Transition from primary role of sleep or standby to primary school

Similar Questions

• Failover from primary sleep to the physical

  Hello

  I'm using Oracle 11.2.0.3

  My primary database is a database of the RAC 2 nodes, and my backup database is an instance unique sleep physical database.

  I test above fail (no switch) scenarios. I have found that whenever I need to failover the steps below must be applied:

  1 identify and address gaps.

  If the deficiencies are found copying all the archived recovery missing logs from primary and enter it on the standby database.

  2 initiate a failover to the target standby physical database.

  3 convert the database physical standby the main role.

  I have the question below,

  1 about "identify and resolve gaps."

  If my primary database is down and inaccessible, how would I know if there are gaps? I won't be able to query any view to see.

  If my first use ASM how could copy the archiving of the ASM journal? is it applicable?

  2 Let us say that I made the switch how can open my old primary as the physics of the standby database after failover (and after solving the question on this database.)

  Kind regards

  If the primary database is not accessible, you can check the destination of archive and see the available archive logs that are not shipped and copy them to the DR server.

  If the main server itself is not accessible, you can then perform the failover with a loss of data. See the links below

  Role of Transitions

  https://taliphakanozturken.WordPress.com/2011/07/09/physical-standby-database-switchover-failover-operations/

  check the discussion for the copies of the records of the asm disk

  Need help during the copying of ASM Archivelogs on disk.

  To restore the old standby, you should have flashbacks activated, otherwise you will have to re-create the eve of primary news.

  http://gavinsoorma.com/2009/07/flashback-database-after-a-Data-Guard-failover/

• Passage of the roles - ensures primary school

  Hi all

  We have a requirement in our environment to switch mode on primary eve. This is to stop the machine from primary database since it is now more than 350 days.

  I have a few crossing the reg of doubts.

  We have two servers

  1 Server1-Prim - main database hosts with SID - LPBT

  LISTENER - WITH SID-LPBT ON 1521 PORT WITH HOST = 80.0.1.187

  TNSNAMES with entries for the two services LPBT and STBYLPBT

  2 Server2-Stby - secondary database hosts with SID - STBYLPBT

  LISTENER - WITH SID-STBYLPBT ON PORT 1521 WITH HOST = 80.0.0.240

  TNSNAMES with entries for the two services LPBT and STBYLPBT

  Our is a physical standby and passage procedure below of the manually using SQL commands instead of dataguard

  Digital allows a primary and standby to switch roles without data loss.

  No need to recreate the old primary school. Conducted for a scheduled maintenance.

  Steps to follow:

  1. check if primary can be switched to sleep mode

  SQL > select switchover_status from database v$.

  If returns the value "TO_STANDBY", its good to pass the primary role of Eve.

  2 convert primary to standby

  SQL > alter database validation to the transition to physical standby mode;

  If the value is "ACTIVE SESSIONS" in step 1, then

  SQL > alter database validation to the transition to physical standby with the stop of the session;

  3. stop and restart the old primary as before

  SQL > shutdown immediate;

  SQL > startup nomount;

  At this point, we now have two databases, such as the day before.

  4. on the basis of data target standby, check status of the digital switchover. If the value is "TO_PRIMARY" then

  SQL > alter database validation at the grade crossing;

  If the value is "ACTIVE SESSIONS", then add "WITH the STOP of the SESSION" to above the command.

  5. stop and restart the new primary database

  SQL > shutdown immediate; start-up;

  6. start back on new database (former primary) pending

  SQL > alter database mount standby

  SQL > alter recover managed standby database disconnect log file using current;

  ----------------------------------------------------------------------------------------------------------------------------------------

  My question is after the transition to digital, if we connect as 'conn sys@lpbt as sysdba' since sqlplus window from another pc, how the request will go to the new primary database server (80.0.0.240) since tnsnames only will point to the old principal server (80.0.1.187).

  can you please explain how it works, or should we add a few more entries to the listener or files tnsnames.

  Please notify

  We have three databases and we use the db_links inside these three db for transactions

  so can we not use as main stbylpbt, as db_links does refer to db_link-host - lpbt solve in tnsnames who will fail.

