Tour of dimension 5100
too many times and is only used as a guest computer! Any helpful suggestions or
Comments would be greatly appreciated?
Fenwoodsugarbear18,
I think I'll give you a try, maybe that could also clear up the things that I'm not aware are a problem?
I initially do not remember what the key of the OS has been but realized it was on the computer of the firm. I really appreciate your help. Is it right to mark your help as to solve the problem? And if you will pass this message on the forum of BONE would be great.Thanks again,
Tom
Yes Tom, please mark resolved because it helps other people who come on the forum for help. I'll move this thread for you and ask a forum OS people to monitor your messages if you need assistance.
Tags: Dell Software
Similar Questions
-
To factory without recovery CD Dell Dimension 5100
My parents have a Dell Dimension 5100 with Windows XP Media Center Edition Version 2002 Service Pack 3. It works well just very slow because it is clogged with old software and unwanted. They want to give my grandmother to use, so I need to get done restore to factory settings, it's like a new computer for her. However, we cannot find the CD that came with it (other than a resource CD).
Is there a way for this restore without CD? I have the OEM code, XP product key, Service and Express Service Tag label.
I need to do this ASAP. Grandmother's hard drive died yesterday, and already, it's called once today ask when it would be ready LOL.
Assuming that the hard drive has never been reformatted or replaced, you can reset the PC to the factory image by restarting and quickly by pressing the Ctrl and F11 keys and following the instructions. EVERYTHING will be deleted including all personal files, so they must be backed up on an external first.
You must reinstall all updates from MS for XP (hundreds of them) and all your software and personal files after the restore, which could take days, depending on your internet connection speed.
Keep in mind that XP is no longer supported by Microsoft, and there are a lot of no fixed security problems. Thus, the PC might be infected very quickly if Grandma goes on the internet.
Maybe you should just buy him an inexpensive Inspiron with Windows 10 which will be much more secure and probably faster than the D5100.
-
Dimension 5100 not recognize the second hard drive
OK have installed a second SATA (500 GB western digital) in my dimension 5100 (running XP)
Player works OK (swapped recognized in bios)
Cable works OK (swapped recognized in BIOS)
But wil not reconise whatever related to the SATA 2 port on the motherboard.
The road is on the BIOS.
Don't know what else to try, the real port would duff or have I missed something simple
Thanks for any help
Dave
-
Dimension 5100 cd/dvd does not
Hi guys. All of a sundden my cd/dvd has stopped working, I can't even see on the list from my computer. I get error 19 and I tried that everything listed here without success. anyone has an idea what shouldI do?
Thank you
-
Systematic issue of Dimension 5100 hard drive replacement
I have a trashed h/drive and have ordered a new 250 g sata drive. After that I installed, what should I do? Format? loading XP? the m/Board will recognize?
Thanks for any help
-
Master IDE HDD to slave in Dimension 5100 DVD burner
Hello
I just added a disk IDE (PATA) (jumper to master) to the same controller that my existing DVD burner, now set as slave. the two IDE channels is enabled in the BIOS and the hard drive passed Diagnostics. But the new IDE HDD is not recognized by Windows, although it appears like a hard drive under Device Manager.
The recommendation of the forum seems to favor using an external HARD drive enclosure, but I'm not willing to do unless it's the only way to make it work.
What else is required to complete the configuration? I am running XP Professional.
David
-
Dell Dimension 5150 do not start LED logo on 123 + progress bar is stuck at 5% no beeps
My old Dell Dimension 5150 has sometimes suffered from crashes during startup for quite awhile, but it now appears permanent.
The symptom is the logo dell appears, but the startup progress bar stops at 5%, diagnosis LED 1,2 & 3 are stable on, power light is green fixed, no beeps, no response to the keys.
In the past disconnecting the cable for 5 minutes, which gives all the internal connectors a re-allocation of places, you try to start again seemed to do the trick, but no more.
Any suggestions where to look?
No such thing as PC2 4300 except for sellers who are less honest.
http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/dimension-5100
PC2 4200 is too slow
PC2 5300 5 5 5 12 works fine. Suppliers must match for speed and the CASE.
Blockages can be feed if it isn't certified EPS12v PFC.
Minimum recommended is CS750M Corsair.
http://www.crucial.com/USA/en/dimension-5100/CT667636
Supplies are not units of 12 v x watts.
You need 150W on the 3.3v 5v Rails and 15-20w on the + 5VSB rail.
RAM RAM may NOT BE ECC or buffered or Registerd HIGH density AMD. Must be LOW DENSITY INTEL Compatible ram.
