Similar Questions

• How inegrate OID with OEM 12 c Cloud Control

  Hi all
  
  Is someone can you please tell me how I can integrate OID with OEM 12 c Cloud Control. As we integrate our OID with weblogic administration console, is it possible to integrate the control of cloud OEM with OID?
  
  Thanks in advance!

  Hello

  Please find the URL below:
  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/security.htm#BABGAGIJ

  Following article will provide you with information related to the integration of the OID:

  13.2.5 oracle Internet Directory (OID)

  You can implement an OID authentication scheme have Enterprise Manager to authenticate users against the OID.

  The emctl config auth oid on the WHO command creates an OracleInternetDirectoryAuthenticator type WebLogic authentication provider that uses the configuration specified by the command parameter values. All the configuration values specified not retain the default values. Tuning and modification of the OID advanced configuration settings is performed through the Console of Administration WebLogic Server and not the emctl config oid auth command.

  Prerequisites

  LDAP Directory Internet Oracle server is turned on.

  Run the oid emctl config auth on each SGD command.

  emctl config auth oid-ldap_host - - ldap_principal ldap_port [-ldap_credential ] [-sysman_pwd ] - user_base_dn - group_base_dn
  where:

  ldap_host: LDAP host name

  ldap_port: the LDAP port

  ldap_principal: the unique name (DN) of the user LDAP of the WebLogic Server should use to connect to the LDAP server.

  ldap_credential: password for the user specified by ldap_principal.

  user_base_dn: the basis of unique name (DN of the tree in the LDAP directory that contains the users).

  group_base_dn - the base distinguished name (DN of the tree in the LDAP directory that contains the groups).

  Example:

  emctl config auth oid-ldap_host "ldaphost" - ldap_port "3060-" ldap_principal "cn = sleep" - user_base_dn "cn = users, dc = us, dc = oracle, dc = com" - group_base_dn "cn = groups, dc = us, dc = oracle, dc = com" - ldap_credential "my_ldap_password" - sysman_pwd "my_sysman_password".
  Stop the SGD.

  emctl stop who-all

  Restart the SGD.

  emctl start SGD

  Note:
  For deployments of Enterprise Manager in several instances of the WHO, emctl config auth oid must be run on each SGD. Each MSO must be restarted so that the changes take effect.
  Test the Configuration of OIDS

  Use the WebLogic Server Console of Administration (tab users and groups) to check if the configuration of the OID is successful. To access this tab, select Home/summary of Security Realms/myrealm/users and groups. Tab users and groups, you will see the users and the groups showing the OID.

  Best regards
  Vincent

• The Oracle HTTP Server come FREE with the Oracle database

  Hello
  
  Please let me know if Oracle HTTP Server are FREE with the Oracle database.
  
  Also any idea how much it would cost roughly to buy independent?
  
  Thank you

  Please let me know if Oracle HTTP Server are FREE with the Oracle database.

  If this is a related issue of license then better check with the sales representative in your area. Oracle sales team can only confirm the details.

  As far as I know if a product is delivered in another product then product main price includes the price of the licenses for all.

  Example: OEM license purchase, will include the license for Weblogic.

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Reinstallation of Windows 7 with OEM license with an OEM license and the manufacturer's warranty expired

  My hard drive starts to die, if I want to backup all my data and be ready in case it fails. One of the things on my list of verification is to ensure that I can reinstall Windows 7 if need be.

  I don't have in my possession a Windows reinstallation disk, so I want to create a USB bootable for windows 7. The link to the .isos DIgital River that I use to create my bootable USB key doesn't work for users with OEM licenses. Very annoying, but I can legally get a Dell reinstall drive instead. But Dell wouldn't send me reinstallation disks because my warranty with Dell expired.

  The result of this is that if your a manufacturer guarantee expired, you can no longer reinstall windows on the same computer!

  Dell says it is responsible for providing the relevant recovery media, including Windows used to do with the Digital River .isos, but who no longer work for people with Microsoft's Windows 7 OEM license. Microsoft says that it is the responsibility of Dell to provide its customers with the recovery media (disks to reinstall windows) in the first place. Personally, I'm not interested in the blame game - I just want to have access to a recovery media so I have the option of legally re - install windows 7 in the future with my OEM license.

  Can you help me with this problem? Thank you.

  Downloads Microsoft removing the Digital River and replacing them with a non-functional tool are extremely boring.

  If you can still start, update Dell backup and restore to the latest version:

  https://www.YouTube.com/watch?v=7yOz10Y8GCE

  http://www.Dell.com/support/home/drivers/DriversDetails?driverId=8HY96

  Make a USB (older than 2012 systems) recovery or recovery external hard drive (more recent than 2012 systems):

  https://www.YouTube.com/watch?v=hu6jx-QG7xE

  Boot from it to the new hard drive and use it to reinstall. Recovery media is using earlier versions may not work on the new disks.

• Can I install Windows 7 Pro on Windows 8 Pro Hyper-V with OEM Windows & Pro disc.

  Can I install Windows 7 Pro on Windows 8 Pro Hyper-V with OEM Windows & Pro disc. I have a laptop windows Pro 8 and a lot of programs that I use is not compatible with 8. So, I enabled Hyper-V so that I can install Windows 7 Pro on the virtual machine, but I bought a bad DVD because it is an OEM. How can I can go about this.

