Track file information

Similar Questions

• BlackBerry smartphones can not erase the music file information

  I have a problem loading music on my 8830.  I have a 4 GB memory card, but I can't figure out how to erase the music I deleted.

  Cancel the request.  I could restart the BB and delete the old file information.  Found a few old son who had the same problem.

• Adding disk space and Block Change Tracking file

  DB 11.2.0.4

  SunOS 5.10 operating system

  I get my SA to add space to the volume group that hosts the block change tracking file.  The disc can be disassembled.

  Has an impact on the file that needs to be disabled?  Disabling the block change tracking deletes the file.

  the ACE can be right, in some rare cases, the zfs must be dismounted. So in this case I recommend to disable and recreate the change tracking file.

  Is that the answer you need, or I could help you otherwise?

  Concerning

  Timo

• Adding file to a jpeg file information affects quality?

  If I add only some info file to a JPEG (no photo editing), it alters the quality of the picture? As if I put only in a description for the file of information on...  Photoshop will understand that I changed only the information about the file and not the photo itself?

  Added information about the file will not affect the quality of the jpeg, as long as you file > save it after you have added the info file. I recommend adding file information in Bridge so you don't have to save in Photoshop. Simply select the photo of Bridge, choose file > file Info, add your info and your done without affecting the quality.

• SQLEXEC on each new track file or simply on replicat begin to capture current FILESEQNO?

  Dear community,

  I need to capture fileseqno Treaty of the trail than replicate file. But I need to capture him once without overhead of adding column fileseqno to the target tables.

  I clearly understand that the use of colmap (usedefaults, FILESEQNO = @GETENV ('RECORD', 'FILESEQNO')) inserts the value of fileseqno for all records captured in newspapers, but what I want to accomplish is to react to the change number of fileseqno event while replicat is running.

  Logical extension of the application I have in fact just to capture the first trail, which is treated by replicat fileseqno.

  What I've tried so far is to use the following settings to replicate (given the two tables have to be replicated):

  table m.EventHead,
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no1.a_fileseqno, NULL ) or @coltest( set_first_seq_no1.a_fileseqno, MISSING ) or @coltest( set_first_seq_no1.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  table m.EventTail,
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no2.a_fileseqno, NULL ) or @coltest( set_first_seq_no2.a_fileseqno, MISSING ) or @coltest( set_first_seq_no2.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  
  

  pk_replication_accounting.set_first_seq_no is defined in the package as

  procedure set_first_seq_no( a_fileseqno in out pls_integer );
  
  

  With the filter clause, I tried to load GG for SQLEXEC only for the first record captured for each table, but without success. Stored procedure is shot several times on each record in the log file.

  As far I understand autonomous SQLEXEC is not able to get the value of @GETENV ("GGFILEHEADER", "FILESEQNO"), although I have not yet tried.

  Another way, what I see, is to instruct extract to add a record of false for each new track file and then to process within the card with SQLEXEC clause. For example, if SOURCEISTABLE had by effect of the table, then we could get our unique record for each trail using the double table:

  sourceistable
  table dual;
  
  

  I still don't know how to get the required behavior.

  Please help if you know workarounds.

  Has managed to capture the current fileseqno for each start to replicate with the following parameters:

  ignoreupdatebefores
  --
  map m.EventHead, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  --
  map m.EventTail, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  

  tmp_gg_dummy is defined as follows:

  create global temporary table gg.tmp_gg_dummy ( id number( 14, 0 ) ) on commit delete rows;
  
  alter table gg.tmp_gg_dummy add constraint tmp_gg_dummy_pk primary key ( id );
  /
  

  Procedure is triggered only once by each replicate early and report file displays the following text:

  From Table m.EventHead to GG.TMP_GG_DUMMY:
  
    Stored procedure set_first_seq_no1:
           attempts:         0
         successful:         0
  
  From Table m.EventTail to GG.TMP_GG_DUMMY:
         #                   inserts:         0
         #                   updates:         1
         #                   deletes:         0
         #                  discards:         0
  
    Stored procedure set_first_seq_no2:
           attempts:         1
         successful:         1
  

  Although mapping of origin of m.EventTail

  	#	Inserts:	69
  	#	updates:	21
  	#	before:	21
  	#	deletions:	0
  	#	Releases:	0

• Remove all file information

  Hello

  I need to send some of my photos to a photographer, but I DON'T want to see file information (how the photo was taken, iso, aperture value, temperature...)... .then I´d want to remove all the file information (EXIF data from the camera, and so on).

