Traffic between the clients

Hello

Two guest VM on the same host server copy (are in the same virtual switch) copy data between them using the DNS name.

How traffic is transferred?

I mean, data must use the same network card (and not the physical cable) and cable only DNS resolve, use the physical, I am correct?

Thank you

Hello

When virtual machines are in the same VLAN on the same portgroup traffic will be lit in the virtual switch and will not let the host. Only the DNS request will go to the physical network.

Tim

Tags: VMware

Similar Questions

  • "There is a time difference between the client and the server"

    Unit 4.0.3

    Everything worked very well, and all of a sudden, I'm not able to connect to the server unit using any domain account. When I enter the domain/name username/password, I get this error message:

    ************************************************

    The system is unable to log on due to the following error:

    There is a time difference between the client and the server.

    Try again or contact your system administrator.

    **************************************************

    I can use the same domain account (unityinstall) and the journal in other machines. I can connect the machine to the unit using a local account. There is no time difference between the DC server and unity.

    Need help,

    Thank you

    Partha

    Log on to your LOCAL computer using an account that has privileges

    At the command prompt, type the following:

    NET TIME ancien_mot_passe/set

    Found this on the MS site:

    Cannot open a session if the Date and time are not synchronized

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;232386&product=Win2000

  • "The relationship of trust between the Client and the domain controller has been lost."

    I had a client PC connected to a DC running 2003 SBServer.

    It was this error when he tried to connect with its domain account.

    "The relationship of trust between the Client and the domain controller has been lost."

    I had to connect as Administrator local and leave/re-join the domain with a different machine name.
    How can I fix the side Server?

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below and validate the request.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope this information is useful.

  • HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody

    Hello

    We have a cisco ASA 5505 and try to get the next job:

    ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client

    the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)

    When I try to access the url of the client, I get a syn sent with netstat

    When I try trace ASA package, I see the following:

    1

    FLOW-SEARCH

    ALLOW

    Not found no corresponding stream, creating a new stream

    2

    ROUTE SEARCH

    entry

    ALLOW

    in 0.0.0.0 0.0.0.0 outdoors

    3

    ACCESS-LIST

    Journal

    ALLOW

    Access-group outside_access_in in interface outside

    outside_access_in list extended access permitted tcp everything any https eq

    access-list outside_access_in note hyperion outside inside

    4

    IP-OPTIONS

    ALLOW

    5

    CP-PUNT

    ALLOW

    6

    VPN

    IPSec-tunnel-flow

    ALLOW

    7

    IP-OPTIONS

    ALLOW

    8

    VPN

    encrypt

    ALLOW

    outdoors

    upward

    upward

    outdoors

    upward

    upward

    drop

    (ipsec-parody) Parody of detected IPSEC

    When I try the reverse (i.e. from the internet host to vpn client), it seems to work:

    1

    FLOW-SEARCH

    ALLOW

    Not found no corresponding stream, creating a new stream

    2

    ROUTE SEARCH

    entry

    ALLOW

    in 192.168.75.5 255.255.255.255 outside

    3

    ACCESS-LIST

    Journal

    ALLOW

    Access-group outside_access_in in interface outside

    outside_access_in of access allowed any ip an extended list

    4

    IP-OPTIONS

    ALLOW

    5

    VPN

    IPSec-tunnel-flow

    ALLOW

    6

    VPN

    encrypt

    ALLOW

    My question is why this phenomenon happens and how solve us this problem?

    Thanks in advance, Sipke

    our running-config:

    : Saved

    :

    ASA Version 8.0 (4)

    !

