Transcode DLNA 7 broken Windows

Similar Questions

• Stream 13-c002: 10 broken Windows, recovery & reset fail.

  Hello.
  
  I bought a laptop HP flow, with 10 Windows pre-installed.
  
  I burned a set of recovery disks. I also got the product key OEM of Windows from the BIOS.
  
  Then my broken Windows 10. Cannot start. Get reviews of the process died error.
  
  Then I tried to recover. I get errors on the recovery of all and reset methods. Tried to 'keep my files', 'erase disc', etc..
  
  Then I downloaded and installed the unique language of Microsoft Windows 10 N ISO. It installs and runs without error.
  
  But he does not accept the product key OEM HP on this Stream l.
  
  I suspect that the store may have updated the computer from 8 to 10, and the OEM key is for 8, not 10.
  
  According to the HP website, my warranty is active.
  
  What can I do? I believe that, if the computer comes with 8, then if HP would provide 8 installation disc, that would solve everything. The recovery partition is not, so I need the complete installation disk.
  
  Or any other solution?
  
  THX,
  Johny.

  Hello

  Looks like the machine shipped with Windows 8.1 so it must have been updated with the windows 10 - this means generally that the upgraded version would be 10 Windows Home 64-bit.

  As long as the installation of Windows 10 has been enabled, the profile of this material should have been registered with the Microsoft activation servers and reinstall the correct version should translate into automatic start-up; but it is version dependent.  Try to perform a new installation with 64-bit Windows 10 Home as stated in the guide on the following link.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Alternatively, you can order a set of recovery media for Windows 8.1 starting on the link below.

  Support of order recovery HP.

  Kind regards

  DP - K

• Tecra M2 - 80GB HD - disk is broken - Windows doesn't start! Help!

  Hello

  I was working with my email using Outlook and just do normal operations, Windows just freeze!

  I tried to restart the PC, but unfortunately it seems that the HD has a serious physical problem.

  I need some data from my rescue disc and I don't know how to do. Do you know if there is a utility that can prepare the HD (those who are not damaged) RAW data and copy it to an external drive?

  Until additional information, I can boot from a floppy disk and I have an external HD which can be connected via USB or Firewire (but I don't know how to get back!).

  Please, any suggestion is very welcome!

  p.s. support people has only offered to change the HD, but they are not able, or by train, to do any activity of data recovery.

  Thanks for your help.

  Giampaolo

  Hello

  First of all, I want to write a small review on your problem. As you know, we have to pay for each service that needs to be done for the user. I am also sure you know there are a lot of stores or services that can save or read all data from broken HARD drive. Unfortunately this service is not for free. If you have a very sensitive and very important data for your business the best solution is to let the professionals to do this.

  If you want to try to do it yourself, it can be very complicated, but you can try. I talked to my friend and he told me that it is possible to do, but you should try to create a bootable CD. With this CD it should be possible to access on an external device like USB connected HARD drive. It gives me a link to an interesting page, and you can try to get some information about this. Check it on http://www.nu2.nu/pebuilder/.

  Good luck!

• DLNA network in windows 7ultimate

  I initially got windows 7 ultimate on my desktop PC and my home network worked well.  To my great regret, I've upgraded to 8 pro. I understand that 8 pro is not compatible DLNA, and after spending countless hours to do what was suggested in the forums, I couldn't get 8 pro to the stream to my TV DLNA wireless connected to my home group. So I decided low grade again. Although I had right to demotion to W7 pro, when I spoke to Microsoft, they told me to do a clean install my W7 Ultimate, I did. After installation, I ensured that my WMP is set to broadcast to all devices on my network, and I made sure my PC is set to allow and to share media to all my devices and is attached to the homegroup. I also have a laptop which is W7 Home premium. Even though my laptop is visible and share its media with my TV, my PC does not work. Whenever I try to access media on this issue, I get the message to the DLNA server not found. I even tried with the firewall disabled, but not luck. All my settings seem to be correct and compare with the settings on the laptop. When I traced my network card, on PC, it properly displays all devices on the network.