  Yes, you are right. You have to re-create these links db to point to your new primary database ("old Standby") using guests as "STBYLPBT".

  As mentioned previously, you must redirect all your applications and users to point to the new primary database by making use of the "STBYLPBT" entry TNS.

  in this case, after the success, if we need to change db_names (vice_versa) and listeners as was before

  You don't have to do anything with regard to the 'db_name' or with the listener. Db_name remains the same on the primary and implementing standby.

  I don't understand the reason for you to change the listener. 1 listener on the server must be able to accept connections.

  80.0.0.240 is your host before and there is a listener on this. After a failover, it becomes your primary database. You would try to connect to the new primary database with input TNS "STBYLPBT." It reminds the host '80.0.0.240' which is your new primary database. Hope this clears.

  STBYLPBT =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 80.0.0.240)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = stbylpbt)

  )

  )

  -Shivananda

• Why the transition from the server causes error?

  I reported the error to the it Department, they respond as indicated below:

  "These errors are the result of a transition from server we are currently experiencing. As soon as the server transition is complete errors should stop. »

  «The transition of the server error has to do with displacement of the IP4 to IP6.» All pages work technically, but if you happen be routed through IP6 instead of the IP4, some of our pages will not appear due to firewall issues. »

  Does anyone have suggestions on what causes the error of IP4 to IP6?

  Thanks in advance for your suggestions

  -----------------------------------------------------------------------------------------------------------------

  Detailed description on the report of mail as shown below:

  Referring to the following link, some images cannot be display on 29 October.

  http://I1093.Photobucket.com/albums/i438/junk000/Error2.jpg 
   
   
  The other day, when I try to click on the following link and open it using IE8, the response is slow and getting the error on
  "Web Page error: 502 Bad Gateway!" with frontispiece USGS URL resolution error
  Please see the link for more information.

  http://I1093.Photobucket.com/albums/i438/junk000/error-6.jpg

  Do server not able to response to the loading of the web?  Is there anything to improve his performance on the server?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Is there any event generated when I move any window or windows media player from primary monitor to secondary monitor.

  Original title: media Player from the window of the main monitor to the secondary display.

  Hello

  Whem I'm moving my Windows Media Player fromprimary on secondary screen (or any other window),

  is there an event generated by the Windows operating system?

  If yes how can I capture this event?

  Best regards

  Sharad

  Hello

  There is no event that is generated when you move any program or any window from primary monitor to secondary monitor.

  For more information visit: How to view and manage the event logs in in Windows XP Event Viewer

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Transition from XP to Windows 7, can't locate the little information?

  I'm not very savvy of computer programming. As indicated, I have Windows XP 2002, service pack 3. Follow the instructions in Microsoft XP to find the number of "bits: under the property system.» Unable to find these.

  Also, should I move from XP to 7?

  * original title - change from XP to Windows 7?  XP version 2002, Service Park 3. Cannot find info.* bits

  You probably have XP 32 bit, namely:

  If your computer is running Windows XP, follow these steps:

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

  Installation custom own steps

  Time to use:
  Or the transition from XP to 7, not supported in place upgrade paths (ex: Vista Home Pro 7)
  A Windows system to 32 bit on a 64 bit system, or change the language
  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation do you want?" click "Custom (advanced)." Note: 32 to 64-bit requires restart and boot from the DVD.
    
  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• The transition from the bridge of one payment to another

  Hello

  We have a customer who currently treat offline credit card transactions that that they have their payment gateway set to 'process (process manually via the existing installation) offline '.

  Now, they want to put in place a bridge of the National Australia Bank (NAB).

  Could someone provide suggestions as to how it would approach the transition from the bridge of one payment to another whereas BC only allows gateway to a payment to be selected at a time?  In other words:

  1. Is it possible that the existing offline payment gateway and the new NAB gateway can coexist so that we could go through a test phase without interrupting the continuity of the customer with the treatment of existing credit offline transactions?
  2. Or do we have to "cut" their existing sales process until the new payment gateway is fully configured and tested?