    ciscoasa hostname

    domain somedomain

    activate the password - encrypted

    passwd - encrypted

    names of

    name 10.10.1.0 Hyperion

    name 164.140.159.x xxxx

    name 192.168.72.25 xxxx

    name 192.168.72.24 xxxx

    name 192.168.72.196 xxxx

    name 192.168.75.0 vpn clients

    name 213.206.236.0 xxxx

    name 143.47.160.0 xxxx

    name 141.143.32.0 xxxx

    name 141.143.0.0 xxxx

    name 192.168.72.27 xxxx

    name 10.1.11.0 xxxx

    name 10.1.2.240 xxxx

    name 10.1.1.0 xxxx

    name 10.75.2.1 xxxx

    name 10.75.2.23 xxxx

    name 192.168.72.150 xxxx

    name 192.168.33.0 xxxx

    name 192.168.72.26 xxxx

    name 192.168.72.5 xxxx

    name 192.168.23.0 xxxx

    name 192.168.34.0 xxxx

    name 79.143.218.35 inethost

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.72.254 255.255.255.0

    OSPF cost 10

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address 193.173.x.x 255.255.255.240

    OSPF cost 10

    !

    interface Vlan3

    Shutdown

    nameif dmz

    security-level 50

    192.168.50.1 IP address 255.255.255.0

    OSPF cost 10

    !

    interface Vlan23

    nameif wireless

    security-level 80

    192.168.40.1 IP address 255.255.255.0

    OSPF cost 10

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    switchport access vlan 3

    !

    interface Ethernet0/6

    switchport access vlan 23

    !

    interface Ethernet0/7

    !

    passive FTP mode

    clock timezone THATS 1

    clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

    DNS lookup field inside

    DNS server-group DefaultDNS

    domain pearle.local

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    object-group service RDP - tcp

    Remote Desktop Protocol Description

    EQ port 3389 object

    object-group service UDP - udp VC

    range of object-port 60000 60039

    object-group VC - TCP tcp service

    60000 60009 object-port Beach

    object-group service tcp Fortis

    1501 1501 object-port Beach

    Beach of port-object 1502-1502

    Beach of port-object sqlnet sqlnet

    1584 1584 object-port Beach

    1592 1592 object-port Beach

    object-group service tcp fortis

    1592 1592 object-port Beach

    Beach of port-object 1502-1502

    1584 1584 object-port Beach

    Beach of port-object sqlnet sqlnet

    1501 1501 object-port Beach

    1500 1500 object-port Beach

    the DM_INLINE_NETWORK_1 object-group network

    object-network 192.168.50.0 255.255.255.0

    object-network 192.168.72.0 255.255.255.0

    object-network 192.168.40.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    the DM_INLINE_NETWORK_2 object-group network

    object-network 192.168.50.0 255.255.255.0

    object-network 192.168.72.0 255.255.255.0

    object-group network inside-networks

    object-network 192.168.72.0 255.255.255.0

    WingFTP_TCP tcp service object-group

    Secure FTP description

    port-object eq 989

    port-object eq 990

    DM_INLINE_TCP_1 tcp service object-group

    port-object eq ftp

    port-object eq ftp - data

    Group object WingFTP_TCP

    DM_INLINE_TCP_2 tcp service object-group

    port-object eq ftp

    port-object eq ftp - data

    Group object WingFTP_TCP

    the DM_INLINE_NETWORK_3 object-group network

    object-network 192.168.72.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    the DM_INLINE_NETWORK_4 object-group network

    object-network 192.168.72.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    object-group network Oracle

    network-object OracleTwo 255.255.224.0

    network-object OracleOne 255.255.240.0

    network-object OracleThree 255.255.224.0

    the DM_INLINE_NETWORK_5 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network Grandvision4

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_6 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network Grandvision4

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_7 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_8 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network GrandVision_PC

    object-group service DM_INLINE_SERVICE_2

    the purpose of the ip service

    EQ-3389 tcp service object

    the DM_INLINE_NETWORK_9 object-group network

    network-object OracleThree 255.255.0.0

    network-object OracleTwo 255.255.224.0

    network-object OracleOne 255.255.240.0

    object-group service DM_INLINE_SERVICE_3

    the purpose of the ip service

    EQ-3389 tcp service object

    Atera tcp service object-group

    Atera Webbased monitoring description

    8001 8001 object-port Beach

    8002 8002 object-port Beach

    8003 8003 object-port Beach

    WingFTP_UDP udp service object-group

    port-object eq 989

    port-object eq 990

    WingFTP tcp service object-group

    Description range of ports for the transmission of data

    object-port range 1024-1054

    HTTPS_redirected tcp service object-group

    Description redirect WingFTP Server

    port-object eq 40200

    Note to inside_access_in to access list ICMP test protocol inside outside

    inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any

    Note to inside_access_in to access list ICMP test protocol inside outside

    access-list inside_access_in note HTTP inside outside

    inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www

    access-list inside_access_in note queries DNS inside to outside

    inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field

    access-list inside_access_in note the HTTPS protocol inside and outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq

    Note to inside_access_in to access list ICMP test protocol inside outside

    access-list inside_access_in note 7472 Epo-items inside outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472

    access-list inside_access_in note POP3 inside outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3

    inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC

    inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323

    access-list inside_access_in note video conference services

    inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any

    Note to inside_access_in to access list Fortis

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis

    access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq

    inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list

    inside_access_in list extended access udp allowed any any eq isakmp

    inside_access_in list extended access udp allowed any any eq ntp

    inside_access_in list extended access udp allowed any any eq 4500

    inside_access_in list of allowed ip extended access any Oracle object-group

    inside_access_in list extended access udp allowed any any eq 10000

    access-list inside_access_in note PPTP inside outside

    inside_access_in list extended access permit tcp any any eq pptp

    access-list inside_access_in note WILL inside outside

    inside_access_in list extended access will permit a full

    Note to inside_access_in to access the Infrastructure of the RIM BES server list

    inside_access_in list extended access permit tcp host BESServer any eq 3101

    inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group

    inside_access_in list extended access permit tcp any any HTTPS_redirected object-group

    access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2

    inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194

    access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group

    access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any

    inside_access_in list extended access deny ip any any inactive debug log

    Note to outside_access_in to access list ICMP test protocol outside inside

    outside_access_in list extended access permit icmp any one

    access-list outside_access_in Note SMTP outside inside

    outside_access_in list extended access permit tcp any any eq smtp

    outside_access_in list extended access udp allowed any any eq ntp disable journal

    access-list outside_access_in note 7472 EPO-items outside inside

    outside_access_in list extended access permit tcp any any eq 7472

    outside_access_in list extended access permit tcp any any object-group inactive RDP

    outside_access_in list extended access permit tcp any any eq www

    outside_access_in list extended access permit tcp any any HTTPS_redirected object-group

    outside_access_in list extended access permitted tcp everything any https eq

    access-list outside_access_in note hyperion outside inside

    outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group

    outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow

    outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323

    outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP

    outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC

    outside_access_in of access allowed any ip an extended list

    outside_access_in list extended access udp allowed any any eq 4500

    outside_access_in list extended access udp allowed any any eq isakmp

    outside_access_in list extended access udp allowed any any eq 10000

    outside_access_in list extended access will permit a full

    outside_access_in list extended access permit tcp any any eq pptp

    outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group

    outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive

    outside_access_in list extended access permit tcp any any Atera object-group

    outside_access_in list extended access deny ip any any inactive debug log

    outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip

    outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0

    inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240

    inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192

    inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group

    inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0

    inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0

    access-list 200 scope allow tcp all fortis of fortis host object-group

    access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group

    outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip

    outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0

    Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.

    Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0

    Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0

    Comment by Wireless_access_in-list of the traffic Internet access

    Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any

    standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0

    splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0

    standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0

    splittunnelclientvpn list standard access allowed host 85.17.235.22

    splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0

    standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0

    splittunnelclientvpn list standard access allowed host inethost

    Standard access list SplittnlHyperion allow OracleThree 255.255.0.0

    Standard access list SplittnlOOD allow OracleThree 255.255.0.0

    Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0

    access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group

    outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0

    outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0

    192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow

    192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    MTU 1500 dmz

    MTU 1500 wireless

    local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask

    mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm - 613.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (wireless) 1 192.168.40.0 255.255.255.0

