Transfer rate between ESXi host using "Veem backup and FastSCP".

Similar Questions

• As part of the SAR cert is to have a NW separated between ESXi host required for VMotion or is it OK to use IP for VMotion management, in the execution of Certification tests.

  As part of the SAR cert is "have a NW/dedicated separate between hosts ESXi (on which we GOS) mandatory for VMotion or is - OK to use IP for VMotion management in the execution of Certification tests.»

  Note that the verification passed Test when you use management IP for Vmotion and without a dedicated connection to NW between ESXi hosts.

  Separate dedicated network interface cards preferred. No problem with the test after this change case.

• Manage an ESXi host using vCenter Server?

  I understand it is possible and requires of the specific licenses for ESXi hosts, even if I find information on the VMWare site a bit confused as to what I need exactly. We have-

  1 License Server Standard 4 x vCenter

  4 x vSphere Enterprise license 4 (who manage our ESX 4 hosts this site)

  3 (and soon 4) remote sites that have the same server ESXi

  I would like to be able to manage ESXi host using vCenter as well, is this possible with what we have? If this isn't the case, can someone direct me as to what it takes?

  Thank you

  You need the standard by CPU socket for each host license to add to vCenter.

  You can always create a separate environment and get the Essentials Bundle (up to 3 guests max) for $500:

  http://store.VMware.com/servlet/ControllerServlet?Action=displayPage&env=base&locale=en_US&siteid=VMware&ID=ProductDetailsPage&ProductID=126843700&RESID=psfyPAoBAlkAACQ2y-kAAAAX&rests=1277824287882

  So you should have 2 vCenter servers.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• When was the last time that 5.5 ESXi host not re-initialized and total times restarted last month.

  Hi team,

  We have more than 100 ESXi host in our environment, and we need to know when was the last time ESXi host rebooted and no times restarted last month. Please help me get the power cli script. Any help will be much appreciated. Thank you

  Thank you

  VMware tech

  OK, so the ESXi nodes were hard started (as if you pushed the power button).

  This is probably why the task for a planned restart does not turn upward.

  Do you see the ESXi nodes with the following script?

  It shows the events where the connection to a host has been lost.

  $start = (get-Date). AddDays(-7)

  Get-VIEvent - MaxSamples ([int]: MaxValue)-start $start |

  where {$_-is [VMware.Vim.HostConnectionLostEvent]} |

  Select CreatedTime,@{N='VMHost'; E={$_. $host.name}}

• Can upgrade you 5.1 to 5.5 ESXi host using the zip file?

  I read the KB articles which seem to indicate that, to upgrade an ESXi host, you must use a vSphere Manager or an ISO on CD or USB.   But I saw someone go from 5.1 to 5.5 by downloading a zip file and running the commands, as indicated in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2008939.

  When you connect through the vSphere client, it seems to indicate that it has updated to 5.5, but I fear that this may not be an upgrade path has officially supported or may be missing something.

  Anyone here can comment if you can upgrade between the press point with a zip and and the upgrade of the above method fix?

  Thank you

  Yes, it is a supported upgrade path, take a look here: VMware KB: methods of upgrade to ESXi 5.5

  Summary of 5.5 ESXi upgrade methods

  This table summarizes the methods supported for ESXi 5.5 upgrade:

  Upgrade methods	Upgrade from ESX/ESXi 4.x 5.5 ESXi	Switch from 5.0 to 5.5 ESXi ESXi	Go to ESXi ESXi 5.5 5.1
  vSphere Update Manager	Yes	Yes	Yes
  The CD interactive update DVD or USB drive	Yes	Yes	Yes
  Scripted upgrade	Yes	Yes	Yes
  vSphere Auto deploy	NO.	Yes, if the 5.0.x ESXi host has been deployed by using automatic deployment	Yes, if the 5.1.x ESXi host has been deployed by using automatic deployment
  esxcli	NO.	Yes	Yes

  And here's the documentation: update or update a host with Image profiles

• Share of CPU between ESXi hosts in a cluster?

  Is it possible to configure a cluster with a pool of CPU resources such as all CPUS of all ESXi hosts in the cluster are in the pool and if a virtual machine starts using more CPU that's current host has it can draw another ESXi host CPU to deal with?

  A virtual machine can use CPU only from the host where the virtual machine works... There is no way to allocate CPU of multiple hosts to a single virtual machine.

• Windows 2008 R2 VM disk system increased substantially after moving from VM to ESXi host 5.1 to 5.5 ESXi host using vCenter Converter Standalone

  Hello:

  I moved a Windows 2008 R2 VM from a 5.1 ESXi host to an ESXi host 5.5 using vCenter Converter Standalone.  The c: / drive system passed largely to where I now have to extend the volume.  Is this normal/expected behavior?  Perhaps the conversion/move creates temporary files I can delete?

  Thanks much for the ideas.

  This is not the expected behavior.

  Size of the disk is defined during the conversion and which will not increase by its own during conversion.

  Now, you need to V2V, if you want to reduce the volume.

• Problema conexao ao 5.1 ESXI host using IP address

  Good afternoon!