  How to do?

  Thank´s a lot

  I m using PS CS4.

  use file-> save for Web & devices and change the drop-down list of metadata

• Missing file information

  Have recently bought a new computer and trandferred my photos on 2nd HDD.  If I open a photo that was published on the old computer and go to files - Information - and then select historical it shows me all the actions that I took in editing this file (photo).  If I opened a new photo on this computer and perform the same actions edition and then go to file - | Information - and then select historical, it shows nothing.  I realized the two suggestions given to me by the Support from Adobe (by increasing the size of the history and the size of the cache), but it makes no difference.  Can anyone help?

  Kathleen

  You mean it doesn't look like this?

  

  Also you don't need to install all earlier versions, you must just available disks to be inserted when you are prompted.

• import MP3s into itunes but who wish to change file information when importing

  Hello

  Recently, I sold my coffee where I bought a whole bunch of music. All the music was played by a pioneering system that has been updated weekly with new songs. All different musicians or groups. Most of the songs where the most popular at that time, so albums never whole or complete, but mainly of independent numbers. Now, I want to import into Itunes (latest version). Problem is that I find myself with a list of many simple figures of individual bands. I can litterly scroll for 5 minutes before I'm at the bottom. Is there a way by Automator or Applescript to change the file to an mp3 information while I import into Itunes. In this case, I want to make a fixed name musicians and an albumname who goes to all the numbers. I think I can finish with a name and an album in which there are more than 6000 songs.

  I hope that I have explained in a way that you understand. I think there must be a solution by automator or applescript, but I can not find or make up. I'm sorry. I hope someone can help.

  cordially Gerwin

  Not that you import. There are a lot of scripts on the web site of Dougscripts edition of track information once it is in iTunes, or you can search by using a third party application such as MediaRage to edit outside of iTunes and then import.

• Regarding the change block track file...

  You have a question: (for the 10G database)
  
  The four statements about the track of changing block file are correct? (Click on four).
  
  The location of this file must be different from that of the database files.
  (B) the minimum size of this file is 10 MB.
  C. the maintenance of this file is fully automatic.
  D. The Oracle database files block change information in this file by default.
  E. the view BLOCK_CHANGE_TRACKING V$ contains the name and location of this file.
  F. the changed blocks are followed in this redo file is generated.
  Answer: B, C, E, F
  
  another answer is: GOS.
  
  so C and D, which is right?
  
  Thank you
  
  Published by: 795980 on December 8, 2010 14:37

  D is undoubtedly true... after that you are on your own.

• iTunes does not remember which track/file reading in an album

  I use v.12.4.1.6 on my desktop. I have a lot of audio books, most of which are divided into 2, 3 or more files. Whenever reading moves to the 2nd or subsequent file, and I stop listening and close iTunes, when I try to reread the book (?) once again, playback resumes the first file in the book (album).

  Is there some setting in which case I can get iTunes to remember which file of the book/album he played last?

  Note: iTunes has no problem remembering where he last was in the first file, or in the following files when they are selected individually.

  Paul.

  I don't think that there is no specifically, but there is a viable solution. It may seem complex, but it's not really!

  What you could do is set up a smart playlist, the value contain the audio files on this one 'book', but only if this file has not been played. What then, is the reading list would have all files (in iTunes, audiobook, the files are called chapters). You then play the playlist and once you play a chapter, it gets removed from the playlist, leaving those that you have not yet played.

  When you then open iTunes, this Playlist will have even the chapters that you have not listened to. As you point out, the position of reading in each file is recalled by iTunes (there is a setting for each file that controls).

  Try it, it won't take long to implement.

  ---------------------

  Create a new list of smart playlist (in Windows, use Ctrl + Alt + N) and you will see this (obviously without the orange exclamation points!):

  

  You change the fields with the asterisk to resemble the following example. Click the + (arrows) button to add a new line for additional rules:

  

  Note:

  • the above view is finds / discovers / Book list. It displays each chapter (even though my list has only one chapter!)
  • the "all (of the following rules :)" option is that once you add a second rule (by clicking on the button +) ")"
  • the Album is the title of the book audio. When you look at a chapter read the information, it is listed as the title field
  • the number of plays is incremented when you play at the end of this chapter. If you have different play account for chapters, you can reset play if you wish. If each chapter has been played once, the value rule in the Playlists of plays / is less to / 2 so that each chapter is in the list once more until you play this chapter for the second time.