    public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255

    public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02

    public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface

    public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255

    public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255

    public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255

    public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255

    public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255

    public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255

    public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255

    public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255

    public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255

    public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255

    public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255

    public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255

    public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255

    public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255

    public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255

    public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255

    public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255

    public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255

    public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255

    public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255

    public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255

    public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255

    public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255

    public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255

    public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255

    public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255

    public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255

    public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255

    public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255

    public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255

    public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255

    public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255

    public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255

    public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255

    public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255

    public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255

    public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255

    public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255

    public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255

    public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255

    public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255

    public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255

    public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255

    public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)

    public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)

    public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)

    static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255

    inside_access_in access to the interface inside group

    Access-group outside_access_in in interface outside

    Access-group Wireless_access_in in wireless interface

    Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1

    Route outside OracleThree 255.255.224.0 193.173.12.198 1

    Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1

    Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication LOCAL telnet console

    the ssh LOCAL console AAA authentication

    Enable http server

    http 192.168.40.0 255.255.255.0 Wireless

    http 192.168.1.0 255.255.255.0 inside

    http 192.168.72.0 255.255.255.0 inside

    http GrandVisionSoesterberg 255.255.255.0 inside

    SNMP-server host inside 192.168.33.29 survey community public version 2 c

    location of Server SNMP Schiphol

    contact Server SNMP SSmeekes

    SNMP-Server Public community

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds

    cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map

    card crypto outside_map0 1 match address outside_cryptomap_1

    outside_map0 card crypto 1jeu pfs

    outside_map0 card crypto 1jeu peer 212.78.223.182

    outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5

    outside_map0 map 1 lifetime of security association set seconds 28800 crypto

    card crypto outside_map0 1 set security-association life kilobytes 4608000

    card crypto game 2 outside_map0 address outside_cryptomap_2

    outside_map0 crypto map peer set 2 193.173.12.193

    card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5

    life card crypto outside_map0 2 set security-association seconds 28800

    card crypto outside_map0 2 set security-association life kilobytes 4608000

    card crypto outside_map0 3 match address outside_1_cryptomap

    outside_map0 card crypto 3 set pfs

    outside_map0 card crypto 3 peers set 193.172.182.66

    outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA

    life card crypto outside_map0 3 set security-association seconds 28800

    card crypto outside_map0 3 set security-association life kilobytes 4608000

    card crypto outside_map0 game 4 address outside_cryptomap

    outside_map0 card crypto 4 peers set 213.56.81.58

    outside_map0 4 set transform-set GRANDVISION crypto card

    life card crypto outside_map0 4 set security-association seconds 28800

    card crypto outside_map0 4 set security-association life kilobytes 4608000

    card crypto outside_map0 5 match address outside_cryptomap_3

    outside_map0 card crypto 5 set pfs

    outside_map0 crypto card 5 peers set 86.109.255.177

    outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5

    life card crypto outside_map0 5 set security-association seconds 28800

    card crypto outside_map0 5 set security-association life kilobytes 4608000

    Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map0 interface card crypto outside

    crypto ISAKMP allow inside

    crypto ISAKMP allow outside

    crypto ISAKMP enable dmz

    crypto ISAKMP enable wireless

    crypto ISAKMP policy 5

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet 192.168.72.0 255.255.255.0 inside

    Telnet timeout 5

    SSH 192.168.72.0 255.255.255.0 inside

    SSH GrandVisionSoesterberg 255.255.255.0 inside

    SSH 213.144.239.0 255.255.255.192 outside

    SSH timeout 5

    Console timeout 0

    management-access inside

    dhcpd dns 194.151.228.18 is 10.10.1.100

    dhcpd outside auto_config

    !

    dhcpd address 192.168.72.253 - 192.168.72.253 inside

    !

    dhcpd address dmz 192.168.50.10 - 192.168.50.50

    dhcpd enable dmz

    !

    dhcpd address wireless 192.168.40.10 - 192.168.40.99

    dhcpd dns 194.151.228.18 wireless interface

    dhcpd activate wireless

    !

    a basic threat threat detection

    host of statistical threat detection

    statistical threat detection port

    Statistical threat detection Protocol

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    Group Policy "pearle_vpn_Hyp only" internal

    attributes of Group Policy "pearle_vpn_Hyp only".

