Traces, inexplicably change the angular elliptic in Ultiboard hand routing

Similar Questions

• change the network name on my wireless router?

  A few months ago, I bought my linksys router and did the installation of all the stuff that day, including changing the name of the default network. I want to change the name to something different, but when I went to the address of the facility, there was no box to put the new network name [I was on standard wireless settings tab in the wireless section]. Help please?

  [Yay that worked, thank you:]

• Changing the cursor for a helping hand in the text and you cannot change the sentence or paragraphs in boxes to listen audio mode

  In Acrobat Reader if you're going to see menu and scroll all the way to ' Read out Loud ' and activate it, you can listen to the texts.  And you can also take the blinking cursor and click on the sentence or paragraph and a box turns around the sentence or paragraph and reads within the selected text.  But in Acrobat DC the cursor flashing in the text box has changed to a f * k * g hand grabber and you stop to select whatever it is!  How can we change back the hand f * k * grabber g in a cursor blinking so I can choose the text I want to listen or to highlight or mark?  Can someone help me on this?

  Hi dales45194090,

  You can change the options to use Select or hand tool under Edit > Preferences > General

  Also, if you have selected "use keys.. accelerators" option, then you can simply press V as the shortcut key for the selection tool.

  

  Kind regards

  Ana Maria

• How to change the cursor in a helping hand when on a Button component?

  I added a button in the Menu components.  When I rollover the button, it changes color slightly, but I would also like the cursor to turn to the traditional hand.  I tried buttonMode = true and that doesn't seem to work.

  Does anyone have any suggestions?

  Thank you.

  Dave

  buttonInstanceName.useHandCursor = true;

• Difficult to change the width of talk about thermal discharge in Ultiboard

  I'm trying to change the width of talking thermal relief of various buffers on an existing Ultiboard layout done with an earlier version, and that they do not change. Can I change the "type" for x or +, etc. but not the width of the shelves.  Is there some global setting prevent this? That means "use the polygon settings' when you set the type, and how will this affect the width talking thermal relief? I see nothing in the help file. I also searched help and the user manual for what happens if I select Auto for width, but I can't find any instructions on what it means.

  I was able to confirm the behavior you're seeing where the width of the rays is limited by the width of the measurement of the surface of the coppe / diet plan. It is certainly not intentional and I produced it for R & D to address a defect report. I am very sorry for the inconvenience that was done to you.

  There are no files attached on your post so I can't confirm your actual designs. Please let me know if the workaround solution (to adjust the width of the measure) will allow you to get the results you're looking for, despite the incorrect behavior.

  Jeff

• Generate the trace for another session file and change the path

  Hello

  Please let me know how to configure tracing for another session and it is also possible that the trace file can be re-directed to another path than the default path user_dump_dest?

  Kind regards

  VN

  Use DBMS_MONITOR. SESSION_TRACE_ENABLE (and SESSION_TRACE_DISABLE).

  as far as I know, you cannot change the default location of the trace file.

  In a session, you can change its path filename with ALTER SESSION SET TRACEFILE_IDENTIFIER = "";

  Hemant K Collette

• How can I change the font size on my tab headings and bookmarks menu? The fonts have inexplicably increased in size and I can't find an option to change them.

  Without any evident input from any of the users on my PC, the police in my topics tab, field toolbar and bookmark URL has increased. I can't find any options to make them smaller. I changed the font for my content page and main menu but I'm stuck with large large fonts out of proportion to the securities tab, toolbar field and bookmarks URLs.

  RanchInNevada

  Try to use this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/theme-font-size-changer/

• ESXi 4.1 change the selection of trace on data warehouses

  ESXi 4.1, I have a couple of data warehouses that were not configured correctly. The selection of the path is set to fixed, while the other data stores have alternate-control storage IO. I'm looking for the less risky/disruptive way to change the configuration of these data stores. There are 15 ESX hosts.

  When to change the configuration of the data store is all for example conditions pre move VMs in another data store, stop the virtual machines etc.. Y at - it any disturbance to the ESX host?

  Hello

  Changing paths is not disruptive and can be done online, as long as takes care of the storage and SAN network is in good health.

  Validate it seems that some are on Round Robin and I presume that it is on the same storage array.

