Transfer multicast through VLANs for KVM Over Ip

Similar Questions

• Multicast Testing tool for windows

  Hi guys,.

  I'm looking for a multicast of MS Windows based downloadable free tool that uses the multicast stream source for listeners connected through the test of test lab MPLS service provider.

  Help, please

  Thanks in advance,

  Anil.

  Hi Anil,

  I saw that iperf has multicast capabilities, so you can give it a try.

  Concerning

  Dan

• VMotion: A large private VLAN or several small VLAN for each cluster?

  Our production of VMware ESX 3.5 environment begins to develop very quickly and since we have different subnets 1,000001 million (bad network design), but all our esxHost Service Console is on the same subnet for accessibility, it would make sense to have VMotion all the different of the pole on a large local network separate VIRTUAL private or private VLAN?

  We currently have 3 clusters running in our production environment, with each cluster serving a different subnet for connections to data and mgmt VMs.  These 3 groups all are currently 3 separate private LAN of VMotion.

  Over the next month we will add an extra 2 groups serving two different subnets.

  So my question is, how is another to tackle this task?  You create a new VLAN separate private for each cluster (which is what we are doing now)?  Or you have created a large private VLAN for VMotion?  If you have created a large private VLAN, what problems met?  Performance problems?  Networking issues?  Collisions of data?  All esxHost panic?  SMV panic?

  Your comments on your experience would be greatly

  appreciated!

  Hello

  I did have problems with a large network of VMotion. Or with cluster of specific networks of VMotion. Note that with VLAN possible external of attacks using the VLAN is a matter of trust as the VLAN do not guaranttee security.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Online transfer of the registration for PC Toshiba laptop

  What is the procedure for the transfer of the registration for PC online Toshiba laptop
  When I bought from a dealer who has already registered in his name.

  Hello

  I think that it of not possible to do it on the Web site.
  I think that you will need to contact Toshiba service partner in your country.

  I think that you will also need a confirmation of the garage which has saved this laptop.
  But EPA should give you more details what is needed.

  The entire base of ASP in the world, you will find on the page of European support of Toshiba.

• Satellite A200-27R integrated microphone for voice over IP

  The description of the product (see excerpt below) for a Satellite A200-27R indicates that the A200-27R has a microphone for voice over IP. I couldn't access it (for example with Skype, Live Messenger, control panel) there's no sign of her external on the computer. Control Panel > Sound > tab says Recording Microphone Realtek High Definition Audio not connected.

  How to configure and use the microphone for voice over IP?

  Features of the Enhanced Numtxpackets® Speedstepa® technology
  SM BIOS compatible
  HD Audio compatibility
  Microsoft® Windows® Hotstarta? ¢ for the entertainment of instant fusion
  Multimedia bar with 6 easy keys (Internet browser, CD/DVD launcher, Play/Pause, Stop, Rewind, forward)
  microphone for voice over IP

  Hello

  The built-in microphone depends on the webcam.
  As far as I know, the Satellite A200-27R PSAE3E was not equipped with an internal webcam and so the internal microphone is not available.

  Try to use an external headset or just simple microphone.

  Concerning

• Hello, I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices. Thank all participants in advance of the availability, I offer cordi

  Hello

  I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices.

  Thank all participants in advance of the availability, I offer cordial greetings.

  Post edited by: andreava

  No preference, but there is a solution. See moving backup iOS device. See the rest of the tip of the user to do a split cell library if the library files and the media folder are on different drives.

  TT2

• Hard disk and transfer of external tools for my dimension 2100 that are reliable?

  Hard disk and transfer of external tools for my dimension 2100 that are reliable?

  Hi chucksmack,
   
  -What exactly is the problem you are having?
   

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time to ensure that you have included all the information required and we will try to help. »

  See this link for more information on:

  How to ask a question

• Implementation of VLAN for wireless AP with two SSID

  I am trying to install a RV180 and 3 wireless access points. I want that the AP is having 2 SSID isolated from each other. IE comments network and core network. I have setup a VLAN and my AP support 802. 1 q and ssid matching of VID. I could get this background work, but things seem to have gotten confused when I plug a POE switch instead of directly in the rv180 of the AP. At this point I don't know exactly what to ask. Perhaps start by providing information based on how I'm supposed to do. I was under the impression that since both devices are supported 802. 1 q I could configure the VLAN on the router and tell the AP to apply a VID of the SSID and thing would work. This is not the case unfortunately. Any help would be appreciated.