    value of server WINS 192.168.72.25

    value of server DNS 192.168.72.25

    Protocol-tunnel-VPN IPSec l2tp ipsec

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list SplittnlHyperion

    Split-dns value pearle.local

    internal pearle_vpn_OOD_only group policy

    attributes of the strategy of group pearle_vpn_OOD_only

    value of Split-tunnel-network-list SplittnlOOD

    internal pearle_vpn group policy

    attributes of the strategy of group pearle_vpn

    value of server WINS 192.168.72.25

    value of server DNS 192.168.72.25

    Protocol-tunnel-VPN IPSec l2tp ipsec svc

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list splittunnelclientvpn

    Pearle.local value by default-field

    Split-dns value pearle.local

    username anyone password encrypted password

    username something conferred

    VPN-group-policy pearle_vpn_OOD_only

    type of remote access service

    tunnel-group 193 type ipsec-l2l

    tunnel-group 193 ipsec-attributes

    pre-shared-key *.

    tunnel-group 193.173.12.193 type ipsec-l2l

    IPSec-attributes tunnel-group 193.173.12.193

    pre-shared-key *.

    NOCHECK Peer-id-validate

    type tunnel-group pearle_vpn remote access

    tunnel-group pearle_vpn General-attributes

    address pool VPN_Range_2

    Group Policy - by default-pearle_vpn

    pearle_vpn group of tunnel ipsec-attributes

    pre-shared-key *.

    type tunnel-group Pearle_VPN_2 remote access

    attributes global-tunnel-group Pearle_VPN_2

    address pool VPN_Range_2

    strategy-group-by default "pearle_vpn_Hyp only".

    IPSec-attributes tunnel-group Pearle_VPN_2

    pre-shared-key *.

    tunnel-group 213.56.81.58 type ipsec-l2l

    IPSec-attributes tunnel-group 213.56.81.58

    pre-shared-key *.

    tunnel-group 212.78.223.182 type ipsec-l2l

    IPSec-attributes tunnel-group 212.78.223.182

    pre-shared-key *.

    tunnel-group 86.109.255.177 type ipsec-l2l

    IPSec-attributes tunnel-group 86.109.255.177

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    inspect the pptp

    !

    global service-policy global_policy

    context of prompt hostname

    Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb

    : end

    ASDM image disk0: / asdm - 613.bin

    ASDM BESServer 255.255.255.255 inside location

    ASDM VPN_Pool_2 255.255.255.0 inside location

    ASDM OracleTwo 255.255.224.0 inside location

    ASDM OracleOne 255.255.240.0 inside location

    ASDM OracleThree 255.255.224.0 inside location

    ASDM location Exchange2010 255.255.255.255 inside

    ASDM location Grandvision 255.255.255.0 inside

    ASDM Grandvision2 255.255.255.240 inside location

    ASDM Grandvision3 255.255.255.0 inside location

    ASDM Grandvision4 255.255.255.255 inside location

    ASDM GrandVision_PC 255.255.255.255 inside location

    ASDM location LanSweep-XP 255.255.255.255 inside

    ASDM GrandVisionSoesterberg 255.255.255.0 inside location

    ASDM location Pearle-DC02 255.255.255.255 inside

    ASDM location Pearle-WDS 255.255.255.255 inside

    ASDM location Swabach 255.255.255.0 inside

    ASDM GrandVisionSoesterberg2 255.255.255.0 inside location

    don't allow no asdm history

    Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?

    If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.

    NAT (outside) 1 192.168.75.0 255.255.255.0

  • 4240, blocking some of the traffic between the VLANS local

    I have an IPS 4240 in interface mode inline between our firewall switches and kernel in the periphery. This connection is a trunk with 2 port VLAN, lets call them A and b. everything works fine 100% between the VLANS (the firewall makes routing inter - vlan) except for SSH/telnet of VLAN A VLAN B, which is a big problem.

    Everything works fine, including:

    Web/443/TFTP from A to B

    SSH/Telnet from B to a.

