Ubuntu on Satellite P200 - bad 1C2 Display Mode!

Similar Questions

• Can I use non-Toshiba Satellite P200 - 14H on display driver?

  Can I use display driver other than the driver from Toshiba support page?
  I recently got a massage from microsoft solution centar who recommend me to visit the AMD web site to find the most recent driver.
  So I wonder if I can get my license with ordinary, non-Toshiba driver and that I could possibly get or lose with it?

  Hello

  You can use it but only at your own risk.
  The non-Toshiba graphics card drivers are not tested and don t support protection against overheating which contribute to avoid a damage due to higher temperature GPU.

  The non-Toshiba graphics card driver must be installed in the Device Manager.
  Then, use you an advanced installation procedure and can point to the driver files, stored on the HARD drive.

  Welcome them

• Why the AHCI mode is disabled in some models of Satellite P200/205?

  Hello.

  My laptop model is Toshiba Satellite P205-S6277 (PSPBGU-00W016B). Chipset Intel 945 PM Express, Intel 82801 GBM (ICH7-M).

  According to the information of the intel.com my laptop processor / chipset are fully compatible with the AHCI mode. But my SATA controller works in IDE compatibility mode and there is no way to enable AHCI SATA mode in the BIOS.

  So I have two questions correlated.

  1. why this AHCI mode is completely disabled by the BIOS? Is it possible to activate this mode in future versions of BIOS?

  2 If this mode is completely disabled by the BIOS in the models of laptop of all PSPBG and PSPB0 then why Intel Matrix Storage Manager (driver that improves the functionality of the AHCI mode) is available at downloads driver recommended for these series of laptop on sites European Canadians, Toshiba and even specially for my Toshiba laptop model on the site?

  I already posted the same question to the site we Toshiba but unanswered for a month.
  Maybe there is someone who is able to answer this question?

  >.. There is no way to enable AHCI SATA mode in the BIOS.
  How you tried to activate it exactly?
  I have Satellite P200 and the two modes are available. I have model laptop but can not imagine that the AMERICAN models, or models even Canadian work on a different path and BIOS must be the same.

  Toshiba service best place where you should ask for help. Call them and ask for explanations. If you are right and the AHCI mode is unavailable, they know why.
  Over the past 3 years I have worked with 4 different laptop models and all have absolutely identical SATA settings.

• Bad display on Satellite P200

  Hello

  My P200 under Vista has a terrible display, all the fonts are blurry and in general, the view is terrible.
  I tried to change the display settings of but nothing seems to make any difference.
  All of the suggestions.

  Thanks in advance, IanB

  I use the Satellite P200 almost a year now and all I can say is: use recovery media, install the original recovery image and be happy. I don't know how long you use your P200 and as you have driver display, but for your problem, I have three explanations:
  -You use some bad graphics driver
  -L' display is faulty or
  -You need glasses

  Please don't be crazy for my last comment. It has nothing with your person directly. I just wrote about my own experience. Satellite P200 has the glossy LCD screen brilliant (TruBrite) and using the standard display (1440 x 900) resolution image on the screen is quite clear.

• Satellite P870: Game that the Hunter does launch - no proper display mode

  Hello

  I have a Satellite P870 I just upgraded to 8.1 of Windows and a game I play called theHunter launch now.

  When I run the launcher it comes up with an error saying "No. appropriate display Modes.
  It worked fine on Windows 8.

  TheHunter support has not been very useful and well try a number of different things, I can't seem to solve this problem. I have also contacted Microsoft but got a call in as soon as they have been busy!

  Any suggestions as to what could cause this problem and how to solve?
  Thank you.

  I don t play this game and cannot say what may be the problem. To be honest, this message is not unclear to me. I use Win8.1 too, but so far I n t see on my laptop.

  Try asking this Question on hunter forum http://forum.thehunter.com/index.php
  Maybe someone will be able to help you.

• Weird display on my Satellite P200 - 1 g 8 problem

  I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
  After that switch on and work for a few hours, the display is corrupted, or you can say distort.
  It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.

  I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
  It is not overheating issue.

  If someone knows about it or anyone can help with this, thanks in advance.

  Thank you
  Cecile

  Hello

  To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.

  Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.

  This occurs if you use a specific application?

• Satellite P200 - some web pages are not displayed properly

  Hello

  I have a laptop Toshiba Satellite P200 with Vista home premium
  I use a wireless connection

  A few weeks ago that some pages on the web incorrectly displayed as e bay, face book, Amazon I did a virus check etc. no joy.
  I did a diagnostic test and results said "failed test network!

