Error in registry 0x800703f9
I'm under Vista but am uping to Windows7, while tring to backup before installing, I get "error register 0x800703f9. Any ideas how to fix so I can save? PS I am backup on disk (E :)
Thanks to the almost computer illiterate.
Tom
Hello
What is the E drive. It's a DVD or external hard disk drive?
You may need to check your hard disk for errors
Check out the link provided and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive if you can. Defective sectors found while making the disk check would result in a loss of data.
You can try to make the backup once the disk check is done.
Tags: Windows
Similar Questions
-
How can I find/recognition and correction of an error in registry?
Netflix messaged me that I needed to re - install Silverlight. I uninstalled the program. When I tried to re - install. "I get the following message:"
Message ID: 1622The Setup log file could not be written. Verify that the Temp folder exists and that you can write to it. "Microsoft support said it was probably a mistake to register? So, how can I find, recognize, and fix or correct an error in registry?
Thank you!
Wayne
Alternatively, you can consider changing the location of the Temp folder, here are the instructions on how to do it: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/change-location-of-temp-files-folder-to-another/19f13330-dde1-404c-aa27-a76c0b450818
J W Stuart: http://www.pagestart.com
-
Errors of registry and junk files
I analyzed my pc and it tells me I have errors of registry and junk files? How can I fix it?
What did you scan your PC with? For most of these programs are only good to extract money from your.
Leave the single register, unless you understand what you are doing.
Use Disk Cleanup to delete unnecessary files.
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
I get a "MGL FATAL ERROR 257.426" (error: open registry key) need help
I get a "MGL FATAL ERROR 257.426" (error: open registry key) need help.
How can I solve this problem?
friends
NTVDM is the program that emulates back and very old windows. There is nonethe reason that the NVidia Control Panel would need this.Registry programs, outside the cause of problems, often have a facility to cancel.Look in the program.Plan to run the restore of the system (type in the search on the start menu) to rollBack to a date that precedes ran you the program.--..--"sam defcon" wrote in message news: 8c6a3fe2-af63-4 c 78-a203-b454e9a5876c...> I get the error message when I run GTA 1...>> and I can't open my control panel of nividia graphics card or play tank combat> without Ntvdm.exe crashing.>>>> Since I ran the Defrag registry BoostSpeed, the MGL error and> NTVDM. EXE crashes.>>> --------------------------------------------------------------------------------> friends -
Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...
Hello mnaveen.kumar,
Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.
HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.
You can try to manually create the key to see if this will help.
Please reply back and let us know if this can help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Failure of a file error message registry
I have a Dell Dimension 5150 (Windows XP) that until recently was working fine. When you turn on now I get the following error message:
STOP: c0000218 (registry file failure). The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing. Beginning physical memory dump. Total physical memory dump. For more assistance, contact your system administrator or technical support group.
Can you help / tell me what I need to do. I'm not particularly computer literate so feel free to give me an idiots guide.
Thank you
I have a Dell Dimension 5150 (Windows XP) that until recently was working fine. When you turn on now I get the following error message:
STOP: c0000218 (registry file failure). The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing. Beginning physical memory dump. Total physical memory dump. For more assistance, contact your system administrator or technical support group.
Can you help / tell me what I need to do. I'm not particularly computer literate so feel free to give me an idiots guide.
Thank you
Hey markandamanda
I'm sorry, but these are vista forums
help for the best possible try reposting in the Sub forum of repair xp
http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads?filter=AllTypes
Walter, the time zone traveller
-
HKEY_CURRENT_USER\Software\Microsoft\Windows Live Contacts\Database
This error keeps occurring on my Scan of the registry - how can I get rid of him?
What you need to get rid of is whatever program you use to make registry scans. In general, they do not work and some are really dangerous (I've seen cases where they did so much damage all the Vista system was to be installed as a clean boot). Do not pay attention to the mistakes that these programs show - they may or may not be true and 'fix' can cause more harm than just leave them alone. Most are not really errors. You risk serious damage to your system if you continue to use any scanner registry, registry booster, Fixer registry, registry repair tool or anything similar. Vista doesn't have these programs - it does a job perfectly well to clean the registry on its own.
Please take my advice and uninstall and never use this device or any other product like it if you care about the integrity and preservation of your system and your registry database.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I downloaded and safety program Internet and a registry cleaner. I ran the cleaner registry and nothing but problems have had since then. Later, my screen resolution resets to the smallest setting and when I tried to access my display settings to change, I got an error message saying:
"This file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "
The top of the said[C:\Windows\system32\rundll32.exe sign]
I need to know another method of changing my display settings, how do I restore my registry, or how to find the program that I need and how to associate it with my display settings.
And now you have a great illustration of why registry cleaners are garbage. And who knows what the "Internet Security" program that you have installed. This looks like a thug. If possible, use the registry cleaner and cancel whatever it was you did. Then search for malicious software.
http://www.elephantboycomputers.com/page2.html#Removing_Malware
http://aumha.net/viewtopic.php?t=28099 - thread registry cleanerOtherwise fix the file association error first. MVP Ramesh - you need restore the .exe Windows Vista file association, after having trouble with another application.
http://www.Winhelponline.com/articles/165/1/MS - MVP - Elephant Boy computers - don't panic!
-
Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes
I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64. I can download and play songs from any site, but can not burn anything. And I don't have any other burning software on my CD PC
Hello PohlCat,
Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.
I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.
Please reply back and let us know if this can help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error creating registry key, RegCreateKeyEx failed; Code 5 access denied
Just as the title says. I encounter and error where a program is unable to create a registry key. Error 5, access denied. I tried as admin and the problem still persists. I tried to run the registry editor and access, but still the problem persists.