  So please, if anyone has any bright ideas, I want to hear them.  Thanks in advance.

  Thank you Anshul,

  I tried plex. After you download it. I could not even run it. Then I tried the divix media server. Which doesn't work anymore. Then I finally understood that she had to be the way that my network is connected. While all of my devices are connected to my network through wireless connection, my PC has been wired via broadbend to my router/modem that was provided to me by my internet server. It's a cisco (dpc3825) router. my internet provider told me that the cabling made no difference. This is not true. It has made a difference. When I connected my PC wireless (as was my laptop), BINGO everything works fine. So to all of you who are having the same problem, check and see if the connection method makes a difference.

  Thanks again for taking the trouble to help.

• My DLNA compatible TV takes a long time to detect the DLNA server on Windows 7 computer laptop via wifi

  I have a Panasonic plasma tv and a laptop running Windows 7 x 64.  I had no problem with the TV detect my laptop and watch movies via the DLNA server in wifi, aside from the videos stopping frequently, loss of the connection and reconnect.  Thinking it was a problem with my router, I contacted the manufacturer of the router and received a replacement of the same router.

  Apart from switching on the router, nothing has changed.  However, when I try to go to the DLNA function on the TV, it will appear the message "DLNA server is not found. Finally, anywhere from 2 to 10 minutes later, my computer appears on its own in the list and I can continue to watch the videos as usual.  The connection seems to be more stable than before because he rarely abandons the connection after the replacement of the router, but waiting for my computer appears mystified me.
  Y at - it is a particular setting in my notebook or the router that should be adjusted to solve this problem? As I said before, I reflected quite well the former router settings so I'm really helpless why it takes so long.
  Oh, and I use Windows Media Player stream 12.0.7601.17514 (as I was before).
  Thanks for any insight of this!
  Tara
  It is a problem of network discovery/master browser, and if you book DHCP
  addresses, as I suggested, you may be able to solve the problem. You could
  you want to ask their tech support for help if not clear from the user manual.
   
  | Finally, anywhere from 2 to 10 minutes later, my computer will appear on his
  own in the list and I can continue to watch the videos as usual.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Want to try 10, irretrievably broken windows update

  OK, Windows update is irreparably broken, it won't work as expected.  If I try to use it, it aspires to 1.5 GB of ram, and flat.  I give up.  Frankly, I just want to see if maybe win 10 will solve some of my hatred for 8, but I still want to give it a try.  I have a bios installed win 8 key, is there a version of win 10 oem who can see the key so I have not try to use the horrible nightmare that is updated for Windows.

  As side note, I know, I know that many of the problems of Windows updates has to do with permissions and missing components, I also didn't need to run antivirus/spy because my system is really secure and I'm not sure it so that Windows can have his way with her.

  (my program files folders are empty, none of my files are owned by the trustedinstaller)

  Hi Jeff,

  Thanks for posting your query on the Microsoft Community.

  I would like to inform that Windows 10 has yet been published. Please check the link below to find out more about the on Windows 10 TP

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See the link on "How Dual boot Windows 10 with previous versions of Windows" below

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-Windows-10-with-previous-versions/9695dfc7-1C13-4D8D-B10B-587e78c6ac36

   

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-10-things-to-do-if-Windows-10-Setup-fails/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  Please do not hesitate to contact us if you need additional assistance, we would be happy to help you.

  Thank you.

   

• SYSVOL broken Windows Server 2012

  I have a DC 2 environment, which is only 6 months old.

  The FSMO server recently suddenly descended FSMO has been forced to the 2nd DC.

  A new domain controller was then created and its now reproduce with the other server but I noticed a major problem now with sysvol

  SYSVOL seems to have broken.

  -dcdiag shows that DFSREvent has failed.

  Everything has passed its test

  -Check the DFS replication event log and saw that the DFS replication service could not communicate with the partner.

  (the question is that this server is now retired due to death)  If this server must be replicating with another server.