  I looked in Device Manager and under network there is a driver called ADAPTER ISATAP on right click that says that it is working properly.

  It seems that this could be the problem. Could I delete this driver and download it again?
  Could someone offer advice on this subject any comments would be more useful

  Thank you
  Jez

  Hello

  Devil, please this Microsoft document http://support.microsoft.com/kb/932520
  What do you think of first sentence: you can ignore this error message?
  Very funny! ;) What do you think?

  What happens if you remove it from Device Manager and reboot your laptop?

• Need to go XP Display Driver Nvidia GeForce 7600 for Satellite P200-143

  Hello

  I started my P200 - 143 Toshiba Satellite Vista double. But I can't find the NVIDIA drivers on the site Web of Toshiba. I tried many downloads of the nvidia Web site, but no one has been installed properly resulting in the flicker of screen on XP.

  Kindly let me know the location of the driver to download the existing drivers from nvidia works perfectly or there is no particular sequence in which the drivers will be installed.

  Any quick response is highly requested, please.

  Kashi

  Sorry, buddy, but I don't quite understand you.
  You have P Satellite P200-143 with model number PSPBGE-xxxxxxEN.

  So what you need to do is to visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So what you need to do is to choose the right laptop model:

  Type of portable computer product
  Familly Satellite
  P series Satellite products
  Model 0 Satellite P200 (PSPBG)
  Model short No. PSPBGE
  Windows XP operating system
  Type display driver driver

  SEARCH

  Nvidia 8.4.0.0 display driver version will be listed as a result.
  I think that Toshiba has tested this driver and it should work properly. Of course, if you install the correct version of Windows XP Home (SP2 of Windows XP Home edition) and other things following the Instructions of facilities document.

  Good luck!

• WXP need display driver for Satellite P200 (PSPB6)

  Hello

  I can't find the display driver for Satellite P200 (PSPB6)!
  I have installed Windows XP Home edition, downloaded all the drivers, but why is there no display driver for Windows XP Home edition?

  Can someone help me with the problem? I googled for hours.

  Obnoxious

  ATI driver display for your Satellite P200 (PSPB6) you can find HERE

• Satellite P200-where is the switch that makes display to turn off?

  Hello world

  I have a Toshiba Satellite P200, there is a problem with the display, it works and it doesn't work.

  I did some checking, the backlight is turned on, and it works well with a second monitor.

  The question I really want to ask, where is the switch or contact on the lid or the body of the laptop that stops at the screen when I close the lid?

  I have the laptop stripped down and I see there, not anywhere, where there is some sort of mechanical or magnetic contact between the cover and Palm rest.

  I thought he got me something where the lid locks close but can't see anything there.

  I know that there must be something that puts the laptop into hibernation when I close the lid, but the sensor or another location.

  see you soon

  Spike

  I think that the sensor is part of the motherboard, but can't tell exactly where he might be.
  But as far as I know that the JP9 (40pin) is used to connect the screen.

  However, in my opinion this is not a sensor delivers
  If something is wrong with the screen, you may need to replace either, FL inverter, LCD screen or check the connection between the screen and motherboard

• Is satellite P200 - 1C2 (PSPB6E) 64-bit Windows 7 compatible?

  Hey guys,.

  I got a question here:

  I tried to find the drivers for my Satellite P200 PSPB6E and I found almost everything, but there is no PPV for the 64 bit version of Windows 7...
  I tried the the satellite P500 series VAP and it works more or less, but the FN-Hotkey button bring up flash cards! (it's my major problem, so if I could solve this one, what follows is not so important)

  So my question is, is it possible that Toshiba will provide a PPV for Win 7 64 bit or is more than portable just for old and is not compatible?
  Or y at - it another way to get these drivers I need for those funktions?

  Thank you guys!

  Welcome,
  Rough

  As you know Windows 7 is already a lot of time on the market and if Toshiba has no Win7 64 bit stuff has offered so far I don't think it will happen in the future.

  What you have done is just. You can try one last thing, find utility support Flash Cards for another laptop model and try to install it on your Satellite P200.
  I'm not sure this will help, but you can try it.

  Also check the settings of flash cards and enable the option allow the mouse to show the cards. Perhaps this option will help you see flash cards using the mouse pointer.