  Any comments would be much appreciated.

  Gavin

  It is not that much work to spend from OFFLINE to NAB TRANSACT

  I'm not sure, that you need to worry too much on the implementation and testing before to cut more (unless you have a really high turnover store and you want to be careful)

  Perhaps you could watch you log in to your partner portal and reproducing the SITE you want to configure on (if you have an exact dupe). Then you can go about your tests on THIS site and get all tested and functional then cut on the settings when you are happy

  Good luck

  [email protected]

• Is there a way to make transitions from State/animations of a States - button for example fl.control?

  Is there a way to make transitions from State/animations of a States - button for example fl.control?

  All I can do now is to change the structure of the skin and that's it, I can't do an animation between States as I can with Flash Builder skins. So is it possible to do so, any technique or I need to create a button from scratch?

  Thank you!

  simplebuttons have properties upState, etc., that you can use to assign some movieclips to the 3 States.  You can use the property movieclps currentFrame (seem to) smooth the transition from one State to another.

• Transition from FCP to the body - Command Ctrl-v

  Hey guys,.

  I'm transition from FCP to the body, and a shortcut that I use quite often is CTRL-V. This razor-cutting blades clamp/clips selected in the exact frame where the time indicator is seated. Is there a similar shortcut for the body? I know I can hit the key Cut and then click on where I want to make a cut, but it would be much easier to just hit a shortcut key and cut exactly on the frame without having to guess if the razor tool is on the correct framework.

  CS5.5 - OS X 10.6.8

  Cmd / Ctrl + K

  -Jeff

• Used computers for primary school in South Africa

  I visited the PRIMARY SCHOOL of NOMPONDO in Kwa Zulu Natal, South Africa.  They need 40-50 computers for the computer lab they are building for children.  It seems as if many companies use Dell computers as a service now and their old computers are returned to Dell.  Dell has a program/person I can contact to bet used computers for these children?  Must be able to run Windows 7.  Thank you!

  I read that it was to recover and recycle plastic and metal. You could try emailing the goodwill and check with them. This is the US site, but it's a place to watch.

  http://www.goodwill.org/

• Switching from primary to the standby database

  Hi all
  
  Please can you give me some advice/comments/documents to help understand the steps that should be applied to move from a primary database to a standby database.
  I'm using Oracle 11 g 2 with Dataguard.
  
  What are the steps that must be applied from the primary to the standby database.
  
  Kind regards

  Hello again;

  My paper is a physical standby database. I have NOT tested using a logical standby database.

  The steps documented to perform the failover of the database logical Standby is located in:

  Perform the failover in a Configuration of data hold without the [ID 232240.1] Data Guard Broker

  Look under the heading "the steps to perform the logical passage with the Standby databases:

  I hope this helps.

  There is additional information here:

  http://ayyudba.blogspot.com/2007/10/performing-switchover-in-Data-Guard.html

  Best regards

  mseberg

• W700 wake from sleep or standby long, paved model touch completely stop working

  After having used the w700 less than a week, I found another problem on the laptop.

  I'm not sure it's a problem hardware or software, if someone has the same experience as me.

  Please give me some advice: is it a common problem or what else?

  A moment where the operating system, close the form or click sleep or hibernate with touchpad (touchpad with shifts two keys are completely work now).

  Re-open the screen, laptop alarm, the touchpad, including down to the left and right keys then completely stop working right now. I have to use three other buttons above the touch pad with red dot to restart the computer.

  After restart it completely, the touchpad with two down keys working again.

  Very strange, is there some sort can help me solve the problem?  Thanks for your reply.

  Try to uninstall the scanner activity monitor if it is installed.

• Restore the backup from primary to the DR Server online

  Hello

  I'm on Oracle 10.2 and restore an online backup of the main server on server of DR. Online backup has been taken: 30.11.2015 21:00 and ends at 01.12.2015 01:23:16.

  The first redo log when the backup began 60588 and the last roll forward log is 60596 when the backup is complete according to the backup log.

