Similar Questions

• Audio popping up on imported Clips

  Hello

  I am very new to Final Cut Pro and 2 major problems:

  First of all, I hear audio pop regular, strong throughout my clips.

  Second, my exported files are far too great, to more than 9 GB for a 9 minute clip.

  My company is video teaching of music online. I used to edit using an older version of Premiere Pro, but passed to Final Cut, because I heard it was easier to sync for multicamera editing clips.

  I recently completed the shooting of months of video tutorial for a new online course, using a configuration of 2 camera, with all the noise (LAV mic, guitar and backing track signal) enter one of the two cameras Sony HDR PJ-620 via a Mackie mixer, in order to save the record audio separately.

  I am a professional musician and know a fair amount to get a decent sound in the studio, so my raw files from video MTS sound of intact, with good balance and EQ level. I managed to tweak everything as I wanted until I started filming.

  However, when I import files into Final Cut to edit, I experience loud pop during playback. It is extremely sensitive and occurs every 3 or 4 seconds.

  At first, I assumed that the problem came from my system, hard to follow. I use proxy media during editing. However, persistent organic pollutants are still on the video after export.

  My sound levels in the project is without cutting. They peak at about-3 db. I did no equalizer or sound settings setting and there is no audio compression or effects, just the audio crude comes from the MTS file.

  Secondly, as I mentioned above, when I export my project via the master file by default settings, the file size is huge. It seems incredible, but it weighs about 9 GB for a 9 minute video.

  My videos are meant to be online streaming via a delivery service of content such as Amazon S3 or Vimeo Pro (not YouTube). I need them to be of good quality, but much smaller than they are currently.

  Can you recommend a decent framework of export? Should I have converted the MTS to Mov files before import into my project? I used to do this with Premiere Pro, but he said I wouldn't need to in Final Cut.

  I'm under El Capitan 10.11.5. My version of Final Cut is 10.2.3.

  I use a mid-2014, retina 15 "Macbook Pro with a processor Intel Core i7 2.8 GHz, 16 GB of memory. My graphics card is a NVIDIA GeForce GT 750M 2048.

  Any advice would be greatly appreciated.

  Thanks in advance.

  IF you work with the camera .mts files, the media was not imported correctly. If you import from the camera through the window to import the files get reupholstered for QuickTime and tracks worked for production. . MTS is a horrible format and should not be used in production. You might try to optimize media. This creates files of proti which are very large and require fast disks, but are of very high quality.

  Export a master file and set the H.264 format.

• OK to mix 'of connection to the switch"and"close relay switch?

  Hi all

  I'm developing a test sequence using the card multiplexer 2527 to the track signals.  To configure the card, I use DAQmx switch functions.  In my application, I have a Subvi routine that imports the data from a spreadsheet Setup and run a loop for to set the configuration for each step (each iteration of the loop contains the channel for 2527 card information).  The topology is set on the first iteration, as well as the configuration of the path to the first string.

  My concern is this: I need to close the extra channels/relays without changing the topology or resetting the device.  In the first round, I use "connection to the switch" function to set the initial path, (ch0 to com0 for example).  Then in subsequent iterations of the loop, I use "Relay close switch" function to close the additional channels individually (for example k2).  In the end, when the measure is taken, both ch0 ch2 must be closed and routed to com0.  This implementation is so sure, or am I somehow to make the adjustments to the initial loop?

  I would like to test this with the hardware, but it is not yet available.

  Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer.

  Please notify.  Thank you.

  GSinMN

  Hello GSinMN,

  It's OK to mix 'of connection to the switch"and"Close relay switch"If you understand what's happening below. "Switch Connect" connects two channels by closing a path of relay between the channels, then "Close relay switch" can be used to change the State of the individual relays. If you are not careful you can mess up your connection by activating / deactivating relays that are part of the route connecting your channels.

  "Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer."

  I would recommend the topology independent if you want to stick with connections to channels only. http://zone.NI.com/reference/en-XX/help/375472G-01/switch/2527_independent/

  Initial connection:

  CH0-> pcom0

  pcom0plus-> icom0plus

  pcom0minus-> icom0minus

  icom0-> com0

  In each future iteration just connect to the next to pcom0 channel (which will be indirectly connect it to com0):

  CH1-> pcom0

  CH2-> pcom0

  ...

  ...