  -I was getting a lot of mistakes in DFS with 4612 errors and 5008 so checked on the registry in HKLM/currentcontrolset/services/DFSR/settings/sysvols/seedingSysVols/field and FSMO server, the server of the parent company is the former FSMO server.

  I've changed that on the new FSMO server

  To summarize, it is a disaster and I don't have a backup (do not ask)

  I wonder if anyone can suggest what steps I can take to get the sysvol to reproduce successfully two domain controllers can manage GPOs.

  The only option that all seem to point to is a DFSR Sysvol Authoritative restore

  but it won't work that this server is not configured as I continue to find references to the old server in the registry?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Broken Windows Update

  Windows Update isn't all just white screen loading and saying failed to load the page and that's all I get! Please help me I am running Windows Vista Home Premium! Thank you!

  Please I really need this TY fixed

  Hi EndlessSims,

  There are many references to this error message in this forum. Please find some of the suggestions in the following threads.

  Windows Update - failed to load page
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/b636fd9a-c0c4-4E0B-AF99-ff16550f8840

  Page updated Windows cannot load the
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/8e6340e2-74b7-4950-A467-b9a3f02a0769

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download broken Windows 7 Camera Codec Pack

  Hello!

  I can't get my hands on the Windows 7 Camera Codec Pack. All of the links no longer work, and all I can find is the versions of Windows 8, which will not be installed. It is absolutely vital for the workflow of my company, and I managed to install from this article http://windows.microsoft.com/en-gb/windows7/how-do-i-view-raw-pictures only a couple of months.

  I tried to find mirrors or links to work and can't. Any help is very grateful.

  Tuesday, April 22, 2014, 15:50:13 + 0000, Wilcopshot wrote:
   
  | I can't get my hands on the Windows 7 Camera Codec Pack
   
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26829
   
   
   
  __________________________________________________________________________________________________
  Barb
   
  MVP Windows Entertainment and connected home
   
  My Blog - http://digitalmediaphile.com/
   
  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298
   
   
  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7
   
   
   
  Please mark as answer if that answers your question
   
   
   

• Recycle and broken Windows Win7HP bin file manager

  I broke my Win7HP yesterday...

  The Recycle Bin icon is missing. If I open the file manager, I get the indirect approach of the magnifying glass and no results file!

  I'm not exactly sure how, but I think that it is removing a file that is uploaded to skydrive.  Nevertheless, the net effect on my system is a disaster.

  I tried running the FixIt for questions of funds, but he said that he had no problem.  The system is completely up-to-date, and Security Essentials scans clean.

  Need help please,.

  Thank you.

  The man was extreme, if you know what I mean.  I had to pay Microsoft $$ for help.

  In fact, it took two calls and two interventions to clear.  (still not sure exactly what it was).

  What they have determined is that my user profile was irreparably damaged.  It has to be copied to a new profile, and then deleted...

  In the meantime, they scanned rootkit, malware and viruses.  All clear. (at this time I was pretty sure that must have a possibility).

  After the new profile, I had no any problems.  But the passage is very energetic and has taken a lot of time to 'fix' things as they were before.  Try not to do...

  What he started (in my opinion as a Windows power amateur guy), I was uploading documents to the Skydrive, when I removed them from the desktop computer before transfer was complete. There was some kind of conflict, and things were never the same with the file manager and the trash.

  There you go. Thanks for the help Imran M.

  Be happy.

• Broken Windows w/error 8024402F update

  Hello

  Looks like I'm certainly not alone in this problem:

  When you run Windows Update to my laptop Win 8 newly installed, the process fails almost immediately with:

  --
  Error (s) found:
  Code 8024402F
  Windows Update has encountered a problem
  --

  I have:

  1 cleared out the C:\Windows\SoftwareDistribution folder and allow it to rebuild.

  2. run the Windows Update troubleshooting tool.  When run, it detects problems and specifically says recent updates installation problems - is not fixed. " I reboot and have the same problem.

  3 run sfc/scannow - all checks very well.

  I am at a loss.  Does anyone have any other tips/tricks to try?

  Thank you
  Brian

  Hi Brian,.

