1242 AP of Standalone LWAP mode conversion
Hello GS.
Can you please tell me how to convert 1242 autonomous access point / infrastructure mode LWAP mode.
I'm not able to intergrate with my 2100 controller.
Ap1242 details below: -.
DH_3750_SWITCH_STACK #sh cdp nei fa 3/0/21 in detail
-------------------------
Device ID: ap
Workshop / entry:
IP address: 10.120.249.3
Platform: cisco AIR-AP1242AG-E-K9, capacity: Trans-pont IGMP
Interface: FastEthernet3/0/21, ID of Port (outgoing port): FastEthernet0
Hold time: s 129
Version:
Cisco IOS software, software of C1240 (C1240-K9W7-M), Version 12.3 (8) JEA2, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Wednesday 17 July 07 23:02 by CCIC
Thank you
Mirza.
Hi Mirza,
You have two options.
One, amounted to autonomous and re-return to LWAPP.
Two, the command is "disabled" because you're already using LWAPP image. Your LWAP contains two IOS images: it has the prefix "RRs" and the other is the image downloaded from the WLC. Delete this image, let the AP boot image "RRs" and run the command again.
Tags: Cisco Wireless
Similar Questions
-
APs 1242AG LWAPP mode conversion problem
Hello
I have a few APs 1242AG to convert standalone in LWAPP mode. The conversion tool (v 3.4) keeps giving me an error saying that there is a list of firewall or preventing work TFTP access.
It is this time I use the internal TFTP server in the tool or TFTPD32 on the same PC or even if I leave the picture in TFTPD of flash on the 2960 POE switch I test the upgrade on the access point is connected to!
If do it manually one ' archive download-sw / overwrite/no-set-boot tftp: / /... ". "since the console telnet on the same access point, it downloads the image very well. I can also copy the config for my TFTP server!
It's driving me crazy ideas that I hurt APs to LWAPP mode.
Oh the WLC is a race 5508 latest 7.x code, but I don't think that's relevant here.
Concerning
Pat
Hi Pat,
It's just a warning msg.
Thank you
-
Mode conversion controller in stand-alone mode in cisco 1702
I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.
Run this command to convert:
# swarm - Standalone mode
# reloadI found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...
Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...
and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...
Here are the files I'm looking for?
Help, please.
This original link can cause a headache for an Aruba AP which is different.
Try this method:
The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).
This second link is light which means the controller-based and you don't want that for this scenario.
See you soon,.
Ric
-
Color test Acrobat DC - no output mode conversion
Hi I have a PFD I want to convert colors to a specific color profile Acrobat DC but the output mode is not in use - is it because I'm using an Acrobat of the trial?
Thanks for your report.
The option mentioned by you in the screenshot, for the output mode, in the first place will be not be enabled for files that don't contain any output mode . Please check the PDF file contains a.
Reference: using Acrobat | Conversion and ink colors (Acrobat Pro DC) management
PDF files that don't conform to standards such as PDF / X or PDf/A, often lack an output mode.)
To verify that your file contains an output mode, please check PDF / X using the before the flight-> select check compliance with PDF/X-1-> Analyze.
Thank you.
-
Hi all
I need to convert a "AIR-LAP1242AG-E-K9" autonomous access point.
I tried these steps to convert the LWAP in stand-alone.
1 assigned IP 10.0.0.3 address to my laptop
2. place the IOS image in the cisco TFTP server "c1240-k9w7 - tar.default.
3 disabled all firewall on my laptop
4 cut the AP and pressed the reset button and started with the AP and released the button reset after 40 seconds
5 TFTP showed the attached error
Please let me know how can I convert the stand-alone LWAP. I need to do as soon as POSSIBLE.
Make sure that you PC works on your TFTP server is set to show extensions of known files. If not even after you rename the image file that the .tar extension is still there, just hidden.
-
I need help with the problem.
The customer needs to put out of the LED. because it is installed in the hotel room.
Interference LED blinks the eyes to sleep.
I need to know the command line to disable autonomous LED of AP mode in the version of the firmware. 15.x.x
Is it possible?
help me T - T
Thank you
Phong
Do not have this AP, but have you tried this:
config t
LED display off
Scott
-
Trace fle readable mode conversion procedure
Hi all
Converting readable error trace file below shows,
pleasd help on this same
I got below error:
C:\ > tkprof dev300_ora_8614044.trc narendra.txt
TKPROF: Release 9.0.1.5.1 - Production Thursday, May 17, 15:11:46 2012
(c) Copyright 2001 Oracle Corporation. All rights reserved.
could not open trace file dev300_ora_8614044.trc
C:\ >
Thanks in advance,
NarendraAre you sure you're in the right directory and you have access to the file?