  Jarrod

• Outputs analog BNC-2120 to stop working randomly

  I have a BNC-2120 Module. I have the analog outputs implemented with an Assist DAQ. I'm running a square wave, or triangle wave at a very slow pace (.35 Hertz). I'm tracking signals with a waveform graph just before going to the modules DAQ help. The system works well anywhere from a few minutes to 25 minutes. The results seem to just stop working, but I still see the signal on the graphic display of waveform. I think that the BNC-2120 module has some questions. Someone had a problem where the output just stop working? I look in my program of VI?

  Hi gwing,.

  There could be a few possibilities that could go wrong. Could you upload your code? DAQ hardware do you use with the BNC-2120?

  Best regards

  Jonathan

• How to connect dwyer SERIES 629 differential pressure transmitter to the acquisition of data 9219 and read the signal?

  Here is my sensor
  Pressure sensor

  Here's the DAQ data sheet:

  ACQUISITION OF DATA NOR 9219

  Here are my issues:

  First of all I don't know what is LO and HI exactly in the DAQ 9219 material.

  Second, I don't know what pin code I should connect the DAQ sensor signal wire. PIN 4 or 5 pin? The sensor has three pins, and I guess I should connect the other two wires to the power supply.
  Thirdly how to calibrate the sensor. In labview choose voltage in the wizard?

  I'm pretty new in this acquisition of data and I need your help.

  Thank you

  Hi SilasIII,

  Hmm well 3 sons are probably on the ground, the power and the return signal. The datasheet for the sensor says:

  

  First of all, you need to know which model you have (4-20mA, 0 - 5V or 0-10VDC). HI refers to the return signal, LO essentially means the land of the food that feeds the sensor. Then, you must get the 13-30 VDC supply. I don't think this should be too complicated and can be a simple wall DC power. You can learn how to create a custom in DAQmx scale. I hope that this is a starting point.

  Kind regards

  Eric

• cushion track magic questions

  erratic behavior using magic pad with El Capitan and my Mac mini (2012). Cursor moves without my touch or be crazy way. I tried all the Apple Web site suggestion, yet nothing works. Help!

  Cancel the twinning of the bluetooth connection and replace the batteries in the Magic Trackpad or recharge the Magic Trackpad II. Pair the device again. Keep your cellphone with bluetooth enabled a greater distance of the Mac mini, or turn off bluetooth entirely on this subject.

  What other bluetooth (Wi - Fi) are around, or in use of your Mac mini? It may be some conflicts of bluetooth with other devices of BT or any interference 2.4 Ghz cordless phones, phone cell phone bluetooth proximity of radio, speakers, bluetooth, microwave oven and 2.4 Ghz Wi - Fi signals. Use a process of elimination to track down the source of interference.

• Crackle on audio/entry track record - no buffer, plug-ins or sound card. AAARGH!

  I have a slight Crackle on phonograms and supervision right of entry and via these forums and other troubleshooting failed diagnose the problem. Seems to be a product where caused by the audio signal, as occurs in response to an audio input (guitar and bass), not a constant or random noise. A faster attack of the audio signal produced more noticeable crackling.

  It happens to all sizes of the I/O buffers

  CPU load does not seem to be a problem - CPU monitor, both within the logic and across the system may display less than 10% (between all hearts) and it happens when dry recording in a project with a single track (audio) without plug-ins.

  Established between Apogee Duet and Scarlett Solo using different cables and which makes no difference.

  Does not occur during playback back already recorded audio - only new records and monitoring live (or recorded on a track and playback) entry

  Removed the unused midi drivers from (a thread somewhere suggested that for a similar problem).

  .. I am now mainly to a loss of the cause. Don't you no creaking when recording an audio file to QuickTime via the loudspeaker internal, next step, I can think of is to install Garageband (but reluctant to pay apple even £3.99 they want to download it to the app store!) and see if crackle present in audio recordings, in order to reduce it to a software problem (fingers crossed) all the material from the laptop. Or get a copy of logic 10.0 and see if the problem persists in this.

  Recently reinstalled logic 10.2.1 after repeated crashes (and abandonment of strength) when manually move the playhead... as well as other minor bugs 10.2.1 seems to have been shipped with, but this problem started a week or two after re - install, no problems so far here.

  As someone has any ideas other than a glance phone to Apple, which I fear would be very useful even when it doesn't seem to be a known issue.

  Thank you

  Sam

  MacBook Pro (retina, early 2013)

  10.10.5 Yosemite

  INTEL CORE I7 TO 2.7 GHZ

  16 GB OF RAM

  Logic Pro X 10.2.1

  Apogee Duet/Scarlett Solo

  Fixed. Questions of the instrument.