  Enfrentei ler um problema ao try connect ao console ESXI. Beauté na tela dinna host ESXI as o mesmo não distãncia IP.

  "Then fled ao"configuration management network " para configurar o IP, para a minha surpresa access estava indisponivel o para o meu usuario root, nao conseguia joints o IP.

  Then sobrou a configurar por linha comando option. After some tempo, um colega para resolver o problema precisou realocar o meu para VMKernel interface devida. Problema esta IA, fazer isso, houve o why?

  Then para voces entenderem better, o cenario e este aqui:

  1. Servidor com interface to enable gerencia IBM;
  2. A team of suporte e love por joints o IP without Configuration Management Network;
  3. Apparently a suporte o IP joints esqueceu team - but why nao era possible joints o IP da forma normal, pelo esxi host?
  4. A team of only, the faz joints nome o suporte e ip e demais configuracoes using o do ESXI console.
  5. List of Ao as interfaces, one ""Management Network; " " era presented, however, neste host ping ao address 127.0.0.1 localhost o mesmo não estava running.

  Then pessoal, estou Querenda hear what it happened neste don't host ESXI, afim sanar registaram problemas no futuro.

  Desde ja Agradea§o!

  Fabio,

  UM problema e possible a members interface (VMKernel port) ter sido removed do group members ports, through e of da comando voce poderia verificar linha an existencia da mesma utilizando o comando esxcli list of network ip interface.

  Uma vez não exista essa interface, possivelmente voce nao let configurar o IP do through configure networking, ja nao existía uma porta para ser configurada.

• How to remove an ESXi host using command line in putty

  Hi all

  I have a number of 5.1 ESXi hosts that are currently managed by the server vSphere.  The entire cluster and vSphere server must re-built and I need to work on how I can remove servers using PuTTY.

  vSphere server is not in operating condition, so I am unable to remove it through the GUI

  Thank you very much

  I have worked in related directly to each ESXi host and selecting the ESX host, in respect of the summary page, there is a link to dissociate it from vCentre server.

• Storage vMotion-Direct between ESXi hosts

  Hi all

  It is my first time on the boards, I hope it's the right way to go on this subject.

  I have problems with Storage vMotion, it's not a set up us would use normally, rather than by necessity with the current scenario.

  We have a desktop which has 2 x 5.1 ESXi hosts. They do not have a budget for SAN with the installation of HBA, and it is only a single requirement. I have to migrate virtual machines from one to the other, but with no external storage. I wait with Storage vMotion directly from a local data store to another.

  I activated the software iSCSI on both ESXi hosts

  Created a vSwitch separated with a VMkernal on two physical hosts

  The two VMkernals are on a separate subnet * 172.16.1 and production vSwitch is 192.168.5. *.

  The NIC allocated for the 172.16.1 network. * is both connected to the same physical switch.

  I ping the VMkernal and the vmkping the VMkernal

  Scan for storage again and nothing shows up.

  I used software iSCSI before, for a long time so I'm probably rusty. Dynamic discovery is normally indicated in the SAN to pick up storage, and finds it just local storage on each host itself.

  In this scenario, I told the IP address of the ESX2 VMkernal on 172.16.1 ESX1. * since I have no external storage. I think it is, I'm wrong, but I don't know what else to do to recover local data warehouses.

  Any ideas to try would be very appreciated.

  Thank you

  Sorted by using 5.1 feature Shared-Nothing vMotion

• Client VM copies between ESXi hosts

  Hello

  My apologies if this has been posted before, but I can't find the answer I'm looking for.

  I transferred the guest of a virtual computer files using download the data to an ESXi host to another store. Is it possible to open the comments on the destination host ESXi?

  If this is not the right way, what is?

  Thank you

  If you have already copied the files then you can browse the data store in the new host, right-click on the VMX file and select Add to the inventory.  When you start the virtual machine, you will be asked if it is a copy, or if the virtual machine has been moved (see the summary for the VM page if you do not see the issue).  If you do not use the same groups of port VM on the host of the 2nd, then you need to change the VM to fix this as well.

  The way you moved it is fine.  You can also use VMware Converter for tasks like this.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• My programs do not work after the use of backup and restore.

  I had to restore my laptop to original settings and now my program files do not work or even appear in the start menu. They show on the C drive.

  I used all my programs and files backup and restore for the restoration.

  How can this be repaired?

  Reinstall the programs.

  See you soon. Mick Murphy - Microsoft partner

• I use a blu - ray disc as my backup media by using the backup and restore, but windows will say still unable to perform this task

  I have a HP h9 - 1250t and can never use a blu ray disc tp save my work using the command from the windows Explorer which is strange since I use blu - ray disc in my dell xps 14, any help on this?

  Hello edilbertojun,

  Backup stores data in a compressed format on optical drives and blu - ray is an optical device device, I don't think you can use Windows built in backup and restore functionality.

  You must use a backup solution 3rd party backup on the Blu - ray disc.

  I may be wrong so that other members of the community can be better able to solve this problem.

  Marilyn