  Aaron Hi, depends what's this switch. If it's a unmanage switch, it cannot process tags vlan so the switch will only be a member of the vlan native who is connect from the router.

  If it is a switch to manage, you must configure the same as the router, a vlan native UNTAG, tag vlan for the connection to the AP and router port.

  -Tom
  Please mark replied messages useful

• Cisco ISE 1.3 - Mab authentication with a vlan for each foor

  Hello

  A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc

  I have set up the following:

  -the profile of different authentication with a vlan different.

  -Add the endpoint (printer etc) endpoint identity.

  -create endpoint group identity that end point of recall.

  -create a rule to authorizzation reminding all work and element... in the end.

  Do you know if there is a faster way where another way to solve the problem?

  Thank you all

  Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.

• Change of ISE of the VLAN for wireless settings

  Hello

  I configured on ISE posture strategy for posture compliant and noncompliant to endpoints, such that endpoints compliant posture will fall in VLAN clean and not conform will fall in others.

  Now, my question is, even if an end point is consistent, it is not in VLAN own posture. To get the ip address of VLAN, it requires enough ipconfig and ipconfig / renew to do manually.

  How to solve the problem...

  Kind regards

  Aditya

  If you assign a VLAN, the final step for the PC client to renew its IP address. This step is performed by the portal of reviews for Windows clients. If you have not defined a VLAN for the 2nd AUTH rule earlier, you can skip this step.

  If you have assigned a VLAN, complete the following steps to enable the renewal of the IP:

  1. Click Administration, and then click comments.
  2. Click settings.
  3. Expand comments, and then expand Configuration multi-portail.
  4. Click DefaultGuestPortal or the name of a custom portal that you created.
  5. Click the DHCP Release VLAN check box.

• Can't access ESXi host after VLAN for MGMT has been implemented?

  Hello

  We run ESXi 5.1 and recently to get our network

  Network administrator has received only 5 VLAN for MGMT vSwitch.  Since then, we are not able to ping on the ESXi host, or access in vCenter.

  He received different VLAN for vMotion and vSwitch and VM.

  Just would like to ask your advice what changes I need to do?

  Hello

  That doesn't sound right. You have 3 different vSwitches with 2 ports on each, so you can not the team together on the side of the switch.

  This would have been right if you had a vDS with 6 uplinks and various exchanges by the feature that you do not.

  You have need of the network is to set up 3 different teams one by vSwitch and to start with that you have the management must be in the access mode so that you can retrieve with your ESX box connectivity.

  Also the vMotion didn't need to be mode trunk you'll only of vMotion. Data (VM) must be master.

• Configuration of VLAN for vMotion (ESXi 5.1 update 3)

  Hello

  We use a cluster of ESXi 5.1 updated 3 guests with Enterprise Edition.

  Finally, our network is being upgraded and VLAN will be created for vMotion.  Currently, we use the local network for the management and vMotion (I know that's not good).

  Network administrator asks me to provide information concerning the requirement of the VLAN for vMotion.

  Is there any Document KB I can refer to mentioning that the administrator must put in place in the physical switch and I need to change in each vSwitch for vMotion on all ESXi hosts?

  Thank you

  Belong to your network administrator if it can link your vmotion IP to the same vlan that he will provide den it's possible.

  Otherwise, you will have to go to the configuration of your network administrator. so it can provide you the IP for the ports of vmotion.

• I already have 5 Lightroom downloaded on my iMac. My computer is mess up and I need to buy a new one. Can I transfer my already paid for L5 to my new computer somehow without having to buy the program again?

  I already have 5 Lightroom downloaded on my iMac. My computer is mess up and I need to buy a new one. Can I transfer my already paid for L5 to my new computer somehow without having to buy the program again?

  Hi Cayley,

  You can download and install Lightroom 5 on your new computer by using the following link: Download Photoshop Lightroom

  Kind regards
  Rahul

• What products are available through CC for students?

  What products are available through CC for students?

  Hello

  Please see:-officeAdobe Creative Cloud | Adobe Creative Cloud

• problems with office 2010 excellent file transfer and documents word for os7 through a USB stick to vista with office 2003 operating system

  Download excel and word files from my laptop with os 7 and office 2010 on USB but when I transfer it to laptop office which has the os vista and office 2003, they all open with gobblygook

  The native formats for word (.docx) and excel (.xlsx) are not compatible with Office 2003.  You need to either save AS Office 97 - 2003, in 2010, or you can install the Office Compatibility on your Vista machine.

  Microsoft Office for Word, Excel, and PowerPoint File Formats Compatibility Pack
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3