  However, it is beyond ask 60596 when you are recovering:

  SQL > restore database to sleep by using backup controlfile until cancel;

  ORA-00279: change 952123702 generated at 01/12/2015 04:50:25 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001

  ORA-00280: change 952123702 thread 1 is in sequence #60598

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952134239 generated at 01/12/2015 05:50:32 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001

  ORA-00280: change 952134239 thread 1 is in sequence #60599

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952145796 generated at 01/12/2015 06:51:06 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001

  ORA-00280: change 952145796 thread 1 is in sequence #60600

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952155617 generated at 01/12/2015 07:51:51 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001

  ORA-00280: change 952155617 thread 1 is in sequence #60601

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00308: cannot open archived log

  'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001 '.

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error

  ORA-01152: 1 no file has been restored from a sufficiently old backup

  ORA-01110: data file 1: ' Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

  SQL > ALTER DATABASE ENABLE PENDING DATA base;

  ALTER DATABASE ACTIVATE STANDBY DATABASE

  *

  ERROR on line 1:

  ORA-01152: 1 no file has been restored from a sufficiently old backup

  ORA-01110: data file 1: ' Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

  I noticed after I applied 60598, he said:

  
  

  ORA-00278: log "L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001" file is no longer needed for recovery

  
  

  This means 60598 is really not necessary for recovery?
  

  No idea why she asked newspaper after 60596?

  How can I check which is the last log to roll forward to complete recovery?

  V$ RECOVERY_LOG shows nothing.

  Thank you.

  Hello

  If you try to enable the database, please make sure the SNA aligns with... In your case, controlfile raised YVERT YVERT/bass.

  If you try to re-create the controlfile.

  After you re-create the controlfile, you can run a fake recovery and open in resetlogs.

  After you re-create the controlfile

  SQL > restore database using backup controlfile until cancel;

  SQL > alter database open resetlogs;

  Thank you

• eve of single node created from primary CAR, what to do later?

  I just find the redo logs and standby redo logs are also duplicated primary to standby mode.
  In standby mode, it is autonomous, but newspapers redolog and stanedby are all two threads.
  
  SQL > select group #, thread #, bytes of the log v$.
  
  GROUP # THREAD # BYTES
  ---------- ---------- ----------
  5 1 52428800
  2 1 52428800
  1 1 52428800
  4 2 52428800
  6 2 52428800
  3 2 52428800
  
  6 selected lines.
  
  
  SQL > select group #, thread #, bytes from v$ standby_log;
  
  GROUP # THREAD # BYTES
  ---------- ---------- ----------
  7 1 52428800
  8 1 52428800
  9 1 52428800
  10 1 52428800
  11 2 52428800
  12 2 52428800
  13 2 52428800
  14 2 52428800
  
  8 selected lines.
  
  
  This made me think I happen to give up the thread #2 groups? or it's ok just leave it there?
  
  All the other things I need to check?
  
  thread parameter is:
  
  entire thread 0
  
  Thanks in advance.

  9233598 wrote:
  I just find the redo logs and standby redo logs are also duplicated primary to standby mode.
  In standby mode, it is autonomous, but newspapers redolog and stanedby are all two threads.

  This is the expected behavior.

  >

  SQL > select group #, thread #, bytes of the log v$.

  GROUP # THREAD # BYTES
  ---------- ---------- ----------
  5 1 52428800
  2 1 52428800
  1 1 52428800
  4 2 52428800
  6 2 52428800
  3 2 52428800

  6 selected lines.

  SQL > select group #, thread #, bytes from v$ standby_log;

  GROUP # THREAD # BYTES
  ---------- ---------- ----------
  7 1 52428800
  8 1 52428800
  9 1 52428800
  10 1 52428800
  11 2 52428800
  12 2 52428800
  13 2 52428800
  14 2 52428800

  8 selected lines.
  This made me think I happen to give up the thread #2 groups? or it's ok just leave it there?
  All the other things I need to check?
  thread parameter is:
  entire thread 0

  No need to drop, you can leave it as what. If his day before RAC then recovery will be made in each instance of each thread.