Transfer of permit

Similar Questions

• easy transfer file permissions deny access

  I used easy transfer to move the files from xp to win 7 computer. the files transferred but refuse me access, even when I change the full security permissions. What should I do to restore the full permissions on my files transferred?

  Hello

  1. What is the error message you get while trying to access the files transferred?

  2. how you try to access the files transferred?

  Method 1.

  You must use the Windows Easy Transfer Wizard to open it. Click Start, type Easy Transfer and press ENTER.

  Follow the wizard to display on.

  Method 2.

  Ownership of a file or a folder:http://technet.microsoft.com/en-us/library/cc753659.aspx

  Refer.

  Windows Easy Transfer: http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  I hope this helps.

• Transfer of permit student CS4 on a new computer?

  I bought a student for CS4 Design Standard (Mac) license in 2008. I recently got a new computer and want to transfer the license from my old computer to the new (I graduated from). Is it possible to do so and if so, how?

  Don't need/want to transfer.  Just install it as you did initially.  If you need a trial of the following download link:

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You are allowed to have two facilities enabled, so if you want to keep a backup installation, you can keep it on the old machine.  If you would rather disable/remove it from the old machine, then you should be sure to turn it off first (open any program and choose Help-> Deactivate)

• Unable to repair the permissions of the library!

  Hello

  I'm pulling my hair out trying to restore access to my library of Photos...

  My photo library is located on a Synology NAS. After update macOS Sierra, I would lose permanently the connection to my NAS. Someone on another thread said to use SMB instead of the AFP for file transfer services. I did, and the connection has remained stable; However, since any attempt to open the pictures gives me an error message "repair permissions Library" and wrote "this library is locked or you don't have permissions to make changes. Photos can try to repair the permissions'.» I try to repair the library, and after about 20 minutes, I get "error repair permissions.

  Finally, I opened the console to see what was going on, and that's what I saw when the error occurred:

  Library Permission repair failed: error Domain = RKRepairLibraryPermissions Code = UserInfo '(null)' 3 = {NSUnderlyingError = 0x61800025ecf0 {error Code Domain = com.apple.library - repair.error = 4 "(null)"}}

  If anyone can decode this to give me a clue as to what is happening and how to fix it? Or is there any other suggestions?

  I would appreciate any info at all...

  See you soon,.

  Chris

  Vancouver, BC

  My photo library is located on a Synology NAS

  Photos is not compatible with the NAS volumes.  Photos libraries need to be located on an OS X Extended (journaled) formatted volume.

  So, copy the library on a volume formatted correctly and open it with Photos.  You may need to repair the library by launching it with the command and Option keys.

  

• Unable to transfer backup TM to a to an another DHM DHM

  I use an iMac 24 "(early 2009) / 2, 66 GHz Intel Core 2 Duo / 8 GB 1067 MHZ DDR3"

  My internal HDD 640 GB and I use a DHM Lacie Minimus 2To for backup with TM since 2012.

  My iMac runs OS X 10.11.6

  My internal HDD is running out of space, so I intend to use my EDH 2To for usage of storage and backup TM, I bought a new 4 TB Lacie P9233 DHM.

  Therefore, I am trying to transfer my backup old 2To JEP JEP 4To again TM.

  The two DHM connected directly (without external hub) by USB2 to the iMac.

  Both are in Mac OS extended (journaled) format with a GUID partition.

  I tried several methods that all failure: (note: between each test, I deleted the new JEP with disk utility application)

  Method 1-Apple support - Time Machine: how to transfer backups from a current backup disk on a new backup drive - Apple supported

  Correctly formatted new EDH - OK

  Permissions "ignore ownership on this volume" unchecked (disabled) - OK

  Drag the folder "Backups.backupdb" from the old to the new SMT - OK

  Process begins with the preparation of the version and the file count. My TM backup is about 1, 44pour.

  After 24 hours, the process was still approximately 2,000,000 files, always growing number.