  You can do this by running a PowerCli script to modify the path selection: Home

  I don't have the scrip to activate SOIC

  Concerning

  Please allow points to useful/correct answers

• Cannot change the metadata

  iTunes 12.3.2.35

  MacBook Pro 13 inch Mid 2014 retina

  V OS X El Capitan 10.11.2

  I recently moved my iTunes library to a new NAS drive.

  I can see all of my music library, however I can not change the metadata all the more lost all my album art and also a few compilation albums are more contained in the same album.

  I tried to find answers on the internet, but have had no luck yet.

  And help greatly appreciated!

  Thank you

  Chris.

  I'll add this to my list 'embarrassing problems that there are good reasons not to use a NAS with iTunes.  There are many other positions with the SIN issues that are all also inexplicable.

  Lose the work suggests to me that you did not move correctly from the library. How did you do?  Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.

• Designjet 500: error 81:01 continues after changing the sensor roller encoder

  OK, as described in the title, I started to conspire problems some time previously, I invetigated one error 81:01 a problem with the sensor roller encoder, I disassembled the plotter past the sensor and I worked for a few months. Now the error is back, so I decided to change the sensor for a new, but the 81:01 error continues.

  A few times the plotter says has a paper jam and sometimes, paper begins to roll and dosnt stop.

  Can someone help me with this?

  OK, the problem was solved by changing the roller encoder sensor, I described in the title, after this error persists, l I demonstrate the tracer again and the stop error after I cleaned the optical sensor of the encoder to roll in the car. So that's been the problem, I hope this can help someone.

  (Sorry for English)

• Can I change the descriptions of training?

  Is it possible to change the descriptions of training for Apple Watch? I never use the elliptical trainer or rower so I would have something that best fits my activity.

  Thank you!

  Hi Rebecca

  It is not currently possible.

  The types of training activities are also used to help your watch choose which sensors will be better and accurately to track and evaluate the results of your workout (for example the built-in accelerometer, built-in heart rate monitor, your paired iPhone data).

  If you want to suggest that Apple consider adding other types of activity in the application of the workout, you can do it here:

  https://www.Apple.com/feedback/watch.html

• Cannot change the solder mask

  I want to erase a. 125 "wide strip the solder mask of ground plane on top of a circuit board in order to facilitate the soldering of a vertical metal shielding of the aircraft, but Ultiboard does not seem to allow this modification of the solder mask lind. Is there a work around?

  Thank you very much

  Hello

  Simply place a line on the soldermask layer. You can change the coordinates and widths on your needs. Welding layer mask is a negative layer in Ultiboard. Forms in the solder mask layer denote this solder mask must be set aside (or deleted) in this area. If there is no form in an area on the layer of soldermask, it is implied that physical solder mask will be applied during Assembly.

  If your Council Home supports a separate layer mask stick, you should double in the Sub solder with paste mask soldered to facilitate Assembly.

  Hope that helps.

• Change the frequency AO AO DC voltage scanning scan?

  Hi all

  I am very new to labview, but find the forums and examples extremely helpful. I probably spend 50 + hours to familiarize myself with tutorials and general information, but I am at a point where I need your help.

  I'm unable to change the example "AO frequency sweep" found here (see custom_sweep_1.VI) to allow me to sweep the voltage.  My instinct is that I don't need of the ' waveform buffer generation VI ' and that I should be able to remove the associated entries since I'm only interested in a sweep of DC voltage. It is also called create_log_frequencies.VI, and I'm fairly certain that I can use it as written and simply change "frequency", "tension". My work of the custom_sweep_1 changes are attached as custom_sweep_Voltage.

  The problems I am having with the edition of custom_sweep_1 are:

  (1) I don't think I understand very well how or if the parameters associated with waveform buffer generation VI relate to a sweep of DC voltage.

  (2) an extension of 1): the loop depends on the samples and Cycles by buffer and I don't know how / whether to replace these values

  (3) the .VI DAQmx Timing (sample clock) receives its sampling frequency of output waveform buffer generation VI, but I think I can use 1/scan time to replace this (?)

  (4) the DAQmx Write.VI gets waveform buffer generation data, but if I can get around this VI and AO tension of wire directly to write DAQmx then I think I can use minimum voltage as my entry of data (?)

  (5) after the implementation of these changes, the custom_sweep_Voltage runs, but I get error 200609:

  "The possible reasons:

  Generation cannot be started because the size of the selected buffer is too small.