• Problem reading while tracking

  I've updated to 10.2.1 a week ago logic. Until yesterday, everything was fine when for some reason, I could hear is my guitar input even if I put the track at the entrance and selected the track I recorded (one new track). I know that I get a logic signal because I see the counter and when I play it back I can hear it then. When I go to record, I hear all other tracks, but nothing on the track, I'm recording. I use a Mackie Onyx 820i, which works very well.

  Figured it out. For some weird reason"monitoring software" got unchecked. "

• problems by recording the activity without signal

  I was walking in the Scottish Highlands.  I was wearing my Apple Watch one carrying my iPhone 5.  There was no signal (not in any form: no GPRS, 3 G, etc. - the message at the top of the phone was 'no service'.)  My walk lasted at least an hour.  Later, I noticed that the watch was told that I had only been active for 6 minutes - despite quite fast gong uphill.  Is this unlikely due to the no signal problem?  I'm saving that the watch can work (in a limited way) if I do not take an iPhone to run, etc. but it can work to track activity, if there is 'no service '?  I did not use the Green running Apple app person nor any other part 3 (like Nike +).  The is the first time that I have been out of reach of any signal at all and the first time the activity did not seem to accurately record.  The two things are related?  Thanks for any help, much appreciated.

  Hello

  Every minute movement equaling or exceeding the intensity of a brisk walk taken into account in your daily exercise goal. The definition of a brisk walk varies from one person to another and depends on your personal information.

  To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > Edit - tap and adjust the settings, then press on in fact.

  If you take your iPhone with you and save your market as a workout through the app drive, data GPS can be used (if you have enabled location Services) to estimate your distance and pace. Otherwise, it is important that your arms swing naturally as you walk, because the watch relies on the movement of arms (identified by the accelerometer) to follow the movement.

  Calibrate your watch will allow him to estimate more precisely different results related to the activity by teaching how your arm movements relate to "Stride" lengths at different speeds. During calibration, ideally walk on flat ground. Otherwise, you could appear have moved less away (from GPS data) that you've actually done (if climbing and descent from the hills).

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Qosmio X 770-107 - 3D transmitter must be installed to get 3D

  I have a Toshiba x 770-107 and nvidia 3D Vision 2 glasses.
  I've had this laptop before and all I had to do was turn on the glasses and they worked.
  Now, with this new laptop, I had to install and connect this transmitter via USB to get 3d to work.

  Why can I not connect the glasses without it, as I have before?
  Are there templates within the 770-107 x models, and I bought an older one? Or do all 770 x built in transmitters. Would be - this associated screen? I have a dead pixel?

  I also suffers from the gpu limitation by playing video games.
  How can I fix?

  Thank you.

  > Also I suffer the gpu limitation by playing video games.

  The BIOS update would solve this problem, as already reported in this forum.

  > Are there patterns within patterns of the 770-107 x, and I bought an older one? Or do all 770 x built in transmitters.

  It depends on model of laptop that you bought.
  Some 770 X supports an internal IR transmitter.
  As far as I know the infrared transmitter Interior 3D vision must be placed on the right side near the internal webcam built as part of the screen. The infrared transmitter sends the signal to wireless 3D glasses.

  By the way: the 3D glasses can be used to approximately 40hours. Then, the battery is empty and must be loaded. The USB cable supplied with glasses allows you to recharge the battery of lenses. (light flashes orange during charging)

• JR 28 transmitter x WiFi browser can not connect to internet through aircard 762 s

  JR 28 x WiFi recognizes the aircard 762 card as having a very strong signal. Touching the screen of the transmitter to activate and authenticate the connection 28 x aircard goes through the process of connection and stops with a message; out of reach. The aircard card works fine with other devices. 28 x browser connects to the internet via a broadband router. The aircard card is on o2 3G and is equipped with a 4G sim card. New to the community and offer my apologies if this theme was examined.

  Hello ronjrrc

  From what I looked upward on the JR 28 x what it turns have android 4.2 you tried to get the device forget the network and then try to reconnect to the aircard map? She might have some bad settings saved for the aircard adapter not allowing to connect. Hope to hear your comments.

  DarrenM

• How one does sound loops on a track to create a song?

  I am new to apple.  I would like to know how to draw loops of sound on a track?  I chose the path and the instrument, now how to record sound? in my sony software you just draw on the road to a loop selected to place it on the right track and then read it.

  Wow, Sony must use a different concept based on your questions.

  I've never heard of a 'sound loop', don't know what that means.

