Trace fle readable mode conversion procedure

Similar Questions

• APs 1242AG LWAPP mode conversion problem

  Hello

  I have a few APs 1242AG to convert standalone in LWAPP mode. The conversion tool (v 3.4) keeps giving me an error saying that there is a list of firewall or preventing work TFTP access.

  It is this time I use the internal TFTP server in the tool or TFTPD32 on the same PC or even if I leave the picture in TFTPD of flash on the 2960 POE switch I test the upgrade on the access point is connected to!

  If do it manually one ' archive download-sw / overwrite/no-set-boot tftp: / /... ". "since the console telnet on the same access point, it downloads the image very well. I can also copy the config for my TFTP server!

  It's driving me crazy ideas that I hurt APs to LWAPP mode.

  Oh the WLC is a race 5508 latest 7.x code, but I don't think that's relevant here.

  Concerning

  Pat

  Hi Pat,

  It's just a warning msg.

  Thank you

• Color test Acrobat DC - no output mode conversion

  Hi I have a PFD I want to convert colors to a specific color profile Acrobat DC but the output mode is not in use - is it because I'm using an Acrobat of the trial?

  Hi susannahp30751430,

  Thanks for your report.

  The option mentioned by you in the screenshot, for the output mode, in the first place will be not be enabled for files that don't contain any output mode . Please check the PDF file contains a.

  Reference: using Acrobat | Conversion and ink colors (Acrobat Pro DC) management

  PDF files that don't conform to standards such as PDF / X or PDf/A, often lack an output mode.)

  To verify that your file contains an output mode, please check PDF / X using the before the flight-> select check compliance with PDF/X-1-> Analyze.

  Thank you.

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• 1242 AP of Standalone LWAP mode conversion

  Hello GS.

  Can you please tell me how to convert 1242 autonomous access point / infrastructure mode LWAP mode.

  I'm not able to intergrate with my 2100 controller.

  Ap1242 details below: -.

  DH_3750_SWITCH_STACK #sh cdp nei fa 3/0/21 in detail

  -------------------------

  Device ID: ap

  Workshop / entry:

  IP address: 10.120.249.3

  Platform: cisco AIR-AP1242AG-E-K9, capacity: Trans-pont IGMP

  Interface: FastEthernet3/0/21, ID of Port (outgoing port): FastEthernet0

  Hold time: s 129

  Version:

  Cisco IOS software, software of C1240 (C1240-K9W7-M), Version 12.3 (8) JEA2, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2007 by Cisco Systems, Inc.

  Updated Wednesday 17 July 07 23:02 by CCIC

  Thank you

  Mirza.

  Hi Mirza,

  You have two options.

  One, amounted to autonomous and re-return to LWAPP.

  Two, the command is "disabled" because you're already using LWAPP image. Your LWAP contains two IOS images: it has the prefix "RRs" and the other is the image downloaded from the WLC. Delete this image, let the AP boot image "RRs" and run the command again.

• Conversion procedure PL/SQL in SQL SERVER

  Hello
  I'm converting SQL Server procedures in Oracle procedures using scracth translation Editor.
  Instead of converting the proecdures in proocedures Oracle utility is converting them as Oracle, no idea why it is doing this?
  
  Please notify.
  
  Thank you
  FM

  Hello

  Did you use the feature updates checking or manually download the jar file? Checking for updated works far for me sometimes and sometimes not. For manual installation, then you must add an entry for the jTDS jar here...

  Tools-> preferences-> database-> third of JDBC drivers

  Hope this heips
  Gary
  SQL development team

  Published by: Gary Graham on March 26, 2013 08:32
  Seems that I misread your message. If you have downloaded the jar and added an entry for her in the third of the JDBC drivers, Sybase and SQL Server tabs must be present in the new connection dialog box. Especially if you have unzipped Developer SQL in a directory is empty and your user preferences settings are located in a directory that always remains accessible in writing for you. Make sure that your installation is clean.

• ERROR: DW071: ERROR: DW003: when you try to install CC Photoshop and Lightroom CC [title edited for readability - mod]

  Installing CC of Photoshop and Lightroom CC on a desktop Dell with Windows OS 10 - see the error messages...

  ERROR: DW071:

  ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\Bruce\AppData\Local\Temp\{A21F0230-5EE5-486F-8BF9-A1AAE040B907}\Photoshop_16_LS 20_win64\Adobe CC 2015\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  -------------------------------------------------------------------------------------

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Set to "Full control" permissions on the files of Adobe for all users in the following locations:
    • [System drive]: \Users\ [user name] \AppData\Local\
    • [System drive]: \Program Files (x 86) \Common Files\
  • Restart the computer.
  • Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Sheena

• Essbase security Migration to native mode for external authentication

  Hello!!
  
