Don't take any Message When installing Oracle 11 g 1 material with dbca on Solaris10

Similar Questions

• "The product key entered don't match any available to install Windows images. Enter a different product key.

  Greetings!

  Create a custom DVD of Windows 7 with pre installed office 2010, applications, drivers, updates and custom in GPEdit settings.

  Used Windows 7 DVD, downloaded from the Internet and installed all the software and then sysprep for oobe.
  Captured by using ImageX, install.wim custom size is almost 6.7 GB.

  Replaced the custom with the original install.wim file and the error message:
  "The product key entered don't match any available to install Windows images. Enter a different product key.
  This error message appears after pressing the button "install now".

  On that note, I removed file ei.cfg of Windows 7 ISO, now I get that says - could not locate the image

  Any suggestions would be acceptable.

  RK

  It is an equivalent using a product key from a version (say OEM) on a different version (e.g. retail). If you can get a download from the MSDN site, then you can also get a matching key for her.

  Please specify presents first, and then we can help you.

  You can also reach your local MS Support for assistance in the present.

  www.Microsoft.com/worldwide

  See you soon,.

  Khatri

  MS-APAC

• When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes

  freezesistalling on a new os installed hd ok sp1 vista freezes causingimproper install

  When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes causing no adequate facilities

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  Fortunately the Adobe customer service has been able to help me by making a change to my hosts file.

• I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

  I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

  Hi Simon,.

  I'm sorry to hear that you are having problems connecting to ExportPDF by the reader. I checked your account and everything is fine there.

  To start, please make sure that you have the latest version of the reader on your computer by choosing Help > check for updates.

  If you still have problems to connect by the player, please try to connect to the web interface at https://cloud.acrobat.com.

  Please let us know how it goes.

  Best,

  Sara

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

  Dear all

  I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

  I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

  I have installed weblogic with no problems, but when you call BI installation I get this error

  xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

  I tried to adjust/etc/security/limits

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 196608

  Memory (KBytes) unlimited

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  threads (per process) unlimited

  process (per user) unlimited

  I don't know if this is related but I thought that it might help, but it didn't

  I have enough memory on the server, so what else could be wrong?

  Thank you all

  He is certified according to

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

  in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

  I only had to run the command from the same directory where the bin file!
  I used to run it like this

  . // bi_platform - 12.2.1.0.0_aix_ppc64.bin

  I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

  Thanks to you all

• Issue of INS-35354 when installing Oracle RAC 12 on infrastructure Oracle Grid 12

  Hello

  I am trying to install Oracle RAC 12.1.0.2 one node installation on Windows Server R2 2012, but the installer told me:

  'Valid [INS-35354] the system on which you try to install Oracle RAC One doesn't not part of a cluster.'

  On the same server I have is installed and running Oracle Grid Infrastructure + ASM.

  I don't know what is missing the installation program, which is possible to register? The installation program does not provide which had not passed the specific audit.

  Thanks for the tips

  Georg

  

  

  

  Hello

  A CCR node does not mean that you install the grid infrastructure in a single node and install a base of a RAC data on this node.

  Basically, a concept CAR is similar to active passive clustering to provide high availability. To have a node database RAC upward and launched, you will have to install clusterware on at least two server by selecting the option during the installation of the IM.

  Pls follow the below post for detailed answer

  INS-35354: validates the system on which you are trying to install Oracle RAC not part of a group when installing a 12 c RAC node database

  Concerning

  Krishnan

• Forgotten original password when installing Oracle 10 g XE. What can I do?

  Hi, I have installed Oracle 10 g XE and my labtop two years ago, but I never really used it until now that I need to. The problem is that when I try to open a session asks me the password I originally took in the initial installation of the software, which I do not remember anyway. I was wondering if anyone could advice me in what should I do to begin to use the database? Thank you very much. Any help will be greatly appreciated.

  Hello

  From the Service Panel, you can start the OracleServiceXE service to start the database.

  Then, from a DOS window (connected with the OS user with which that oracle was installed), try this:

  set ORACLE_SID=XE
  sqlplus /nolog
  connect / as sysdba
  alter user sys identified by ;
  

  This way, you will have the new password for SYS.

  You will have more details on the following link:

  http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/users_secure.htm#sthref290

  Beware, if you change passwords from APEX, you will need to do some operations on the demand side too.

  Hope this helps.
  Best regards
  Jean Valentine

  Published by: Lubiez John Valentine on February 12, 2011 22:20

• problems when installing ORACLE 10 g R2 RAC on RHEL 5.3

  I want to install oracle 10g R2 RAC on RHEL 5.3 in a test environment. My goal was to install using ASM.
  I went through ok prerequisites before starting the installation.
  Since RHEL 5.3 does not support raw devices, I used
  http://www.idevelopment.info/data/UNIX/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#configure%20iSCSI%20Initiator%20and%20New%20Volume
  
  udev to configure shared storage. my storage is on openfiler as an iSCSI target.
  
  fdisk-l on both nodes shows the shared disks.