  I tried three times and stopped manually after all 30hours while the process was still count files and no copy began.

  2 - using disk utility

  Disabled TM.

  Disassembly - Assembly new old EHD "Backup."

  I tried to restore to new drive (target 'Storage') with the old disk (Source "Backup") with the disk utility application

  There is also no, see below (in french, sorry):

  New drive (Lacie P9233 - 'Storage')

  Old car (ST2000DM - "Backup")

  IO error

  

  I also tried the spirit of several times the same result.

  3 - use of SuperDuper! 2.9.1 (v98)

  This seemed to work, but not completely.

  Disabled TM.

  Disassembly - Assembly new old EHD "Backup."

  I tried "Backup - all files" / copy of "Backup 2.0 to ' to ' storage 4.0 to."

  The process started successfully: new drive erasure, counting and copy the files at the same time.

  After all 36Hours, it stops with a few errors of files not copied.

  

  About 200,000 files - not copied 450Mo (?) (The backup log file) , but the main question disappointing is that only 1, 12-1, 44pour have been evaluated and copied by Superduper!.

  Looking at the two DHM in Finder, I discovered that all the folders inside the "Backups.backupdb" who were after a certain date (20150908) are not copied at all.

  

  

  I suspect that these missing backups are one made with a new OS X (maybe El Capitan?) which is not compatible with Superduper!  2.9.1 (v98).

  Can you help me to achieve this transfer of backup to new SMT TM?

  I sent the log file of SuperDuper in support.

  Their recommendation is to delete the damaged file, and then start the backup again or with the SmartUpdate feature to continue the backup.

  That's what I did:

  -find the corrupted file in the log file.

  -delete the file with TM. Enter TM, then navigate to the file, and then remove all copies.

  -start to SperDuper! Once again (Smart Update)

  -everything is now OK.

  Hope this can help others.

  SuperDuper! helped me.

• How can I give the permission to open the files after a complete transfer of an MBA

  I transferred my old macbook 2008 an MBA from 2014 and user files cannot be opened because I do not have permissions. How can I give permission - I'm the admin.

  The usual way to transfer content to a new Mac is to use the installation wizard: move your content to a new Mac - Apple Support. Which warp any permissions issue that can come from other file transfer methods.

• Question about the migration of mass of files and permissions

  Hello

  I'm moving 2TBs of files from one external hard drive to another, but every time that I try to do a file mass transfer from one day to the next it eventually fail due to permissions for some files. I looked at the files on that he objected and I read and write permissions on them, as you would expect.

  What can I do to fix this?

  Try to run repair permissions and ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• Transfer

  I tried to the xfr my v. 9.1.8 program to a new MBP using the target of the disc (that is the correct term for it?) without success. I get the following:

  When I entered the S/N for the update, it is always rejected. And even when I get the original S/N which is also rejected.

  I'm pretty frustrated and I have no idea what to do next.

  Hi curly

  There could be several reasons you cannot correctly install LP9.

  Do you still of the original disks, or purchased through the App Store? These methods can provide a better and clean install. If through the App Store, you can just go to the purchase and redownload the app. Even if you have updated the program here in the past, you will be able to use the App Store. Make sure you use the same Apple ID account that the app was bought in virtue.

  You don't say what version of the OS you want to transfer to El Capitan of. This can create problems.  MacOS and structures of default folders and permissions have changed over the years. Move license protected apps has always been problematic when you use slide it / move. A few hidden files can not move. As the structure of the files changed, it gets worse.

  Another thing with CBS's new SIP security. Believe it or not, the same old programs Apple are not recognized as a developer of trust / identified. Go to System Preferences > Security & privacy and change the "allow Apps downloaded from...". "to"anywhere ".  Then try. Do not forget to change this setting back later for security reasons.

  Hope this helps, Greg

• Permissions on removable SD card Android AT200 value read-only

  Recently, removale on my at200 SD card has been set to read only for the applications of all but a few. This means that when you change or try to save, copy docs on the SD card, I get the message "not enough of permissions. Any amendment of these applications requires transfer of files on SD card and back again.