  I want advice on security setting, all users are currently in usermode native and Aboriginal groups.
  Now we want to migrate in external mode, the current version of hyperion is 11.1.1.3, the steps in
  that direction would be really useful.
  
  
  What is the best way of migration of the huge user base of native implementation for external authentication directory,
  It is the first step for the time of the native code for the external authentication, if anyone who did this will be useful.
  
  the installation procedure, maxl based migration will be useful or utility based.
  
  Thank you

  For services sharerd mode conversion to have a read of - http://download.oracle.com/docs/cd/E12825_01/epm.111/eashelp/sec_mode.htm

  To configure shared services to use an external directory have a reading of - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/frameset.htm?ch05.html

  For mass provision that you could use LCM or the utility CSSImportExport to export the provisioning of native users, update the file exported to include provisioning of users ad, then import them.
  LCM - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/launch.htm
  CSSImportExport utility - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch09s08.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Where is the Advanced mode and basis in the planning of the 11.2.3.000

  Hello.. I remember they were there in 11.1.1.3.000

  Concerning

  Which is more (much less), he went in the ADF mode conversion in 11.1.2.2

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• a matter of simple instruction trace

  Cannot find a definitive answer on this:

  1. the question of if the trace instructions are removed completely from the code during compilation with debug set to false or only o gauge is removed?

  2. If tracing instructions are not removed, then if the expression passed as the argument to the path is evaluated anyway?

  3. If the statements are not deleted, but the expression isn't evaluated using - define conditional compilation directive does not affect

  performance but can reduce the swf file.

  4. If statements are not deleted and the expression is evaluated, then - set the directive is certainly useful to reduce the size & improve

  performance.

  Thank you

  _Ilya

  Instruction trace will remain in the event code when the debug flag is set to false.  Debugging refers to the hooks in the code and break points.  I would use conditional compilation and place a directive to the compiler explicitly (-set = CONFIG::debug, true) before each trace log.  Trace is evaluated unless you use a compiler argument to remove tracing instructions.

  CONFIG::debug { trace("IN DEBUG MODE"); }
  

  It is an option as well (I use is in conjunction with the - describe above rather than to comment on which is very convenient to the Ant builds and cleaner code).

  http://www.pmko.NET/Flex/removing-trace-statements-from-Flex-applications#more-142

  I hope this helps!

  Best,

  J. Phillip Camp

• utility of good film work, but it is easily unpack by some site

  I created pl/sql code and wrap it using
  
  Wrap iname = <>oname = <>
  
  create or replace PROCEDURE ANK
  AS
  BEGIN
  DBMS_OUTPUT. PUT_LINE ('ANKUSH');
  ANK END;
  /
  
  After packaging
  
  create or replace
  Wrapped procedure ANK
  A000000
  1
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  ABCD
  7
  41 79
  0Wapaz + CAvwOUlJdBxIX8yvr9hMwg5nnm7 + fMr2ywFy40k4ruHSLwMAy/tKGCbhSm7JK/iiy
  veeysx0GMCyuJOqyMg7sUHAoMi720eokH8jL9jmm2vAvcg is
  /
  
  but it is easily conducted by the site http://www.codecrete.net/UnwrapIt/
  
  Another method to wrap the code pl/sql in oracle.
  Oracle says in docs code pl/sql wrap is not unpack readable mode again.
  
  Published by: DBA007 on April 24, 2012 05:44

  There is no other method to hide the PL/SQL, don't.

  The particular example you posted is not particularly representative of what packaging code and unwrapping is likely to produce. If you really have a business logic that is also exclusive to packaging, you will have a lot of names of variables and various complex manipulations with comments. The unpacked code will have variable placeholder names, comments will be missing, etc., which will make the code much less readable.

  Whatever the language, however, if a computer can run the code, it is possible to write a program to reverse the executable code in the valid source code. Just as you can decompile a Windows .exe in the C source code or reverse a .class compiled into a Java source file, you can reverse a PL/SQL block wrapped in PL/SQL source code. You will lose information along the way - the names of variables, comments, etc. - but the end result will be a valid source.

  Justin

• help with tkprof

  I try to visualize the sql_trace, but I get this message
  
  C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
  
  SQL > select b.username, c.value | '\' || Lower (d.value) | "_ora_" |
  2 to_char (a.spid, 'fm00000'). '.trc' "TRACE_FILE.
  3 v $ process a, v$ session b, v$ parameter, parameter c of $ v d
  4 where a.addr = b.paddr
  5 and c.nom = 'user_dump_dest.
  6 and d.name = "db_name".
  7 and b.username is not null;
  
  USERNAME
  ------------------------------
  TRACE_FILE ARGUMENT
  ------------------------------------------------------------------------
  
  SCOTT
  C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP\xe_ora_03008.TRC
  
  
  SQL > C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP > xe_ora_03008.trc output.txt
  SP2-0023: String not found.
  
