse, the COA Win7 sticker is worn out and I can make only the ends of the license key for installation from a normal Win7 oem drive is not an option.

  See you soon

  Hello

  If you reinstall using a set of HP recovery disks, it will activate automatically, so you will not have your product key.

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  

  Kind regards

  DP - K

• Pavilion dv7-1260us: HP recovery Kits

  How is - a order a Kit recovery for the Entertainment PC dv7 laptop?

  I need to reinstall the HP software and Vista operating system?

  Instructions for ordering kits provided in the title of the HP support on hp.com do not agree with the displayed Web pages by following these instructions.

  Hello:

  I don't see that you can order more online for this model recovery discs.

  You can try to call HP at this number... 1-(800) - 474-6836 and see if they can still be ordered by phone.

  If this isn't the case, you can always get a game from this provider no HP on the link below.

  http://www.computersurgeons.com/p-16644-recovery-kit-513552-001-for-HP-model-number-dv7-1260us.aspx

• Recovery KIT

  Hello, good morning. Please, I tried to ask for my HP Recovery Kit. Unfortunately, my warranty period has elapsed. So I wanted to know if it is still possible to get it and the available payment options.

  If you are in the Canada or the United States, it should be possible to order online your support page, with a credit card. What is the full model or product number of your laptop?

  Click here > > How can I find my model number or product number

• Spectrum of HP x 360: creation of Recovery Kit

  Hi all

  I just bought a spectrum HP x 360 running Windows 8.1, with no recovery DVDs provided.

  I noticed that the recovery Kit must be created on the USB stick with a capacity less 32 GB (even it the necessary space is 22 GB?) I don't remember the steps between 16 and 32...) or DVD.

  Is there a way to create an image and save it to a hard drive? I am not internal nor external DVD burner, and I don't understand how not to use a 32 GB USB...

  And what happens if I need to change the M2. SSD? What kit would be of any use?

  Thanks for your reply.

  Concerning

  It must be a 32 gb or usb more fat to make the recovery USB.

  If you wish, you can buy a HP recovery

  You can order materials from HP recovery below, or call HP on the phone to order 1-800-474-6836

  http://support.HP.com/us-en/document/bph07143

  .

• factory software recovery kits

  Have a HP Pavilion Center m8457cPC, produces Nbr KJ396AA #ABA, with a bad hard drive.  Help gettting factory software level for this make and model computer would be appreciated that so far my efforts have been in vain.

  Hello:

  HP doesn't seem to have a recovery disc for your model any longer, but you can always get a game from this provider no HP on the link below:

  http://www.computersurgeons.com/p-16070-recovery-kit-kz863av-for-HP-model-number-m8457c.aspx

• P2-1033W not answer during recovery using HP Recovery Kit

  I try a system recovery using the HP Recovery Kit. Windows 7 is the operating system.

  I insert disc 1 into the computer and it seems to start the process. In a few minutes, he gets to a screen similar to sunlight at the top that shines through a blue sky and the rest of the way. There is no HD activity light or a message on the screen. Only the mouse cursor is on the screen. I want to know if it of the way the process works, or is the computer hung up? The screen is this way for more than 45 minutes. The instructions say the process can take two hours, but it does not say what should I see on the screen if anything.

  Sorry for the delay in response to your suggestion.

  I tried to use the hard disk recovery program. However, the program has never worked for me. I received a message stating that "Recover Manager cannot restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef0003" this is the reason why I bought the recovery Kit.

  My final solution was to use a new HDD (WD 500 GB) with the recovery kit. I always had problems with the program past fashionable unanswered. The system seems to lock up periodically. I decided that I had a memory problem, so I did a test of memory on the system. The memory also hung up test. I removed the memory stick of 1 GB and run the test again. This time she completed with no blocking. I then put the 1 GB module in the system and run the memory test. This time it completed without any problems. When I finally got the recovery kit program to work once again he completed 100 percent instead of the lock up to 70 percent.

  Instructions for use this recovery kit is very basic, in my opinion. HP want me $49.99 for technical support in answering my question on the way to know if the program actually work load. After paying for the recovery kit I considered not just as a good option. I lost a lot of time because I didn't know if the system fails or if it still worked. I would not recommend this system to anyone. If it belongs to my sister, I would have thrown it out the window a long time ago.

• Switch 10 Recovery Kit Acer problem

  Hello. I deleted the partition recovery of my tablet. After contacting Acer Care, they sent me the recovery kit. I insert the bootable dvd in an external dvd player usb, it starts, but when the program starts and I have to choose an option to continue, I see this windows: https://www.dropbox.com/s/5bkb0gqq1qua44q/WP_20160205_07_33_53_Pro.jpg?dl=0

  When I click on the first, I see this review: https://www.dropbox.com/s/g3l5z6a4l6xvxfn/WP_20160205_07_34_06_Pro.jpg?dl=0

  At this point I can't do anything. I tried to format the C: partition with diskpart, but the message remains displayed. I don't know what I have to do to get my tablet... Hope you can help me. Thank you

  you need to completely erase your SSD, must have not only affected raw storage.

• Need system recovery Kit as soon as POSSIBLE for s7700n

  I am repairing a Pavilion s7700n for a friend and the system restore failed. I need a set of media System Recovery Kit to rebuild the system, in particular the special software that has been loaded. It seems not to be available on the site of Support of HPs. Any help would be greatly appreciated.

  System has Vista Home Premium 32-bit and P/N RK576AA.

  Thank you.

  Larry Riley

  Google and Bing search will be your way to source a seller who has yet a recovery for the older Vista desktop kit.

  It was the way I used to locate this seller online.