    SSH/Telnet to nowhere A share around the world

    SSH/Telnet from other networks to B

    I removed the IPS of the equation, and everything is back to normal, so something must be up with the PPE.

    This is a new deployment... so the sensor uses its default configuration. I don't see anything stuck. About the only thing that has been set up are the interfaces. I tried different values in the field VLAN by default in menu interface configuration does not, and I don't think it's related to the configuration of VLANS since https/web and everything works fine.

    What I'm missing here? Any ideas?

    Thanks AOT

    There were a few [normalizer engine] signatures that will drop the traffic without alerting. I don't know if they still do, but check for active sigs that use the normalizer engine and is not an alert action.

  • Information on the routing of traffic of the client VPN to PIX.

    Hey all,.

    I could follow the VPN Wizard included in the PDM and able to connect with the VPN Clients for the PIX. But I'm looking for more information about how the routing is done.

    For example, my remote is 67.71.252.xxx and my inside is 192.168.1.xxx. But if I connect via VPN to PIX Client, all data is transferred through my VPN to PIX and then trying to get out to the Internet.

    I'll settle for data goes 192.168.1.xxx for transit through the VPN. This configuration made via the PIX or is it the responsibility of the Client machine to set up rules of the road?

    All links to the guides to installation, or technical notes would be great.

    Thank you inadvance.

    Paul

    Hello

    I think the key word you are looking for is "split tunneling". This can be validated on the PIX using the vpngroup split access_list tunnel GroupName command.

    "Split tunneling allows a remote VPN client or encrypted simultaneous Easy VPN remote access device to the corporate network and Internet access. Using the vpngroup split-tunnel command, specify the access list name with which to associate the split tunneling of traffic. "

    In this example configuration: http://www.cisco.com/warp/public/110/pix3000.html, note that the same access list is used to "nat 0" and split-mining:

    access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0

    (Inside) NAT 0-list of access 101

    vpngroup vpn3000 split tunnel 101

    Order reference:

    http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ae.html#wp1099471

    Please let us know if this helped

    Kind regards

    Mustafa

  • server traffic between the VLANS (broadcast)?

    Hello

    I have a SGE2010, implemented with different VLANS for use on a LAN.

    I have clients with vlan10 vlan20.

    Vlan30 and admin on vlan40 servers.

    vlan10 = 172.0.1.0/24 gw 172.0.1.1

    vlan20 = 172.0.2.0/24 gw 172.0.2.1

    vlan30 = 172.0.3.0/24 gw 172.0.3.1

    vlan40 = 172.0.4.0/24 gw 172.0.4.1

    But to say that I'm running a server counter-strike. What should I do on the switch for the clients get the server up in the "server list" in the game?

    I read something on the multicast and 'IP helper. " But may not know how to do...

    Hi Torbjeorn, correct to support ip is used, called udp relay on this unit.

    http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/SFE2000/Administration/Guide/SFE-SGE2xxx_Admin_Guide.PDF

    from page 210.

    -Tom
    Please mark replied messages useful

  • Split of static traffic between the VPN and NAT

    Hi all

    We have a VPN from Site to Site that secures all traffic to and from 10.160.8.0/24 to/from 10.0.0.0/8.  It's for everything - including Internet traffic.  However, there is one exception (of course)...

    The part that I can't make it work is if traffic comes from the VPN (10.0.0.0/8) of 10.160.8.5 (on 80 or 443), then the return traffic must go back through the VPN.  BUT, if traffic 80 or 443 comes from anywhere else (Internet via X.X.X.X which translates to 10.160.8.5), so there need to be translated réécrirait Internet via Gig2.