It is highly unlikely for the trc file in the c:\ directory.Follow these steps to get the correct location
Select * parameter of $ v where name like '% user_dump_dest % '.
Go to the right directory and then run your command.
For the syntax of tkprof, see http://www.orafaq.com/wiki/TKProf
Sandeep Gandhi
-
need urgent help with AIR - LAP - 1242 G-E-K9
Hi all
IM new in the Cisco wireless. I have a Cisco AIR-LAP1242G-E-K9... I don't WLC, I want to use it as standalone AP for wireless access to my users... I took the AP console & got the following msgs!
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
* 00:18:55.021 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
Not in a bound State.
* 00:19:05.651 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 172.10.10.16, mask 255.255.255.0, hostname AP68ef.bde3.3ad4* 00:19:10.524 Mar 1: % 3-CAPWAP-ERRORLOG: white event 29 & combination State 4.
* 00:19:10.524 Mar 1: % 3-CAPWAP-ERRORLOG: SM Manager: failed to process the message of the timer.
* 00:19:10.524 Mar 1: % CAPWAP-3-Journal of ERRORS: do not handle the message from the timer.
* 00:19:10.525 Mar 1: % CAPWAP-3-Journal of ERROR: failed to process the message of the timer.
* 00:19:10.525 Mar 1: % 3-CAPWAP-ERRORLOG: Discovery interval timer Manager time-out failure.
* 00:19:10.587 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 1 Mar 00:19:10.587: bsnInitRcbSlot: slot 1 has NO radio
* 00:19:10.595 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 00:19:10.608 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 00:19:10.609 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:19:12.606 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.Translate "CISCO-LWAPP-CONTROLLER"... the domain server (255.255.255.255)
* 00:19:21.607 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER* 00:19:30.608 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
* 00:20:20.614 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
Not in a bound State.
* 00:20:31.244 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 172.10.10.17, mask 255.255.255.0, hostname AP68ef.bde3.3ad4* 00:20:36.117 Mar 1: % 3-CAPWAP-ERRORLOG: white event 29 & combination State 4.
* 00:20:36.117 Mar 1: % 3-CAPWAP-ERRORLOG: SM Manager: failed to process the message of the timer.
* 00:20:36.118 Mar 1: % CAPWAP-3-Journal of ERRORS: do not handle the message from the timer.
* 00:20:36.118 Mar 1: % CAPWAP-3-Journal of ERROR: failed to process the message of the timer.
* 00:20:36.118 Mar 1: % 3-CAPWAP-ERRORLOG: Discovery interval timer Manager time-out failure.
* 00:20:36.183 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 1 Mar 00:20:36.183: bsnInitRcbSlot: slot 1 has NO radio
* 00:20:36.190 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 00:20:36.203 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 00:20:36.204 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:20:38.202 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.Due to frequent changes in intellectual property, I can't make the console AP...
Can any body tell me what is the problem & solution... & it will be appreciated if any body share the basic configuration guide
Thanks in advance &
Please answer as soon as POSSIBLE...i want to use it as standalone AP for wireless Access to my users
Me bad. Let me explain. You need a PA running an IOS (aka autonomous) autonomous.
*Mar 1 00:18:55.021: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
-
Where is the Advanced mode and basis in the planning of the 11.2.3.000
Hello.. I remember they were there in 11.1.1.3.000
Concerning
Which is more (much less), he went in the ADF mode conversion in 11.1.2.2
See you soon
John
-
VMWare Converter Standalone 4.1
Is there a download for Standalone Converter 4.1 VMWare? Will they have a?
Thanks in advance.
AFAIK the vcenter for Converter plugin will die soon - so there must be a new Standalone version soon - (and maybe in a few years we will know
Check yourself
VMware vSphere 4.1 is the latest major version of VMware vCenter Converter plugin. VMware will continue to provide technical support for vCenter Converter to the end of its support life cycle. VMware will continue to update and support the product free vCenter Converter Standalone, which allows conversions from sources such as physical machines, machine formats virtual VMware and Microsoft and some third-party disk image formats.
of http://www.vmware.com/support/vsphere4/doc/vsp_vcc_42_rel_notes.html
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Essbase security Migration to native mode for external authentication
Hello!!
I want advice on security setting, all users are currently in usermode native and Aboriginal groups.
Now we want to migrate in external mode, the current version of hyperion is 11.1.1.3, the steps in
that direction would be really useful.
What is the best way of migration of the huge user base of native implementation for external authentication directory,
It is the first step for the time of the native code for the external authentication, if anyone who did this will be useful.
the installation procedure, maxl based migration will be useful or utility based.