  Error 8024402F Code indicates that there could be some interruption when downloading updates.

  Can you share a snapshot of WindowsUpdate.log location C:\Windows

  Thank you

  Sam

• inches 8 broken windows

  A few days ago, I had a problem with my pc. I changed the sata connections to see if it fixed a problem I had at the time.

  Somehow all the programs on the D drive and lost the link I think the windows registry because a few inches are missing, as you can see on the tiles of windows 8. Programs on C, fortunately, still have their thumb. In addition to the tiles, I wonder what else he had effect on when the D drive links are lost.
  
  For the moment, my computer works fine, but really, I would like to know if it is possible to return to this problem.
  Thank you, Joep

  Try to purge the cache of thumbnails

  Open the disk cleaner

  Make sure in the files to delete box thumbnails is checked

  Click Ok

  Rebuild the icon Cache

  Right-click on command prompt and select run as administrator
   
  Type the following command:
   
  C:\Users\\AppData\Local (put your username in where ProfileName is)
   
  Press enter
   
  Type:
  attrib-h IconCache.db
  Press enter
   
  Type:
  Del IconCache.db
  Press enter
   
  Type:
  Start the Explorer
  Press enter
   
  Type:
  Output
  Press enter
   
  Who should rebuild the icon cache

• Histogram on Camera Raw Filter appears missing or broken Windows 10

  Dear Adobe team and PS - CC community:

  Photoshop is run like a dream (and a good one!) under Windows 10.  Essentially, nothing has changed and if anything it's just more fluid and faster on my workstation even.

  There is only one problem that I took, and I have no way of knowing if it is simply caused by PS and 10 Windows, or if it comes to the new nVidia Driver for Windows 10, which I use, or what.

  Symptom and how to replicate: open Photoshop, load and work on an image, using adjustment layers, convert into dynamic object, and then apply the filter Camera Raw.  You will see, at least on my system, that in the Camera Raw filter window, the histogram window is completely black, at least under the general tab.  I think that if you are moving to some of the other tabs, you can get a histogram that is appropriate for them (but I forgot).  At least in the General settings of the Camera Raw window tab, the histogram is just a straight black rectangle.

  Thanks, I hope it will be easy to enter an update soon.

  Here is my system info:

  Adobe Photoshop Version: 2015.0.1 20150722.r.168 2015/07 / 22:23:59:59 CL 1032107 x 64

  Operating system: 64-bit Windows of 8.1 < < Photoshop or something that he uses is detect it wrong!  I'm on Windows Pro 10, 64-bit, the RTM standard version that auto upgraded to 8.1.

  Version: 8.1 or greaterSystem architecture: Intel CPU Family: 6, model: 15, Stepping: 2 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading

  Number of physical processors: 8

  Number of logical processors: 16

  Processor speed: 3000 MHz < < in fact I run it up to 4.3 GHz; This was poorly reported by an Intel interface.

  Built-in memory: 65438 MB

  Free memory: 51071 MB

  Memory available to Photoshop: 59505 MB

  Memory used by Photoshop: 68%

  Space design: disabled.

  Work plans: enabled.

  Multi-frequency 3D printing: disabled.

  HighBeam: enabled.

  Tile image size: 128K

  Image cache level: 6

  Overview of fonts: medium

  TextComposer: Latin

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1080, right = 1920

  Display: 2

  Limits of the display: top =-540, left = 528, low = 0, right = 1488

  Display: 3

  Limits of the display: top = - 68, left = 1920, low = 891, right = 2520

  OpenGL drawing: enabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  AIFCoreInitialized = 1

  AIFOGLInitialized = 1

  OGLContextCreated = 1

  NumGLGPUs = 1

  NumCLGPUs = 1

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. GLMemoryMB = 4096

  glgpu [0]. GLName = "NVIDIA GeForce GTX 970.

  glgpu [0]. GLVendor = "NVIDIA Corporation".

  glgpu [0]. GLVendorID = 4318

  glgpu [0]. GLDriverVersion = "10.18.13.5362".