RAM cannot BE QUADRI ROWS can operate 2R and 1R, but you can NOT MIX the ranks. They must all be single or dual rank.
http://www.Newegg.com/product/product.aspx?item=9SIA7S63715258
-
Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please
Thank you for your help. Here are the answers your request:
"Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
Complete error message: "Missing Component - required component Media Center is.
missing. Please contact the manufacturer of your hardware.
KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.
Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.
The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.
Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120
Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.
Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.
PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).
-
Original title: deleted Ethernet adapter
Hello
All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.I tried to insert Dell drivers and utilities disk, but that does not change.I tried to download on an other computer files from dell that look like they are pilots.I tried to set up a new connectionNone of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?Thank youKevinHello
1. what you're trying to fix by running registry cleaners?
2. How did you remove Ethernet card?
3. How are you online using other devices?
4. What are the devices are?Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Registry problems cause hard disk by clicking on, then blue screen
Dell support said the clicking hard drive and next blue screen is caused by a registry error. In order to solve a problem of major virus and start over, I have completely reformatted the hard drive and installed the operating system and other programs, so I can't understand why I always have a registry problem. Although I can not specify the exact moment, it seems to happen after an update of Windows, but also occurs at random. It would also be the installation of MS Office 2010, because I do not remember what happens before the 2010 Windows Installer. I read that registry cleaners do not work, so I am at a loss for what to do. What I don't understand is how the registry is damaged when all that I've done is install everything from scratch. I have a Dell Dimension 5100 running Windows XP Home Edition w/SP3.
Hi LiveToFish,
1. What is the problem on the computer after reinstalling Windows?
2. don't you still get the errors blue screen on the computer? If so, then what is the message on the blue screen?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.
Procedure to view and manage event logs in Event Viewer in Windows XP
-
My Windows 7 Ultimate product key has been blocked please help
Hi, I've been using windows 7 for about a month until a few weeks ago. When I started my PC it says that
Windows 7
Build 7600
This copy of windows is not genuine
I don't know why this has happened as it was fine before, I tried to turn it on, but it says that "this product key has been blocked by microsoft" can someone please explain why this happened I ran the diagnostic report...
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - FF3XX - 77DMB-MDMQ3
The Windows Product Key hash: xAeLQW1w3CM66wpnZFn6od/GkYA =
Windows product ID: 00426-067-3204723-86717
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {FDBE767D-3E74-4E3A-9A6E-E7D5D56D0682} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7600.win7_gdr.100226 - 1909
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 108 VLK invalid
Microsoft Office Enterprise 2007 - 108 VLK invalid
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Users\Dell\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->
Office details:
{FDBE767D-3E74-4E3A-9A6E-E7D5D56D0682} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 32 *-*-*-*-MDMQ3 00426-067-3204723-86717 5 S-1-5-21-4221809875-1077414371-4188047510 Dell Inc. Dimension 5100 Dell Inc. A03 20060707000000.000000 + 00064B93607018400FC 0809 0409 GMT Standard Time(GMT+00:00) 0 3 108 108 Microsoft Office Enterprise 2007 12 7480B9502DF0D86 oYWOW5ayFE3pZ jvTpuXYsY64JE plus 89388-707-8722531-65362 14 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385
Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-067-320472-00-2057-7600.0000-1982010
Installation ID: 005811930862457055912375892861264201060972382930684844
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: MDMQ3
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 3
Trust time: 2010-07-17 00:34:34
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 7:17:2010 00:18
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
--> HWID data
Current Hash HWID: NAAAAAEABAABAAEAAAACAAAAAgABAAEAeqh07KxCSOSqdgZUVpiulwaHmoigvRIbTh/sow is
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value ValueOEMTableID
APIC DELL 5100
FACP DELL 5100
HPET DELL 5100
STARTING DELL 5100
MCFG DELL 5100
SSDT DELLst_ex
ASF! REFERENCE DELL 5100
Please answer soon because I really want my windows 7 back
Windows product ID: 00426 -067 - 3204723-86717
EDIT: Additional information
Things to watch for.
Recently reported several cases of blocked MSDN keys packed with the media looking legitimate. I can not stress enough to save your packaging, media and reception, if you buy software such as this to appeal to the Bank, you bought it and report it to www.microsoft.com/piracy
If you bought a key, with or without DVD or packaging of EBAY, or any other person or seller and this could be a MSDN key because your key has been blocked you can check a few things yourself, if you have received your key with the physical product go to www.microsoft.com/howtotell and check your product, however some counterfeit software are thus convince you may not be able to identify it as such.