  Increase the size of the buffer.

  Choose the size of the buffer: 1
  Minimum required buffer size: 2

  "Task name: _unnamedTask<3A>"

  I also note that I tried other ways to create the sweep of voltage DC VI:

  (1) I have tried change the tracer IV example (found here), but it's much more confused than change the frequency sweep.

  ( This tutorial and sample 2) block diagram looks like straighforward, and I also work on understanding what Assistants DAQ 1,2, 3.

  Any return would be great. I think it is clear that at the very least, my poor understanding of 'buffer' is if the cause of my confusion about the change of frequency scan, please do not hesitate to share any information you have.

  Thank you very much for the help,

  -Esperanza

  Additional information on my project/progress using labview follows below:

  My final goal is to determine whether or not the resistivity of a sample of organic driver changes over time. For this I want to compose a VI simultaneously sweeping the output voltage DC-5 to 5V periodically during 24 hours and measure the voltage drops to my load resistance (to determine the current in the circuit) and the sample. I use a USB 6259 DAQmx and that you have correctly configured my circuit. I work two screws that I created with the DAQ assistant and by changing some of the examples, I found online. Output voltage (of an AO) but I have to manually select the voltage value. The second reads voltages in three samples of interest and writes the data to a PDM file. If you've read this extreme sensation and still make a contribution, my next goal after finding how to sweep the voltage is to combine this with my VI measure VI. I think it will be relatively simple, but still, I rejoice in all your comments!

  I solved this problem. I have changed my approach to be similar to the last link in my post. AO frequency scan approach is much more complicated that I need. Thanks for the help.

  -Esperanza

• sampling time changed the buckle timed

  Hello world

  I use the timed loop to control the DC motor with the vi of PID. in the loop and the sampling time are defined as 0.01 s. However, after I added a few other screws in the loop, for example, writing of measure file.vi, to collect the errors between the angle and the practical perspective of the engine for the time histroty the movement of the motor, we find that the sampling time changed, not always 0.01 s before the vi has been added, but 0.01 or 0.02 s. the entire program desinged to be fininshed with 7 s, now's done it at 9.4 s, that is, execution of the loop time is extended.

  Another thing is, if the sampling time is defined as s 0.05, the sampling time is always 0.05 s and the execution time of the loop is always 7 s as predined, regardless of writing custom file.vi is added in the loop or not.

  As a result, I think that if the complexity of the loop is incresead and time of sampling sets is small, then the actual sampling time will be modified due to the design of things load in the timed loop. What is the reason? If so, are there methods to solve?

  It is important: the collection of the angular error of the engine in the time histrory is very important, which will be used to show the correctness of the settings KP, KI and KD.

  A friend suggested using the queue vi, but I don't really know how to use them. Can someone give some instructions?

  Thanks a lot!

  See you soon

  Cram features in a timed loop is like stuffing 5 books you know that in a book bag 3. The timed loop is only really practical on a rt system, but even in this case, if the code inside requires more time than the period of the loop, there is no magic that the loop can do to increase the execution time. Just point out you that the loop is late. The solution is to remove features from the inside of the loop. Writing to a file of measure is one of the worst if you write to a text file. Look at the producer/consumer model of design that you have examples of. There, you will have a normal loop that you will write to a queue, and a second loop will process data in the queue. Use file > open...

• How a single change of ownership of XY Graph Plot.Style default or change the properties od individual plots?

  I have a XY Chart with a variable number (known) of several plots. The number of plots may vary, the style of track sometimes isn't what I want. I am trying to use a property node in a loop for change the properties Plot.LineStyle, Plot.PointStyle, and Plot.Fill/PtColor for each parcel in a XY Chart. However, perhaps because the names aren't static, colors do not seem to be updated I would, and I'm really not sure why this happens. Strangely, the LineStyle and PointStyle seem to be updated as I'd like.

  Please see the ScatterColors.zip enclosure that contains the main VI in question (SplitInGroupsScatterByOrder.vi) and two screws under which it depends. Thanks in advance for your help

  So, I thought about it for me. I did the stupid mistake to think that the 'Name of the conspiracy' property was a reference, to select, by parcel name, field properties, which were being changed. Now, I understand that the "Tracer Active" property is the way to do that, while the Name property to draw allows (surprise, surprise) to change the name of a parcel.