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = 'GeForce GTX PCIe/970/SSE2.

  glgpu [0]. GLRendererID = 5058

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver = "nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um, nvwgf2um"

  glgpu [0]. GLDriverDate = "20150722000000.000000 - 000.

  glgpu [0]. CanCompileProgramGLSL = 1

  glgpu [0]. GLFrameBufferOK = 1

  glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = '4.50 NVIDIA.

  glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1638-4]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [4]

  glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]

  glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [2048]

  glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [124]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 1

  clgpu [0]. CLPlatformVersion = "1.2".

  clgpu [0]. CLDeviceVersion = 'CUDA 1.2.

  clgpu [0]. CLMemoryMB = 4096

  clgpu [0]. CLName = 'GeForce GTX 970.

  clgpu [0]. CLVendor = "NVIDIA Corporation".

  clgpu [0]. CLVendorID = 4318

  clgpu [0]. CLDriverVersion = "353.62.

  clgpu [0]. CUDASupported = 1

  clgpu [0]. CUDAVersion = "7.5.15.

  clgpu [0]. CLBandwidth = 1.40692e + 011

  clgpu [0]. CLCompute = 1505.89

  Type of license: subscription

  Serial number: 96040697313487534930

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015\

  Temporary file path: C:\Users\Eric\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  C:\, 237.6 G, 130.3 free G

  P:\, G, 73.0 G free 335.2

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Required\Plug-Ins\ CC

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Plug-ins\ CC

  Good good. Interesting... Go to the Camera Raw preferences and disable GPU acceleration. Maybe this will help...

• OTP-780 I can't access to my videos via DLNA files since I moved to Windows 8 on my PC

  Since I moved to Windows 8 I can access is more to my files (sometimes I can see my files but it is not stable and never files...)

  instead of my PC, I can play my files on TV

  Is - my BDP-780 is not DLNA compatible with Windows 8?

  I strictly followed the instructions of Windows to configure my network...

  Hello Nicolas,.

  Welcome to the community of Sony.

  The BDPS780 Blu - ray player is compatible for the streaming of files of Windows 8 computer via DLNA.

  The DLNA function works by using the Windows 8 operating system, if the parameter is set to desktop mode. To work, select the setting in Office mode if you are using the new Windows User Interface (UI).

  Make sure that the firewall on the router settings do not prevent the media server to the client machine.

  Follow the steps mentioned on the underside of the base article of knowledge.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1025380

  If my post answered your question, please mark it as an "accepted Solution".

• loss of internet explorer. Now by default Desktop Icons in Windows Media

  I HIT SOMETHING BY MISTAKE AND LOSS OF THE USE OF INTERNET EXPLORER AND WINDOWS MEDIA HAS TAKEN OVER MOST OF MY ICONS ON MY DESKTOP
  EVERYTHING THAT I TOUCHED WINDOWS MEDIA APPEARS, EVEN BASED ON MICROSOFT. WHAT SHOULD I DO TO GET IT BACK?

  Hi Cynthia,.

  Do you know when this started? If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  If you are unable to access the internet (or even the system restore), tries to boot mode safe mode with networking and see if that helps.  If not, see if you can use a disk recovery or the Setup disk to access the options of recovery in this way.  If you need help, I need to know your operating system, manufacturer, brand and model of your computer, and what drives you are available now.

  If you can access the internet somehow, if you are using Vista, go tohttp://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll to the EXE and click or double-click it to run the program to restore EXE file associations. Once done, do the same for LNK entry. That should restore your programs. If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.  NOTE: I think this is the real answer to the problem and the question in this case, I've rarely seen in combination, is how to perform the procedures with your system in its current state.

  We will check the alteration that may have been caused by this problem:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228).

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If that can't find something problematic (and maybe especially if this is the case), then we will make a thorough for malware check to exclude:

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  I hope this helps.  If not, please repost here: http://answers.microsoft.com/en-us/windows/forum/desktop?page=1&tab=all&tm=1300700638376 for assistance.

  Good luck!