• Satellite P200 - 17 c - freezes at loading Vista

  Hi all, I have the following system:

  Satellite P200 - 17 c
  Intel® Centrino® Core 2 Duo Processor T5450
  Genuine Windows® Vista® Ultimate Edition
  DVD Super Multi (Double Layer) drive
  2 048 (1 024 + 1 024) MB
  17.1 "Toshiba TruBrite® WXGA + TFT display

  The issues I'm having is that when I start the laptop, it freezes at the loading bit Windows Vista. I so can't further.

  I did some research on the internet and he advised removing the DVD drive, and then start the laptop. I did and he'll actually past Windows loading, but then the screen turns white for a while, eventually he'll in CHKDSK - here it always freezes at 31%. I was able to access the Advanced Boot Options, but it freezes trying to get into Safe Mode. I don't have a disc of recovery at hand, however, I have a Vista OS disk, I can also access the BIOS.

  Please indicate how should I proceed? Thank you

  Hi masave,.

  If your laptop also freezes if you enter mode Windows safe, it seems that the OS is confused upward and you probably have to reinstall

  In your case, I'd do a recovery facility. You can use the function of your laptop HARD drive recovery. Go to the advanced Windows (F8) boot menu and select Repair my computer. The installation of recovery will begin now.

• Graphic problem on Satellite P200-13Z

  Hello

  Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
  Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

  Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

  System has 1 GB of ram - updated 2GB with no difference.

  When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

  How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

  You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
  If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
  All with images is not so simply as you think.
  Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
  I mean you pay a license and install on 10 laptops. You understand what I mean?

  If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

• Graphics problems in World of Warcraft on Satellite P200-123

  I bought a Satellite P200-123 to surf the net, play and for general use. I have read many reviews and chose the p200-123 because of his good grades. I play wow on a daily basis. World of Warcraft was an extension called burning crusade that came out a couple of years. When the expansion of BC the grx will all mess. Its as if there is a new effect of grx etc which does not agree with the toshiba range drivers. I get lots of polygons on the screen after being in the Burning Crusade expansion. I thought the grx was defective, so I exchanged it. Once again when I get the new laptop at home it happened again. It is a driver problem that it happens to the expansion of the BC. Ive tested it on other games and everything works fine. I want to know is we're going to have a bad selection of drviers or will they get updated.

  http://I219.Photobucket.com/albums/cc215/maltonbranch/WoWScrnShot_033108_213654.jpg

  To solve this problem, I have to change the resolution, then back to the setting I use. problems with polygons etc seems to leave for 5 minutes then the pips apear. I thought he could heat or a damaged GPU. But getting a laptop brand new just to do it again shows me his non-defective material and a driver problem.

  Ive posted this on world of warcraft forums and aparantly its a problem with the ATI driver toshiba shut down. Bottom line, I want to know if the drivers will be updated and not just old ATI modded those of toshiba. I feel ripped off the coast. In all my years of owning PCs and laptops, I never felt so disappointed by a company in terms of software support.

  Hello

  I understand you completely, especially when you play with a few new engine that requires pilots who work quite at 100%.

  Maybe you should check some 3rd third-party drivers.

  This driver have been adjusted for mobile systems, so when you try these, your problem should go away and performance are expected to increase a little.

  Welcome and good luck

• Re: Vista doesn't show log on screen - Satellite P200-1K9G

  I have a Toshiba Satellite P200 1K9G.

  When I start my laptop, watch the boot screen, then the Vista loading screen displays and then not much after that, sometimes, I get my mouse cursor appears, but that's all.
  I can't open a session, because the log on screen simply does not appear.

  I fear that this may be a hardware problem... rather than a problem with Vista, although I have not made major changes that should affect the way it starts. I did however, download the latest ATI drivers, but after a reboot, it doesn't seem to be a problem.

  In addition, my laptop recently started producing a static sound if no sound was produced through a program, i.e. iTunes.

  I tried to start in Safe Mode, but my knowledge of computers is limited, can someone help me?

  Kind regards
  Trib

  Hello

  You can try using the Advanced Boot Menu.
  If you press F8 immediately after that the laptop was turned on then an advanced boot menu should appear offering boot options more.

  One of the options should be the last known good Configuration (Advanced)
  Check if you can use this option.
  More details can be found here on this page of MS:
  http://windowshelp.Microsoft.com/Windows/en-us/help/f9c50a72-04EC-4088-9fd4-a4f979eef5a71033.mspx

  But in the worst cases, the laptop must be recovered again.