OfficeJet 6600: Confusion of Fax-printer

Similar Questions

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• Try to print, PC says he'll send an Officejet 6600 fax

  My HP Officejet 6600, which I had to reinstall because of a connection problem, calles herself now FAX HP Officejet of the 6600 in the PC.

  No way to print. My PC is a HP Pavilion h8-1030be. He continues to ask for a fax number.

  No idea how to set up the printer on the PC, in order to print when I want for that.

  In any case, I will try now to restart the PC and see what happens.

  Best regards

  Thanks for the update, Paul.

  It seems that the installation did not properly this time and I advise to remove the printer software.

  • Click on the start menu in the PC
  • Click on all programs
  • Open the HP folder
  • Open the folder for the Officejet 6600
  • Click the uninstall option
  • Once the uninstall is complete, the program will disappear.
  • Click on the start menu in the PC again
  • Click on devices and printers
  • Remove the 6600 if she is always present
  • Select any remaining printer by clicking once to the left
  • At the top of the window, click Print Server properties
  • Click the tab drivers
  • Delete lists of the Officejet 6600

  Once the printer is deleted, then re-install with the latest drivers from the HP website.  To access the downloads page for the 6600 click on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108845-3&cc=us&DLC=en&LC=en&OS=4063&product=5304873&sw_lang=

  This returns the printer to normal functionality?

• HP officejet 6600 my laptop does not recognize the printer

  My laptop does not recognize the printer any longer. It will recognize the fax on the printer but not the printer itself. Can you help me? I have two currencies on my laptop. HP officejet 6600 and hp officejet 6600 network. Even printing for both. One network is the fax. I'm not clear what is the question. I can't even download drivers or updates for it.

  There are two 6600's in the list, a fax and a printer, because the full feature software and drivers have drivers for both. If you do not use the fax, you can remove devices and printers.

  A work print from other sources? For example Notepad?

• printer connect to MS Word on officejet 6600

  I have a document in my MS Word 2007 screen, select printing action, select HP officejet 6600. system gets yhr printer then... does not print the document in the same way that other printers, but instead displays a screen offering options to print fax cover pages, etc.?

  DeltaDave,

  Welcome to the HP form.

  This may be a simplification of your problem, so bear with me.

  When you install a multifunction printer, you will often get a couple of "printers" in the list that appears when you select your printer.  One would expect to see the main printer as the default, but if you have selected this printer as the default printer, you can see the fax, a Note, another printer... something you don't expect.  The printer of your choice can be in the drop-down list.

  Check if your printer is the default printer for the system.  In windows, Windows 7 and before, it is in devices and printers (from the Control Panel, if you wish).  Right click on the printer - such as the default value.

  I use no more Word 2007, Word 2010 is not a selection of printer control in the Options.  You can check to see if there's something hinky (incorrect) in your Word Options (possibly Adavnaced section).

  One last thing: If you have not installed the software of full functionality for this printer, it can not easily be driven from the computer.

• Cannot print from Windows Photo Gallery, my new printer HP OfficeJet 6600

  I have a new range of printers hp officejet 6600 and you cannot print the photo in Windows Photo Gallery.  Called HP and they said that the computer does not recognize the printer.   Had a HP technical support to install this printer as I didn't have the right drivers.

  Thank you

  Caroline

  While you need? A pilot? Take you him to HP.
  http://WWW8.HP.com/us/en/support-drivers.html

  These are the support for all your windows 'Live' issues forums.

  If this it Windows Live Photo Gallery, you can get help here.

  Windows Live Photo Gallery
  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

• HP Officejet 6600 copy function - output offdset

  E-all-in-one printer, HP Officejet 6600 range

  The print function works fine.

  When you use the copy function, the image is moved to the top about an inch.

  Otherwise, the top inch of the page of the original is missing and there is an inch of white space at the bottom.

  Sorry,

  At took the second back to BestBuy. Referred and got an Epson WF-2540 and an $80 store credit.  I'm sorry. Closing this thead OK?