  Someone knows why?
  
  Thanks in advance

  good boss. Hope your track session

  Try using this procedure below to draw a particular session of a schema

  (1) sqlplus system/system@orcl
  (2) check the sid and serial of the session of the session of v$

  Use the following query to see what session to draw

  SQL > select username, to_char (logon_time,' MY - DD - YYYY HH) session $ v where username ='' order of logon_time;

  SQL > exec sys.dbms_system.set_sql_trace_in_session(sid,serial#,TRUE);
  (3) now run the report/transaction.
  (4) once the activity is completed

  SQL > exec sys.dbms_system.set_sql_trace_in_session (sid, serial, FALSE);
  (5) now the trace file will be available in the folder database udump
  The track will be available in $oracle_home/admin/orcl/udump
  (6) to find the name of the use of trace files the following query

  Select spid in process $ v where addr = (select paddr in session $ v where sid =);

  This will give the name of the file
  If you are not able to identify the trace file, then delete all the files in udump before you start the trace.
  (7) copy the trace on your local pc and run the command of tkprof

  TKPROF D:\trace.txt explain = sort (prsela, exeela, fchela) = Oracle user and password (user application) name

  This will give a trace in readable format file (you must have the oracle on your pc for tkprof client work)

• I want to reinstall XP on drive C by using the recovery CD (D leave intact)

  I had Toshiba install a new hard drive with 40GBonto my 300 X 4 satellite. This was divided into drive C with 15 GB for windows and software and drive D with 25 GB of data. For some reason 'it cannot find the operating system', so I want to reinstall it. I know that I have the option 2 in recovery utility... but then I'm REALLY LOST... can someone take me through what I should do next?

  Thanks in advance...

  Oliver

  Hello

  As you say in your ad that you will need the second option on the called Recovery Expert mode Toshiba Recovery CD

  Expert mode allows you to choose the partition where the OS is to be installed.

  I've found this useful Toshiba FAQ document on the Expert mode recovery procedure.
  Please check:

  The Recovery process includes two procedures. 'Whole hard drive recovery' and 'Recovery Expert Mode'. What is the best way to run the "Recovery Expert mode'? http://support.toshiba-tro.de/KB0/FAQ350072001GR01.htm

  Good bye

• Qosmio G20-118: System start slowly - restore?

  Hi guys,.

  1 day to another, start windows on my G20-118 has become slower. Windows starts as usual, but all programs related to communication take 2 minutes to start until I can connect to the internet. If I open IE in the meantime it is not yet available for dial-up dialog box until the rest is responsible. Clues?

  I thought about restoring the system but would like to avoid it if possible. If I restore it, however, it will clean completely the two hard disks or can I save files in one of them?

  Thanks for your help.
  Pedro

  Hello

  There are many reasons why the operating system becomes slow.
  Sometimes if many background process runs on the entire operating system then BONES need a bit more to run applications.
  Also a virus or antivirus programs that are running on the operating system could cause such slow performance.
  But as you said earlier that the new installation of the OS could solve these problems.
  If you have 2 partitions on the HARD disk, so all that you back up important files on the second partition, and only the first partition is removed during the installation of the new operating system.
  On the recovery CD, you will find 2 options for recovery.
  Standard and expert mode.

  In expert mode, you can choose the partition where the OS is to be installed.
  Use the 'advanced search' to search for topics on the expert mode recovery procedure

  Good bye

• Just got the new computer but did get no o/s. How to install win 7. ??

  Cannot start Windows 7 grid on the new Lenovo ideacenter computer Q180. Screen says something about freedos and freecom. I just got the C:\ >. Have you tried pressing f8 and f5 are mentioned, but? HELP please. The computer has not not any software windows at all I know. She finished «Press f8 for trace, or f5 mode to work around \autoexec.bat...»

  Complete gibberish to me!

  Anyone got the answers?

  Thank you, Tony

  You say that this computer is new, so it will be under warranty.  If it has never been able to start, I take it back to the place I bought it and tell them that they sold you a defective computer.  They must either fix it or replace it free of charge.  Alternatively, you can contact Lenovo to see if they can help.  New computers should not have these problems.  There's probably a way to restore it to factory settings, but methods differ from one to the other, so you can probably find that on the web site of Lenovo.

  I hope this helps.  Good luck.