    I have the following Setup (tried to have just the neccessarry lines)...

    interface GigabitEthernet2

    address IP Y.Y.Y.Y 255.255.255.0! the X.X.X.X and Y.Y.Y.Y are in the same subnet

    address IP X.X.X.X 255.255.255.0 secondary

    NAT outside IP

    card crypto ipsec-map-S2S

    interface GigabitEthernet4.2020

    Description 2020

    encapsulation dot1Q 2020

    IP 10.160.8.1 255.255.255.0

    IP nat inside

    IP virtual-reassembly

    IP nat inside source list interface NAT-output GigabitEthernet2 overload

    IP nat inside source static tcp 10.160.8.5 80 80 X.X.X.X map route No. - NAT extensible

    IP nat inside source static tcp 10.160.8.5 443 443 X.X.X.X map route No. - NAT extensible

    NAT-outgoing extended IP access list

    refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq www

    refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq 443

    permit tcp host 10.160.8.5 all eq www

    permit tcp host 10.160.8.5 any eq 443

    No. - NAT extended IP access list

    refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq www

    refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq 443

    allow an ip

    route No. - NAT allowed 10 map

    corresponds to the IP no. - NAT

    With the above configuration, we can get to the Internet 10.160.8.5, but cannot cross it over the VPN tunnel (from 10.200.0.0/16).  If I remove the two commands «ip nat inside source static...» ', then the opposite that happens - I can get then to 10.160.8.5 it VPN tunnel but I now can't get to it from the Internet.

    How can I get both?  It seems that when I hit the first NAT instruction (overload Gig2) that 'decline' in the list of ACL-NAT-outgoing punts me out of this statement of NAT.  It can process the following statement of NAT (one of the 'ip nat inside source static... ") but does not seem to"deny"it in the NON - NAT ACL me punt out of this statement of NAT.  That's my theory anyway (maybe something is happening?)

    If this work like that or I understand something correctly?  It's on a router Cisco's Cloud Services (CSR 1000v).

    Thank you!

    Your netmask is bad for your 10.0.0.0/8. I worry not about the port/protocol or since that can screw you up. A better way to do it would be to deny all IP vpn traffic.

    NAT-outgoing extended IP access list

    deny ip 10.160.8.0 0.0.0.0.255 10.0.0.0 0.255.255.255

    ...

    No. - NAT extended IP access list

    deny ip 10.160.8.0 0.0.0.0.255 10.0.0.0 0.255.255.255

    allow an ip

    Doc:

    Router to router IPSec with NAT and Cisco Secure VPN Client overload

    Thank you

    Brendan

  • a vSwitch does support internal traffic between the VLANS configured on the same vswitch?

    Hey gurus - I know that the virtual machines on the same port group will communicate internally - but a vSwitch will support internal communications between virtual machines on different VLANS configured on the same vSwitch?  Looking for definitive answers only.

    gman

    Welcome to the MSFN - no traffic is not internal when communicating through different VLAN-

    If you find this or any other answer useful please consider awarding points marking the answer correct or useful

  • Encrypted L3 Communications between the TOWER and WLC?

    Hi all

    I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

    1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?

      1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
    2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

    Strange but true - pointers will be greatly appreciated... Phil.C

    With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

    For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

  • Server to the client

    Dear all, I wrote a lookout process and now I have to use the client server architecture, please help me build the client version of the initial process. Best regards, Mohammad javad Danesh

    This tutorial describes the client-server architecture.

    http://digital.NI.com/manuals.nsf/WebSearch/278835D5FA7F20D3862574A200285527

    And also this article on the links between the client and server processes.

    http://zone.NI.com/DevZone/CDA/tut/p/ID/3989

  • authentication between the ACS and AD

    Hello

    I would like to know what kind of authentication mechanism ACS 5.1 use to speak with Active Directory. Does simply use MSCHAP, MSCHAPv2 or PAP. By default, it uses PAP to talk between the Cisco IOS and the AEC on the 5.1.

    If you llook at the default admin tab and click on allowed protocols---> he mentions PAP.

    Should I use a safe means of transport between the ACS and AD. IDF, so anyone can say the authentication mechanism?

    Thank you

    Any meeting of directors like telnet, ssh and comfort they always use PAP as an authentication method.

    Although communication pap can be captured and read in this case in clear text. However, since we have Ganymede in use, he always encrypt the whole package with shared secret defined on the IOS and ACS/GANYMEDE so if you capture traffic between the radius and the device you won't be able to decipher it without the key.