  If it's a Windows 7 Professional OEM System Builder License, Yes, it will work fine.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• UPDATE BIOS WITH OEM WIN 7

  Hello, I'm under Win7 64-bit OEM version. I want to update my BIOS by removing the old BIOS chip and its replacement by a new chip with the latest BIOS on this subject. My question is, will see the BONE and detecting the new BIOS as a computer or a new Board of Directors. I will replace the CMOS battery at the same time.

  All advice appreciated.

  Thank you, Buster.

  Well well well, its my lucky day, I have triumphed!  I thought I would take a shot at a flash, downloaded the update of the BIOS on the XFX 4 times site, whenever Win Zip told me it was an archive invalid so gave up on that!

  Swapped the chip for the BIOS and CMOS battery, started waiting for re configure CMOS and BIOS, but all my settings was intact! How bizzare!

  Entered 'System' and noted that I had 3 days to activate, click on "Activate now" problems while waiting but no.. bosh... work.  Well happy.

  Thanks for your input guys. At least, it has been proven that you can put a fresh BIOS chip in a system with OEM operating system.  All the work took about 10 minutes!

  Thanks again, Buster.

  Thank you to let us know.

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Most recent version of the Oracle client version is compatible with the low version

  Most recent version of the Oracle client version is compatible with the Oracle DB low version
  
  Client Oracle 10.2.0.5 version should be compatible with 10.2.0.4 DB?

  Yes - see on Oracle (ID 207303.1) support compatibility table

• Problem with OEM 11g

  Hi all
  
  
  I am facing problem with OEM 11 g. It was taken down automatically, however I am not able to find the specific reasons. From now on, it has been started.
  
  But want to know the reasons for which he was descended. Please guide me how to solve.
  
  
  Thank you

  2011-12-10 12:27:51, 106 EMAgent wire-4252630400 normal shutdown (00703)

  Here's the clue. It is emagent normal shutdown. Check order OS history
  As
  $history | grep emctl

  and check is only he planned to stop?

• Integration of Oracle Apex 4.0.2 with EBS R12.1.1

  We could integrate Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf successfully.
  
  The document said to navigate from EBS to Oracle Apex without any second login screen (works very well!), but now how we sail to EBS to Oracle Apex (in the same session) without any screen connection again as below
  
  User login of EBS-->--> Oracle Apex-> EBS EBS
  
  Please help to achieve this goal.

  Hello

  In your application's authentication scheme in the sign-out URL Section, gives the following

  wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://xyz.ck.com:8010/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGE
  

  Provide your url on ebiz instead of http://xyz.ck.com:8010 in the link above.

  Thus, while pressing the logout link in your apex, you will not be redirected to login ebiz again page, it will be redirect you ebiz menu homepage back in the same session itself.

  This will work for sure.

  Good luck!!!

  Change your login username of "805196" in a meaningful Word.

  Brgds,
  Mini

  -------------------
  If this has answered your question, then awarded points and close the debate.

• ORA-01035: ORACLE only available for users with the RESTRICTED SESSION privilege

  Whenever I have to connect as user sys as sysdba, I can connect at ease.
  
  But every time that I try with a user (one for monitoring tool). I get a message, database is in restricted mode.
  
  SQL > connect patrol05/patrol $05
  
  ERROR:
  ORA-01035: ORACLE only available for users with the RESTRICTED SESSION privilege
  
  WARNING: You are more connected to ORACLE.

  Your database was opened with restricted session.
  As sysdba, run the following command to session restrcited dissable the option:

  alter system disable restricted session;
  

  Best regards
  Norbert

• Move to Oracle Database 11g Release 2 with Mike Dietrich

  Hi friend;
  
  Yesterday, I was in an Oracle in Istanbul.
  
  In the seminar; Author Mike Dietrich, who works in Germany-Oracle show us how to do the step of database Oracle 11 g Release 2. His presentation available on my blog.
  
  I highly suggest to check this pdf. It already has cover:
  
  -Support of politicians, patches, Documentation, upgrade paths
  -Database upgrade (DBUA, command line, after the upgrade, alternatives, Clusterware and ASM upgrade)
  -Diagnosis and Tuning
  -Performance evaluation
  
  You can find many useful tips, path of evolution, related notes metalink etc etc... in the pdf file.
  
  http://heliosguneserol.WordPress.com/2010/06/17/move-to-Oracle-database-11g-release-2-with-Mike-Dietrich/
  
  Respect of
  HELIOS

  Helios,

  Interesting paper! Thanks for sharing with us.

  Thank you
  Hussein

• Don't take any Message When installing Oracle 11 g 1 material with dbca on Solaris10

  Hi people Oracle,.
  
  Please can someone help me;
  
  When installing Oracle 11 GR 1 material with dbca on Solaris10 als I get to the last step with the creation of database after clicking on finish OK for HTLM model it takes too much time.
  And nothing out like the other error more than an hour. It's just waiting without installation procedure. Nothing
  I tried uninstall-install-uninstall-install but nothing. I google but nothing.
  Reason why I'm asking you please your advice, or a good link where to look.
  
  
  I thank in advance
  Sincerely
  Easyman

  It was just a workaround solution, since I plugged directly in the external display. Try this with X fonts.