  [root@node1 ~]# fdisk -l
  
  Disk /dev/sda: 21.4 GB, 21474836480 bytes
  255 heads, 63 sectors/track, 2610 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sda1   *           1          13      104391   83  Linux
  /dev/sda2              14        2053    16386300   8e  Linux LVM
  /dev/sda3            2054        2372     2562367+  82  Linux swap / Solaris
  
  Disk /dev/sdd: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdd1               1       10016    10256368   83  Linux
  
  Disk /dev/sdb: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdb1               1       10048    10289136   83  Linux
  
  Disk /dev/sdc: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdc1               1       10048    10289136   83  Linux
  
  Disk /dev/sdf: 10.5 GB, 10569646080 bytes
  64 heads, 32 sectors/track, 10080 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdf1               1       10080    10321904   83  Linux
  
  Disk /dev/sde: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sde1               1       10016    10256368   83  Linux

  [root@node1 ~]# ls -l /dev/iscsi/arpl*
  /dev/iscsi/arpl1:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sde
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
  
  /dev/iscsi/arpl2:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdd
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
  
  /dev/iscsi/arpl3:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdb
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
  
  /dev/iscsi/arpl4:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdc
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
  
  /dev/iscsi/arpl5:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdf
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
  [root@node1 ~]# 

  Configure the results of udev in the drives mapped to the names of persistent drive for example. / dev/iSCSI/arpl1/part1
  always when I enter the name of the raw device that I created I get the following error. Help, please
  
  Image:! http://img91.imageshack.us/img91/7448/Oracle.PNG!

  did you check that
  http://download-West.Oracle.com/docs/CD/B19306_01/install.102/B14203/storage.htm#BABBHECD
  http://download.Oracle.com/docs/CD/B28359_01/install.111/b28263/storage.htm#CDEBFDEH

  also before making what is proposed on the url posted by Mufalani.
  It seems that you should do the following:

  Verify the existence of udev mapping rule file /etc/udev/rules.d/60-raw.rules brute
  On HR/EL5, gross udev mapping rule file /etc/udev/rules.d/60-raw.rules must exist by default as part of the util-linux package, for example:

  # ls /etc/udev/rules.d/60-raw.rules
  /etc/udev/rules.d/60-raw.rules
  

  Create a custom gross udev mapping rules file, /etc/udev/rules.d/61-oracleraw.rules say, for example:

  # touch /etc/udev/rules.d/61-oracleraw.rules
  

  3B. Add raw udev binding rules to the /etc/udev/rules.d/61-oracleraw.rules file
  Add the binding rules gross udev in the etc/udev/rules.d/61-oracleraw.rules file, for example:

  # cat /etc/udev/rules.d/61-oracleraw.rules
  # Raw bind to Oracle Clusterware devices
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"
  

  If switch to RHEL5/OEL5 since an earlier version of Linux that has pressed persistent raw device bindings in the/etc/sysconfig/rawdevices file, the following script can serve as a basis to generate your RHEL5/OEL5 of the udev rules. Note that the script does not factor device name persistence.

  #!/bin/bash
  grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
  if [ -z "$minor" ]; then
  echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
  else
  echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
  fi
  done
  

• Installation adapter WUSB54GC gives 211 error message when installing with Windows 7

  I want to install an adapter WUSB54GC wireless to my HP desktop computer, running Windows 7 (64-bit).  Pilots don't is not loading.  I used the CD that came with the adapter (compatible Vista) and the download of Windows 7 from the Web site.  I get the same error message.

  Nevermind I figured it (using another thread).   Put it in the adapter, and then load the driver from the website manually from my USB.

• Problems when installing Oracle XE 11 g x 64

  Everything in the re - install Oracle XE, I see all of the files under the directory

  C:\oraclexe\app\oracle\oradata\XE

  It seems that no schema is created, including when coz I am trying to connect, I get the error below. Can someone guide me?

  

  The problem is resolved. I deleted some of the entries localhost in the host file and then tried to install the same. It worked.

• Same message when installing "We are unable to validate this serial number for Adobe Acrobat"

  I bought an upgrade from live Adobe for Acrobat Pro DC. Adobe shows my latest Acrobat X Pro version. Yet, when you go through the steps to install I get the same message repeatedly: we are unable to validate this serial number for Adobe Acrobat Pro. I purchased from an Adobe reseller (I checked that they are an authorized dealer) 6 Lightroom for which I also have the same message. Online tech from Adobe technical support is severely lacking. If anyone has a solution or knows the problem, please advise.

  When you start the installation of your dc acrobat you will be asked your serial number of dc.  After that you see the error message, or you see a drop-down list with a list of upgrade products (which include acrobat pro x) eligible?

• I want to reset my security question I forgot the answers? BUT I don't see any options, when I try to reset, saying "reset the security questions? Help, please

  I tried to change my security questions that I forgot my answers, but I don't see any option to reset security issues?

  Need help please, I'm stuck with this?

  Will be appreciated if helped.

  Thank you

  SKLB

  Look at this article. In my view, that information can help you. If you forgot your Apple ID - Apple Support security questions answered

• I don't get any messages I send to discussion groups. The message is sent to everyone in the group, but me. Why?

  do not receive any messages sent to the group. It may be a problem with gmail. messages sent by me are not returned to me

  Gmail offers aggressive spam filtering. Can you check if the messages can be in a junk folder or if you can fine rune of all rules for messages on your behalf (a lot of spam is sent with your own address as the sender inserted)?