  Toshiba queue manager is able to rw OK, but my other file manager fails, along with ezy PDF.
  Read the attributes of the issuance of the RW value for data.p (permissions XML) SD card. But looking at the poster file manager information sdcard directories and files value dr - or - r-.

  Is it possible to get this changed to allow access to all of my installed applications? Or even some?
  See you soon
  RABEL

  Hello

  Reading your post, it seems that your question has nothing to do with AT200 material, but with the permissions that are defined in unique Android applications.
  I think you should check the Android support forums for more details on the unique demands and how to change the permissions for these applications.

• How can I create a new admin user and transfer my old files?

  Hello

  I want to create a new account administrator user on my imac and transfer all my old files.

  Why? I have problems with adobe lightroom. I can't move the files from one folder to another; After a chat session of three hours with support from adobe, they discovered is not the lightroom catalog that causes the problem, the preferences file, nor permissions user/disc; so it's probably a problem with the user account is corrupted. They tried with a new test account and everything worked fine. So they suggested, I create a new user account and transfer my files.

  I read on this forum that move all the files from one user account to another, means you also move the files at the root of the problem. So before you do anything: what are the thoughts of the community here on the suggestion of the adobe support the people, and if this is the right way to go, how should I go about this?

  System: imac 2.7 Ghz intel Core i5, 16 Gb 1600 Mhz DDR3, Mavericks 10.9.5, Lightroom 6.4

  THX in advance

  Robin

  Open the preferences users and groups. Click on the padlock icon in the lower left corner. Enter your administrator password when prompted. Click on the [+] add at the bottom of the list of current users to create a new account. You can set the account to an admin account by selecting the new account administrator: drop-down menu. Set up as a result. However, you can't use the same user name, in order to transfer your data presents a problem with permissions. See the following article: transfer of files from one user to another account. Once you get set up in the new account, you can delete the old.

  You shouldn't have a problem to transfer files of key records in your file. Just do not transfer anything from the folder/Home/Library/because that's probably where the shoe pinches.

• I can't transfer my library of Photos to another user

  I need to transfer my library of Photos to another user. When I tried to open my library in the application of the users Photo I received the message "error cannot repair the permissions. I then used GetInfo to change permissions on the library so that the other user had the ability to read/write.  Attempt to open the library then got the same error message. The library is too big to put in my available cloud storage.  How can I do this?

  Attempt to open the library then got the same error message. The library is too big to put in my available cloud storage.  How can I do this?

  Put the library on an external drive, where you can set the indicator "Ignore ownership on this volume" for the reader.

  Use a disk with the file system 'Mac OS (journaled)' extended.  Open the Panel "file > read the information" for this drive.

  In the section "Permissions & sharing" Panel Info unlock the padlock and turn the meter of the property to ignore.

• How to transfer/file sharing of a box to another

  I have 2 boxes RN102 and I am looking to transfer to box 1 folder 1 to zone 2. I want to make it work with using my laptop as the man in the Middle for data and I am new to all this.

  I have set up the FTP and installed MonstaFTP thinking that he would let me connect to a box and download on the other but that didn't work as I thought.

  Any help is welcome.

  Thank you

  OK, I got it...

  the original post said to configure the backup in the Inbox. That's where the mistake was made... it should have been a relief from the Outbox.

  I tried to reset the permissions when you perform the backup from the Inbox... Did not work. Once I have install the back-up of the shipping box, everything worked great by NFS

  Then... Mission accomplished.

  Thank you!

• Of NI 9802 FTP file transfer

  Hi all

  I am trying to transfer files from data stored in a module NI 9802 (using maps of SD Transcend 2x2gb) mounted on a cRIO 9074 I am facing a problem, very frustrating with my FTP, TCP/IP connection. I will try to be as complete as possible.