Thank youFor services sharerd mode conversion to have a read of - http://download.oracle.com/docs/cd/E12825_01/epm.111/eashelp/sec_mode.htm
To configure shared services to use an external directory have a reading of - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/frameset.htm?ch05.html
For mass provision that you could use LCM or the utility CSSImportExport to export the provisioning of native users, update the file exported to include provisioning of users ad, then import them.
LCM - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/launch.htm
CSSImportExport utility - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch09s08.htmlSee you soon
John
http://John-Goodwin.blogspot.com/ -
Light wireless Cisco to Converion autonomous on AP Cisco2600/2700
Dear team,
I have these two Access Points "AIR-CAP2702I-C-K9" and "AIR-CAP2602I-C-k9" and I need to convert them into Standalone/autonome Mode. Please let me know if it supports the conversion of light weight in standalone Mode?
Is there any document detailing the same for Cisco 2602I/2702I Access Point?
Kind regards
Farhan.Please let me know if it supports the conversion of light weight in standalone Mode?
Yes, stand-alone mode is supported.
Is there any document detailing the same for Cisco 2602I/2702I Access Point?
By using a TFTP server to revert to a previous version
-
Hi netpro,.
I'm having some trouble trying to get a new 2702i to convert standalone / autonomous mode.
I did what most of the articles say you should do. First SSH into AP, have it search the ios file that needs to be renamed to .default. (full name: ap3g2-k9w8 - tar.default)
What is happening is that the AP starts shooting the TFTP and then restarts. However when it restarts I can't ssh in the AP.
In my view, he pulls the same IP address or a different IP address, but I can't ssh or get webaccess in the Console AP. does not work either. I use a USB cable to the console that I know works. Here's the log to download the new file from the tftp
APf8c2.88bc.75fc #archive download-sw/force-reload / crush tftp://192.168.1.147/ap3g2-k9w8-tar.default
looking at the picture...
Loading of the ap3g2-k9w8 - tar.default of 192.168.1.147 (via BVI1):!
extracting information (286 bytes)
Image info:
Version suffix: k9w8-. 152 - 4.JB5
Image name: ap3g2-k9w8 - mx.152 - 4.JB5
The release directory: ap3g2-k9w8 - mx.152 - 4.JB5
The iOS Image size: 215552
Total image size: 13701632
Image device: Wireless LAN | LWAPP
Family pictures: AP3G2
Wireless switch management Version: 7.6.100.0
Extraction of the files...
ap3g2-k9w8-MX.152-4.JB5/ (directory) 0 (bytes)
extraction of ap3g2-k9w8-mx.152-4.JB5/ap3g2-k9w8-mx.152-4.JB5 (208427 bytes)
extraction of ap3g2-k9w8-mx.152-4.JB5/ap3g2-k9w8-tx.152-4.JB5 (73 bytes)
ap3g2-k9w8-MX.152-4.JB5/HTML/ (directory) 0 (bytes)
ap3g2-k9w8-MX.152-4.JB5/HTML/level/ (directory) 0 (bytes)
ap3g2-k9w8-MX.152-4.JB5/HTML/level/1/ (directory) 0 (bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/appsui.js (563 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/back.shtml (512 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/forms.js (20125 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/sitewide.js (17089 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/config.js (26330 bytes)!
extraction of ap3g2-k9w8-mx.152-4.JB5/html/level/1/officeExtendap.css (41801 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/ap_home.shtml.gz (1297 bytes)
ap3g2-k9w8-MX.152-4.JB5/HTML/level/1/images/ (directory) 0 (bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/images/background_web41.jpg (732 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/images/cisco-logo-2007.gif (1648 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/images/info.gif (399 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/1/images/login_homeap.gif (19671 bytes)
ap3g2-k9w8-MX.152-4.JB5/HTML/level/15/ (directory) 0 (bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapBanner.htm (7114 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapConfig.shtml.gz (2864 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapEvent.shtml.gz (988 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapHelp.htm (5013 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapMain.shtml.gz (3350 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/html/level/15/officeExtendapSummary.htm (718 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/ap3g2-k9w8-xx.152-4.JB5 (12061500 bytes). ! O!!!!!!!!!!!!!!!!. OO!!!!!!!!!!!!.! O !!! !!!!!!.! O!!!!!!!!. O!
extraction of ap3g2-k9w8-mx.152-4.JB5/8004.img (554707 bytes).
extraction ap3g2-k9w8-mx.152-4.JB5/E2.bin (18656 bytes)!