  You can rename the playlist for what suits you. I chose Mexicanos in my example (as part of the title of the book).

  In addition, you can manually set the order of the chapters within the playlist if it isn't as you wish, by selecting the left instead of one column is selected and then dragging chapters within the list.

  Let us know how you go.

• prototype of the project file information

  I have a request where I build a dll and the functions in the dll must be packaged for use in other software. I am creating the function wrapper for text file automatically. Ideally I ould like to use only the file of the project to do, but there is some information that I don't see in the file.

  I don't see where the prototype of the function. For this reason, I tried to build to the VIProtoInfo I can get all the parameter names, if they are controls or indicators and can determine is that they are chains, but I do not see the data type of other types of controls. I also don't see a way to determine what source for what vi. I know that I could open the screw ' and align stuff but I'm hoping for a cleaner solution.

  Is there a documentation available that could help me to find out this information?

  When you build the DLL, it will also produce a .h header file that contains the function prototypes of the functions in the DLL. Look at the photo 'exit for build specification' - you will see the generated files: http://digital.ni.com/public.nsf/allkb/A3804F88FCDB1E6286257CE00043C1A7

• Read the full file information.

  Hello

  I want to develop a program that reads files from SD card

  as:

  ABC. MP4

  123.Le txt

  XYZ.3gp

  Please give me the idea about it!

  I will reiterate that you should look into the FileExplorerDemo application that comes with the JDE.

  Specifically, see the class FileConnection, you will see that there is a method called list() and a method called getName().  The list() method will return a list of all the files that are in the current directory, so if you open a FileConnection in SDCard it may return a list like this:

  1. file:///SDCard/foo.txt
  2. file:///SDCard/Bob/
  3. file:///SDCard/wow.MP3

  Note that the number of section 2 has a ' / ' at the end to indicate that it is a directory.  So if you want to find all the files into it you need to open a FileConnection him and call the method list() on this connection.  To get just the file name and not all the information path open a FileConnection in a file and call the getName() on this connection method.  Here's how you should probably address the issue.

  1. Open a FileConnection on the SD card and call the list() method.
  2. Go through each element of list() and open a file connection to those.
  3. If the connection is a directory (that you can find with the method isDirectory() then call list again and recursively go through this process again.
  4. If the connection is a file call the getName() method and add it to your listfield.

• File information

  How can I get Photoshop to remember what I type in the information file? There is a way to remember my name and Web sites, but I don't know which button to press or click

  You think the semi-automatic entered option in file > Preferences of information that has been deleted after CC v 14

  You can create a metadata template instead.

  Creating metadata templates | Photometadata.org

• vSphere device instant Reversion fails: A general system error occurred: could not remove change tracking file

  Many people, I'm a little in the soup this time!

  My goal is to improve of vSpere 5.0 to 5.5 has. I have the new device ready to go, but the old device just not show me the upgrade tab. Because I had already taken a snapshot, I thought that I would give to the 'update' a go. Then I changed my mind and tried to go back to the snapshot and received the error in the title:

  A general system error occurred: could not remove the file change tracking.

  I wonder if there is a difficulty, I can try to get back to a good functioning device 5.0 before I retry upgrade - or if I should just set up my new 5.5 a device from scratch. I use only 3 guests on more Essentials.

  Thanks for all the tips!

  If he has only 3 guests, I will deploy a 5.5 device costs.

  Concerning

  Girish

• Date fields have no calendar under file information box tool

  Hello

  the new and improved version of the PS has changed the information area of the file, such as a newspaper photographer, I use it all the time.

  in previous versions, for example the date box allowed various dates to be entered, which now seems to be missing

  or can I do not see how change or do it properly?

  Adobe have someone who can explain these changes, why they made them, how best to fill them now, if they

  are compatible with previous versions.

  On a positive note, file info seems a larger and easier to read a part of demand :-)

  Thank you, Dave.

  Dave, you're right. This feature has been removed from 2014 CC PS we dropped all Flash content and are passed to the HTML based panels.

  ~ David