    In case you have Ray then using SSH (Putty) so that it can help you for a safe communication.

    ACS and AD support PAP, CHAP, MSCHAPv1 and MSCHAPv2.

    However, the administration does not work on another method of authentication except PAP.

    HTH

    Regds,

    Jousset

    Note the useful posts ~

  • Unable to pass traffic between ASA Site to Site VPN Tunnel

    Hello

    I have problems passing traffic between two ASA firewall. The VPN tunnel is up with a dynamic IP and static IP address. I have attached a diagram of the VPN connection. I'm not sure where the problem lies and what to check next. I think I have all the roads and in the access lists are needed.

    I've also attached the ASA5505 config and the ASA5510.

    This is the first time that I've set up a VPN connection any guidance would be greatly appreciated.

    Thank you

    Adam

    Hello

    Regarding your opinion of configuration Remote Site ASA that you have not added the internal networks of the Central Site VPN L2L configurations at all so the traffic does not pass through the VPN.

     access-list outside_1_cryptomap extended permit ip 10.1.1.0 255.255.255.128 10.182.226.0 255.255.*.* access-list exempt extended permit ip 10.1.1.0 255.255.255.128 10.182.226.0 255.255.*.* access-list exempt extended permit ip 10.1.1.0 255.255.255.128 10.182.0.0 255.255.*.* access-list exempt extended permit ip 10.1.1.0 255.255.255.128 192.168.170.0 255.255.*.* access-list exempt extended permit ip 10.1.1.0 255.255.255.128 192.168.172.0 255.255.*.* access-list exempt extended permit ip 10.1.1.0 255.255.255.128 140.15.0.0 255.255.*.* 

    Take a look at ACL configurations above. The 'exempt' ACL is used in configurations NAT0 and tells the ASA what traffic of exempting from NAT. "outside_1_cryptomap" ACL is used to tell the traffic between the subnets should be using the L2L VPN connection.

    So in short on the Remote Site ASA these ACLs should be identical. Make additions to the LIST of VPN L2L, then try again.

    I would also like to point out that to ensure that the Central ASAs L2L VPN ACL Site contains the same networks. The ACL on the Central Site will, of course, its internal subnets as the source and the site LAN remote destination.

    THW out of ' crypto ipsec to show his " shows you that only the SA between binding Site Central network and the Remote Site LAN was established. Others have not formed as the configuration is lacking at LEAST on the Remote Site ASA. Can also be the Central Site.

    -Jouni

  • flow of traffic between virtual machines

    If I had 2 machines virtual on the same slide in a M3 of b200 on the same vswitch, is communication on traffic between the 2 vms strictly inside the m3 Server?

    What if I had a virtual machines on a b200m3 and another virtual machine to another b200m3?

    same chassis and the chassis is connected to the FI

    Traffic between virtual machines will stay on the FI or it will mount the switch to basic?

    so, if is blade1 VM1 and VM2 is Blade2 and both on the same vlan
    Traffic will remain within FI or it will go up North to core?

    Both is possible! as I said above: If the entry and exit are on the fabric a RESP. B, it is switched.

    However, it could also be A penetration, exit on B or vice versa and then must go to the North (and get switched L2)

    What if

    Blade1 is VM1 and VM2 is on blade2 but on different VLANS, the traffic will have to hit the correct base gateway?

    Yes!

  • Hub and spoke VPN network traffic between two points talked

    Hi, I have a star VPN network topology, and all traffic is remote office to the data center,

    I have a request to build a tunnel between two remote sites to access some servers between two remote sites,

    Can I just change the ACL of valuable traffic to to include say a Cabinet to Office B in rule Cabinet a Datacenter and Office B tunnel to tunnel data center.

    In doing so, I can avoide the tunnel between two offices (and B)

    See you soon

    Hello

    You can make the traffic between the two rays go through the hub or build a new tunnel between the rays.

    If the hub is an ASA you must authorize same-security-traffic intra-interface permits

    If the hub and the spokes are routers, you can also use DMVPN to dynamically create a tunnel between the spokes when necessary.

    Federico.

Maybe you are looking for