• OfficeJet 6600 Fax confirmation date and time fields zeros

  When I send a fax directly from the printer that prints the confirmation record has a field for the date and time, but it shows all zeros (see below)

  Is it possible to fix these so that they are accurate? If I need to prove that a fax has been sent, it must show when.

  With the help of 6600 OfficeJet on WiFi with Windows 7 64 bit

  

  Hi CJChristian,

  Welcome to the HP Forums!

  I understand that your date and time of confirmation fields are equal to zero with your HP Officejet 6600, and I am happy to help you!

  Please have a look through this guide. Implementation of the hardware of the printer for e-all-in-one printers HP Officejet 6600 and 6700 Premium H711n. Select the Officejet 6600 and search for step 7 set the Date and time.

  Also this guide can help too. Setting up the device HP all-in-one to send and receive faxes.

  I hope that these guides are useful to you and have a nice day!

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.

• HP Officejet 6600: Fax/copy/scanning does not work

  I'm unable to use my fax/copy/scan on the printer functions.  The printer works well when printing from the computer.  I've done all the troubleshooting... Disconnect, restart it (printer and computer), etc.  All the reports that I ran to the 'troubleshooting' return with all PASSES.  But when I re - try these functions, the printer display "starting fax" or "Start scan" and "start copy."  I've been here for the last 10 minutes trying to get a copy, and the screen is still showing "start copy".  And while they are 'begins', I am unable to 'x', so I put off the printer.  The printer is 2 years old and we bought the extended warranty expired 2 months ago thanks for any help you can provide.

  Hello

  I will be happy to help you with that, may I know if you have tried uninstalling the driver of your PC printer and re - install the latest driver?

  1. Uninstall the printer driver HP Officejet 6600 of Control Panel
  2. Reinstall the printer driver for HP Officejet 6600.  Here is the link to download the latest print driver: http://www.support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4322968/model/4323587

  'Although I am an employee of HP, I speak for me and not on behalf of HP' 'say 'Thank you' by clicking on the star of congratulations in the post helped you. -Please indicate the position that solved your problem as "acceptable Solution".

• OfficeJet 6600/6700: How can I stop my HP Officejet 6600/6700 stop printing reports?

  I just installed a new HP Officejet 6600/6700, but whenever I have to send a fax it produces a report. If I misdial or there is no answer, it also sends a report. I see these just a waste of paper and ink. How can stop the production of reports - I have looked through the manual but find nothing in there to help. Thank you.

  Hello

  Please try the below mentioned steps that should solve the problem.

  On the front panel of the printer

  Press SETUP (wrench) > Fax Setup > Fax reports >
  the Fax Confirmation Off = value
  value = Off Fax error report

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie

• Portable printer HP Officejet 6600: need of digitization program

  I bought my printer HP Officejet 6600 in January 2013.  I've installed all the programs on my old computer (Windows Vista). With the installation, I was able to print electronically, and there is a stock of Scanner program that allowed me to scan a Document or Photo to my computer. I recently bought a new computer (window 10).  I tried to use my HP disc to download these printer programs but was unable to do that because I got a message that the disc did not support Windows 10.  Can you help guide to get the programs of HP that I could access and download to my new computer which would give me the possibility to print electronic and scanned documents and photos (not via the USB port)?

  Why don't you just download the software Win 10 out of the HP web site for your printer. A simple search returns... http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6600-e-all-in-one-printer-series---H7/4322968/model/4323587

• OfficeJet 6600 / Officejet 650: roblem recognition new printer when printing to adobe files

  Having a problem with my Officejet 6600 when I try to print a file "adobe". The problem is that the onl print window shows my previous printer that was n Officejet 6500 E709n. I NC does not change this in the print window. I have removed all traces of the Officejet 6500 E709n of my system and have reinstalled the current printer from the disk.

  Any ideas? Need help.

  TallPal1

  Hi @TallPaul1,

  Since you seem to be able to print from other programs, I think that the question has something to do with Adobe. Maybe you will find the following article, I found the site useful adobe: PDF print troubleshoot | Acrobat, Reader.

  If the problem persists, it may be preferable for you to reach the Adobe community.

  Good luck! If there is anything else I can hep you let me know. Please go on the HP Forums!

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you