To check your PID press the key to victory and the pause at the same time, or system opened via the Control Panel, scroll to the activation section and properties related to computing PID will look something like this 12345-067-1234567-54321, the part that you are interested in is the section to three digits, if it corresponds or is included in one or two digits for the examples below You probably have a MSDN key.
065, 066, 067 for Ultimate, box 220 for Pro and the 230, 231 area of award, there are probably others, but they should be close to those that are displayed
If you have a similar PID, or your key is blocked and you want the confirmation message, a new thread with a report from the MGADIAG tool, download and run the tool, click on copy and paste it in a new post here and Darin Smith of MS can check your key for you. NEVER send your keys, the report will be sufficient.
Go.Microsoft.com/fwlink/?LinkId=52012
By Carl Oh, more:
Stuck key (error 0xC004C4A2):
http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Installing the software digital camera HP Photosmart M627 CD Compatible w/Windows 7
I switched from Windows XP to Windows 7, a year ago and digital camera HP Photosmart M627 (model L2420A) and the installed software CD originally was not compatible with Windows 7. So, I have not been able to download pictures from my camera to my computer to store and/or customize.
I tried other photography software, however, I definitely prefer the software designed to work with my camera. Anyone can learn how to navigate the site Web (HP) to locate the same? Thanks in advance!
Dell Dimension 5100, Windows 7 Ultimate Intel (r) Pentium 4CPU, 2.80 GHz GHz 2.79, 200 members, 32 bit OP,
SP1; Google/Firefox 29,0.
SweetFacz75
Hello
We now have new cameras almost every two weeks and all phones that can take pictures that why, after a few years, sellers don't update their software because VERY expensive to support the dying products. If you need a photo editor, many free good software around software:
http://graphicssoft.about.com/od/pixelbasedwin/TP/freephotoedw.htm
Kind regards.
-
I just upgraded my Dell Dimension 5100 to Windows 7 from XP. I can't get any internet connection with cable or wireless. I think the problem is the PCI modem. Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?
Original title: MODEM PCI FOR WINDOWS 7 DRIVER
Thank you for your comments. I use the dial upward. However, my PC does not connect to broadband, even with direct Ethernet cable connection or adapter wireless Netgear WPN111, I used happily with XP on the same computer. Device Manager displays the PCI as incompatible. FYI, I downloaded and installed the latest drivers for the wireless card.
Install the following:
Dell systems must run more stably once they installed. I would remove the modem PCI card.
Intel Pro/100 VE Ethernet should work natively with Windows 7 as Windows 7 has built-in driver:
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18268&lang=eng
Then the Netgear Wireless Adapter for Windows 7 driver from here:
-
Using PC Restore to factory with 2 hard drives
I have a Dimension 5100 and I would like to restore it to factory settings, using PC Restore (when you press Ctrl + F11 at startup pointing upwards). I added an additional hard drive (segate 250 GB baracudda) and wonder if the process will wipe that animate as well. I want to leave that not affected one player I am wondering if it is necessary to unplug. The hard drive is internal.Thank you
-
Having a Dimension 5100 and an internal TSST corp CD - RW TS-H292B & HL DT St DVD ROM GD R8163B I can't get a DVD to burn, but I can burn CDs... I made Diagnostics and it says that drive O don't past Drive 1 no disks and disks 2 and 3 were in charge... Any suggestions would be helpful at this stage...
Maybe you are looking for
-
Can I purchase applecare if I buy a mac from another online store?
Hello I just wandering if I intend to buy a new Mac in a computer store online (but), I'm welcome buy applecare on the apple store then? Yuchun
-
HP envy m6 (driver not found)
Hello my pc is a hp envy m6-1250eb I had long ago my set PC upgraded to Windows 8.1, but now it seems that the drivers are not found there AMD Radeon hybrid blocked and USB - IF USB Host Constroller xHCI (with a yellow triangle) If I click o properti
-
Problems with melodyne 4.0
Problems with melodyne 4.0
-
Multiple monitors use on Tecra M2
I wish I could use 2 additional monitors on my Tecra M2, currently I use a docking station I plug a monitor extended in and that works very well, is it possible to hook up a 3rd monitor in the plug of the monitor on the right rear of the computer lap
-
Internet access computer looking for a dialup connection everytime I try to log
Original title: Internet access Why my computer is looking for a remote connection everytime I try to log in? All my computers are connected to the DSL. I get this window pop up on two of my computers and I have to click on connection settings and