For the complete error message:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/MediaProperties/PrivateProperties/Joystick/OEM/V8/AXES/0ID_8888 & PID_030
RegCreateKeyEx failed; Code 5 access denied
I can retry, ignore, stop the program. I run Windows 7. It is a big problem for me because this PC is also to play games, can't really do this without my will.
I solved the problem some time ago btu don't remember how. I think trying to let the program us firewall or try to disable all firewall and installed, I'm pretty sure something along these lines has helped.
-
Blue screen "ERROR in REGISTRY"
I got a blue screen "REGISTRY ERROR" and here are the details of this one:
Signature of the problem:Problem event name: BlueScreenOS version: 6.1.7601.2.1.0.768.3Locale ID: 1033
More information about the problem:BCCode: 51BCP1: 0000000000000001BCP2: FFFFF8A000024010BCP3: 00000000011 TO 3000BCP4: 0000000000000374OS version: 6_1_7601Service Pack: 1_0Product: 768_1
Files helping to describe the problem:C:\Windows\Minidump\021813-15724-01.dmpC:\Users\CeeKei\AppData\Local\Temp\WER-48594-0.SysData.XMLHere is a link of the minidump collected:https://SkyDrive.live.com/redir?RESID=92D7D2B86140AD12! 115 & authkey =! YEAR-VIMKeZ6QHxowI would greatly appreciate any help you guys can extend. Thanks in advance! :)Hello
Welcome to the Microsoft Community and thanks for posting the question. I understand that you get the blue screen on the computer windows 7. Let me help you with the issue.
1. What is the brand and model of the computer?
2. what security software is installed?
3. when exactly you get the blue screen?
4. have you made changes on the computer recently?
To resolve this issue, let us try these methods:
Method 1.
Disconnect any external devices and restart the computer to check the status.
Method 2.
You can read this article to check the status.
Resolution in Windows 7 stop errors (blue screen): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Warning check disk.
Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.
I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.
Thank you.
-
Error creating registry key - PS CC 2015.5
I try to install the update to the CC 2015.5 on Windows 10 PS, and I get the following error in the install.log:
FATAL: Error (Code = 160) the 'SetRegistryValueCommand' command for package: 'AdobePhotoshop17-Core_x64', version: 17.0.0.88
FATAL: An error has occurred in the installation of the package (name: AdobePhotoshop17-Core_x64 Version: 17.0.0.88). Error code: '160'
WARN: Error registry setting - start 64-bit: 1 root: 0 key:Photoshop.ProofSetup\shell\open\command name: Default type: REG_SZ data: "C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Photoshop.exe" '%1 '. Check the registry permissions. (Error: error 5 access is denied.)
I tried the installation through the CC Office application and download the installation file, and it hangs to 74% with this error both ways.
I studied this error, but I don't see any specific solution for this. I searched the registry for "ProofSetup", who brought up a few hits, but I don't know what keys to register to edit and what value needs. All the other new apps installed without problem. Can someone let me know what registry key need to be changed to allow the installation ends?
Thank you
Kevin
Hi Earlskd,
I recommend you to follow the steps in troubleshooting mentioned in the thread below and see if this is useful:
error code 160 "CreateRegistryKeyCommand".
If the problem persists, Veuileez contact our phone/chat support teams, because they can remote into your machine and help.
Click here to contact customer service
See the FAQ below, if it is impossible to reach support via the link "contact us":
Contact the technical support FAQ: Impossible to reach support via the link "contact us".
-
I get an error message, Adobe Illustrator has detected a problem in the windows registry that must be fixed for illustrator works properly you would be illustrator to correct the problem now. How can I fix it, then the dialog box don't appears upwards at the beginning of my Illustrator sessions each time I use the program = thank you for your help.
Run as administrator and let it repair it properly. Or uninstall and reinstall.
Mylenium
-
Original title: Registry loading problem streets & trips
I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution? Russ B, Mt Laurel NJ.
Hello
1. where did you buy the disc?
I suggest you to send your request in the below link.
Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads
Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx
Hope this information is useful.
-
streets & trips error "the registry settings were not copied correctly.
Evertime I try to run Microsoft Streets & Trips, I get a message that says that this registry settings were not copied correctly. I run installation again, but still get the same results
Hello
Check with the streets and the support of the TRIPS agreement
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxpStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Why not download any apps?
I recently got a new iPhone 6s more with no backup iCloud and it works very well. From later last night, however, none of my apps will download. The circles just icon and the circles forever without stopping. I have 64 GB so it is not a question of s
-
Satellite U840-10: cannot configure Intel IRST after the fresh install of Win 7
Hello I formatted my U840 - 10 M and did not touch in any partition in addition to C:\. However, after all drivers installed, I'm still not able to open fast storage software from intel to set up, because just after installing, it does not appear in
-
laptop g70 t200 will be it coonect to the web in Europe and India
If I take my laptop g70 t 200 to Europe and the India can download information via the web? Boy's HP no help to find a place to ask this question.
-
Could not save the WRT54G Router settings!
Recently, I have reset the Linksys WRT54G Router because I can't get the page with a note to "CONTINUE", I used to have. I can also save the new setting. What comes out is a blank page. Pls help me. Thank you.
-
I have a printer all-in-one HP Photosmart 5520, running Windows 7 on an Acer netbook.
I have had this printer for 8 or 9 months and have been printing with this 3 or 4 times a week. I changed the cartridges twice. My black cratridge began printing sporatically and I replaced it with a new cartridge. (it was almost empty) Now, nothing