  You or the other Records audio signals to an Audio track or MIDI signals from your MIDI keyboard on an Instrument track that creates regions. These area can be sealed off by dragging the upper right of the region.

  Then there are loops Apple Loops that you can access from the loop on the right browser. It is MIDI and Audio regions following the tempo (and pitch) of you project.

  It is always harder to relearn software (from another brand) that learning new software. I would like advice with a peak in the manual once a while to understand how different from what you are accustomed to Sony GarageBand.

• Range of the signal DAQmx outdated?

  It could be me not quite understand the works of ADC express signal range.

  I use a chassis SCXI-1001, SCXI-1600 USB DAQ and a table of 1520 SCXI and 1314 for measures of constraints.  Within daqmx I have my range néc - 500 to 3500 uStrain with an excitement of the factor of 10V and pledge of 2.2.  After a recent test, I measured more than 4000 uStrain.  Real or not (we think maybe it's a sign of bad) I feel like the ADC must be on track to 3500.  What I'm missing here?  If the range does not reflect the real max and min then what it means.

  The range you define just tells DAQmx range values to cover.  With your configuration, you might be able to read much read more than 4000 depending on the configuration.  The given info, I just couldn't understand that the device is set on currently, but I'm sure you could dig a little in the specifications with your configuration to find out what Beach is using the card in your computer.

  If you feel that the material can act weird, there's a great KB help with measures of constraint in case of problems with your specific hardware.

  How can I solve the inaccurate measurements with the SCXI-1314?

  http://digital.NI.com/public.nsf/allkb/625E1FE5C6DD2A0C862579600073009E

  -Bear

• Calibration frequency Offset transmitter and receiver with USRP® material

  Hello everyone, I read the scripts provided by The Mathworks on the frequency of calibration offset transmitter and receiver with USRP.

  The USRP® transmitter sends a sinusoidal signal at 100 Hz with the MATLAB, sdruFrequencyCalibrationTransmitter.mscript, the USRP® receiver. The USRP® receiver monitors the signals, calculates the transceiver frequency shift and displays in the command window MATLAB for calibration with the MATLAB script, sdruFrequencyCalibrationReceiver.m.  At the level of the receiver, frequency offset will be calculated and displayed in the command window. The program uses a Spectrum Analyzer to show the spectrum of the received signal. In the program, the corresponding sentense is '% display frequency spectrum. step (hSpectrumAnalyzer, rxSig); "Based on that, I thought that the spectrum analyzer would show the spectrum of the received signal. However, the Web site corresponding site shows "to compensate for a shift in frequency of transmitter/receiver, add frequency offset on the Central frequency of the receiver object SDRu system. Be sure to use the sign of the offset of your addition. Once you have done this, the spectrum displayed by the Analyzer of spectrum of the receiver system object must have its maximum amplitude at about 0 Hz." What I'm confused is, why the Spectrum Analyzer should have its maximum amplitude at about 0 Hz, not other values? Is it because of the characteristics of the USRP itself or the Analyzer of spectrum shows is the value of the difference between the Tx and the Rx after calibration?  I use neither-USRP 2920. Your response will be much appreciated! Thank you!

  The matlab mfile is found in the following links:

  http://UK.MathWorks.com/help/supportpkg/usrpradio/examples/frequency-offset-calibration-receiver-wit...

  http://UK.MathWorks.com/help/supportpkg/usrpradio/examples/frequency-offset-calibration-transmitter-...

  Yes if two devices are not locked to a reference clock, 10 MHz for the USRPs you will see a shift in frequency.

  Specifications in ppm, ppb can give you how it can be:
  http://digital.NI.com/public.nsf/allkb/2A0B9D3F365DEDEF86256BDB007354ED

  Bye!

• Trace the signal with little data

  Hello everyone,

  I have the problem of tracking. I would draw a signal I have greated. I store the profile of signals in a table and this table I want to give with "draw the waveform. The problem now is that my signal may have a minimum of 4 values. The function of "Draw the waveform" plots each position of the table in the graph. With 4 values, the result is a triangle signal but it is false, that the signal should be like a rectangle (signal Wave Drive). There is no action between that. I have the oscilloscope the correct signal with only values in the table.

  In the 1 following you can see the result. The signal has an offset of 5 V, just FYI. The signal should be the signal in the following 2 (orange).

  Hope someone can help me.

  Best regards

  Probably a trace type thin step in PlotWaveform will do what you want.

  You can experiment with styles of different path for example native of race graphs.prj: you can locate with finder example or simply search in the \userint folder.