  First of all, I know that I can save the data successfully in the SD card as I have full access via ftp://xxx.xx.xx.xxx/u :/, where u is the drive letter assigned to my card. While the ftp windows Explorer I can read, save, move, delete the files in my SD card with no problems at all.

  My problems when I try to do it programmatically using the intermediate features of Labview 2009 FTP. I have attached my test screws for your attention.

  The RIO.vi (running on my cRIO) is the mounting of the SD card, then waits until I press the stop, without disassembly of the map button. I'm pointing this out just to show that the Board IS mounted, while I'm trying to tranfer my files. The host.vi is one running in the local pc and is used to transfer my files via a TCP/IP connection. I put passive FTP connections (had this problem of the active-passive front). I'm in this VI after that I ran the RIO one... Note that while the RIO vi mounted the SD card, I can perform easily all kinds of operations on files in the SD card either windows FTP FTP MAX.

  My host.vi works very well when it comes to list just the files in my SD cards (using, FTP directory list VI, see attachments), however, if I try to copy my files (using FTP retrieve several VI, see attachments) from the SD card to my local PC, I get the following error.

  Error 66: Retrieve the TCP writing in NI_InternetTK_FTP_VIs.lvlib:FTP Command.vi:4-> NI_InternetTK_FTP_VIs.lvlib:FTP [TYPE] .vi-> NI_InternetTK_FTP_VIs.lvlib:FTP Open Data Connection.vi-> data NI_InternetTK_FTP_VIs.lvlib:FTP Receive.vi-> .vi [RETR] NI_InternetTK_FTP_VIs.lvlib:FTP-> NI_InternetTK_FTP_VIs.lvlib:FTP Multiple.vi-> Download_files_from_RIO.vi

  I searched for this error and people seem to be agree that this error is related to TCP/IP in Windows connection problems... Apparently, windows try to establish a connection, but after not get back all the data for a while they cling. However, why am I able to list my files without a problem?  

  It has to do with permissions? If Yes, then how I can change permissions for SD cards options in the NI 9802 module. Your help would be very appreciated...

  Thanks a lot for your time,.

  Harry

  Hi Mike,.

  Thanks for a quick reply. I just managed to solve my problem. I don't know if it was because of your suggestion. Here's how I solved it.

  Used for working with the intermediate FTP functions, I don't even worth as audit - is those. So basically using the 'library' FTP get several files function I now have a fully functional system. For future reference I added my final vi. Note that in this VI I'm everything first transfer my files using the library function of FTP files and then I use the sequence FTP intermediate FTP Open - Logon - delete files - FTP close to get rid of all the files in my card. For some reason, delete the works this way; but copy them does not...

  Thanks again, Mike.

  Harry

• Transfer data with datasocket read and FILE protocol in LabVIEW

  High,

  I'm trying to transfer the ASCII file with datasocket read function by using the FILE protocol. It works for files on the local machine, but does not work for machines on the network.

  What is a good sequence for data transfer on the network?

  THX

  Trajan

  Simply boils down to permissions on the file. I did a shared directory on my local machine and it worked fine with a colleague.

  [For example: file:\\ \ToBeShared\SineData.txt[text] where I have a shared folder on the directory. It could also be the firewall.

• Why Windows 2008 R2 Server Foundation has received limited permissions?

  I install a software of SAP on a Microsoft Windows Server 2008 R2 Server (Foundation Edition) on a HP Proliant server.

  The installation fails to access to the registry key 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi '.

  The exact error message is "unable to open silsvc. An error prevents opening this key. Details: access denied. »

  When to use REGEDIT. EXE to display the registration key, it reports that access is denied to view properties (not to mention changing permissions).

  Why this registry key entry is locked against the administrator?

  What can I open as long as the user TrustedInstaller?

  Alternative workaround?

  Concerning

  Joe Oppenheim

  Hello joppenheim,

  You question would best address in TechNet for the Windows Server 2008 forum.
  Click here for a link to transfer your question in the TechNet forum.

  They have Windows Server experts who will be able to help with your problem.

  Thank you

  Marilyn