extraction ap3g2-k9w8-mx.152-4.JB5/E5.bin (1816 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/X2.bin (15158 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/X5.bin (1519 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/V2.bin (12826 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/V5.bin (525 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/R2.bin (9328 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/R5.bin (3406 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/Q2.bin (5830 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/Q5.bin (2790 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/C2.bin (19822 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/C5.bin (6936 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/F2.bin (13992 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/F5.bin (3662 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/U2.bin (6996 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/U5.bin (3048 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/B2.bin (9328 bytes)
extraction of ap3g2-k9w8-mx.152-4.JB5/B5.bin (1980 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/Y2.bin (5830 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/Y5.bin (1544 bytes)
ap3g2-k9w8-mx.152-4.JB5/8006.img extraction (544404 bytes)!
extraction ap3g2-k9w8-mx.152-4.JB5/info (286 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/file_hashes (6353 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/final_hash (141 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/img_sign_rel.cert (1375 bytes)
extraction ap3g2-k9w8-mx.152-4.JB5/img_sign_rel_sha2.cert (1371 bytes)
extraction info.ver (286 bytes)
[OK - 13721600 bytes]Removal of target version: flash:/ap3g2-k9w8-mx.152-4.JB5...done.
New image of the software installed in flash:/ap3g2-k9w8-mx.152-4.JB5
System configuration to use the new image... done.
Asked the current charging system...Any help would be appreciated!
Hello
Be aware that the independent IOS for the 2700 has limited features. Since the 2700 is a novelty, the standalone IOS is wireless site-only for investigation. It is not intended to serve the customers as of yet.
You check out image ap3g2-k9w8 - tar.default starting from tftp, and such image is not just convert to standalone.
(k9w7 is a stand-alone Image), you need to download this image.
http://rscciew.WordPress.com/2014/01/04/understand-access-point-iOS-images/
http://rscciew.WordPress.com/2014/05/07/access-point-conversion-lap-to-a...
Concerning
Remember messages useful rates
-
connect the PC to the dedicated access point
Hello
Is in the WLAN network as two configured SSID, one for a printers and another for a PC. It is possible to ping the printer form LAN but not PC WLAN. It is not the ACL set. Is no chance of routing between WLAN on WLC? The firewall is a layer 3 device in the network.
The controller is 2112 with 7.0.98 version of the software and all APs are in local mode. The network is flat with 16 bit mask.
The second problem is that on the Wi - Fi network that precedes some AP (1231) are converted to standalone AP mode LAP.
The network has been added to an another TOWER 1242 with external antenna.
A PC with WI - Fi wants to connect to the new TOWER even has a bad signal.
1231 model has only one external antenna and is closer than 1242.
How do to impose this PC is always connect to 1231, is possible to configure on WLC?Kamil
Hi Kelly,
1) check on the 'blocking of the peer to peer' option on the configuration of your SSID. You want to disable.
(2) the customer himself decides where it wants to connect. If she's stupid drivers that make it to connect to an access point not 'best' you can not do much.
Only things you can do:
-updated client drivers
-enable or disable the load balancing across WLC. There is no best setting. Basically load balancing prevents clients to connect to APs that are already occupied. So, if it is currently enabled, maybe your AP 1230 is occupied?
Nicolas
===
Please note the answers that will help you
-
Im trying to convert a windows sbs 2003 using the last standalone converter, Im conversion using this local computer and the conversion of a computer of esx. the task completes without error. However, when I go to start the virtual machine it says its powerd with problem but with the console open he'll never even to windows startup screen is just a black box with a cursor blinking and that is as far as it goes. .. I tried a couple times and is always the same. Please give some ideas to go. I don't see even a mistake to offer.
Mark
Install the Converter 3.0.3 on the SBS server.
Then start in AD restore mode (to make sure that AD is stopped).
Then run the converter.
André
Maybe you are looking for
-
How can I unlock my phone I have remember the password
How can I unlock my cell. ? I forgot my password
-
Keyboard and mouse does not work / computer does not start
I have a HP Pavilion a6403w that my daughter uses to the school. One day, the computer stopped boot-up. I get to the blue screen to choose (F10 = Setup) ect... The only key that seems to work at all is the F-10. If I press it, the computer responds b
-
Satellite A200-1 s 5 - can I use a 3G card?
Can I use a 3G controller PCI Express Mini card in this model?
-
What I do: I have LabVIEW 2011. I create several random number generated XY plots. I created annotations to show the most distant point in each plot. What is going on: When the last points in each plot are close, the names and the arrows overlap. I w
-
Windows is completely up to date through the date of this post. OverDrive Media Console-MP3 download and play perfectly-Download error 0xC00D2751 for all WMA files (~ 80% of audio book from the library files are downloadable in this format), informin