Cannot print crossword correctly the usatoday site

Similar Questions

• my printer hp pro 8600 guard saying: I have a paper jam and I have no, I have turned on and outside - I cannot print, I tried the fix that I found on this site, it does not detect, this is something I do now?

  It's frustrating that I cannot print and there is no paper jam, the difficulty that I found on this site did not find a problem - what do I do now?

  If the printer says there is a paper jam, it's a hardware problem and you need to look for the answer in the Web page of troubleshooting for your HP printer...

• Cannot update or load the Web site.

  Hi, my name of Chris and I bought a MacBook Air off of eBay about 2 years ago and I decided to use it and I noticed that I was on the version of Mac OS X 10.6.8 and he decided to search for software updates. As soon as I tried to check, he would fail and a pop up appears saying "Update software cannot verify updates due to a network problem". I am absolutely convinced that my internet connection completely works because I just got about 1 week ago. I am sorry to ask a lot, but another problem I have is that whenever I go online, some site not loading and under him, it appears "ERR_EMPTY_RESPONSE". On the Web site like YouTube and Apple Discussion of work. It would help if someone could help me solve these 2 problems.

  You have access to another network where you can see if you still have the same problems? This will help determine if there is a problem with the network or computer.

  Did you reboot / reset the router?

  Connection to the problems of the App Store

  Connection to the problems of the App Store (2)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

• HP Photosmart 7520 cannot print coupons or receipts from sites that I could always before

  I've always been able to print coupons or receipts from Web sites until a few days ago and now when I hit print control P or control/SHIFT/P I get a white screen with the site web/print info in the address at the top line.  Nothing happens.  When I check my devices to see "what is printing" my queue is listed.

  Hi there @BluedogMom

  I hope you are well!

  I understand you are having problems printing from certain sites, for your Photosmart 7520. I will do my best to help!

  Please all first try to open a different web browser, for example, if you use Firefox, try Google Chrome, visa versa.

  Try to print to the other browser and let me know what happens.

  Also let me know which operating system you are using: what is my operating system?

  Thank you

• Using a Photosmart C310a cannot print photos from the photo paper tray. With the help of Mac Lion

  When you print photos using a C310a Photosmart on a Mac with Lion. I cannot print on paper photo from the photo tray. It keeps or by default in the paper tray.

  Any suggestions

  Hello...

  Please try these steps... it might solve your problem...

  1. go to mac apple icon-go to the software update - pls download and install the update.

  2 restart the pc - and then go to the new apple icon - go to System Preferences and continue to print and scan

  3 Higlight your printer, then click on the button "-" to remove the printer-if your connected USB printer please unplug USB cable - then restart your pc

  4. after the restart, return to icon - system preferences - apple print and scan-for usb connection: plug the USB - if your printer does not automatically appeared on list of the printer olease, click plus the sign and Higlight your printer then click Add button - after that - to prove the fucnctionality

  for a wireless connection - simply click on the sign more, then, HELLO - Higlight your click and select printer Add button - then prove the functionality if you can print and scan.

  Hope it will work for you...

  Please click on that button KUDOS if I solved your problem... Thank you! more power! =)

• Can load is more correctly the Web sites?

  I recently signed up with Outlook.com and Skype accounts. Since I could not reach load Web sites correctly, even if Outlook.com is charging correctly. When I go to the homepage of Microsoft or any page below, the pages are rendered in the text (such as a webpage since the 1990s) and there is no graphics. All this made it difficult to upgrade my Office 2010 with Office 365, if I managed to do it with persistence. I think it's a strange problem, especially since I can properly load virtually any other site I use routinely.

  I have Windows 7 Pro (fully updated) and IE 11. I have run Norton and Malwarebytes and to see if they were the cause, and they were not disabled. I have reset my Internet Options and which did not. I tried to load the Microsoft chrome website and wasn't able to load the Web site either - as I assume that the error is not related to the browser. I ran "sfc/scannow" and who has not save questions. I tried a lot of things...

  When I created my Microsoft Account, I seem to have some problems with the preferences of the ad. But then I bought without advertising Outlook, so my ad settings could not be guilty (if, in fact, they have something to do with this problem)?

  I have a ThinkPad and I run other third-party applications such as Acronis, CCleaner, IObit Uninstaller. The possible problems here?

  Anyway, if anyone out there think that they have the right answer to this weird question, I'm all ears.

  Hello

  Have you tried to access the site from Microsoft while your in Safe Mode? If this isn't the case, we invite you to do so. If the Microsoft Web site gently while in means of Mode without failure there is an add-on in your browser that is causing the problem. To access safe mode, keep tapping F8 key before the Windows logo appears.

  To manage Internet Explorer 11 Add-ons, click this link. After the management of it, reboot your PC and try to access the Microsoft Website again.

  Note: Manage your modules in Mode without failure.

  Let us know how it goes.

  Kind regards.

• ASA Site, Remote Site cannot access DMZ to the Hub site

  So I've been scratching my head and I just can't visualize what I what and how I want to do.

  Here is the overview of my network:

  Headquarters: ASA 5505

  Site1: ASA 5505

  Site2: ASA 5505

  Training3: ASA 5505

  All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.

  Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.

  Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.

  What should I do?

  My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?

  I enclose the show run from my ASA HQ

  See the race HQ ASA

  For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.

  For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.

  HTH

  PS. If you found this post useful, please note it.

• Cannot print because of the "program error".

  Cannot print photos because of the "program error."

  Printer will print, but no pictures, docs and images (I printed a Fireworks file). I worked on it for HOURS. Please someone help before I go nuts!

  Detail:

  OS: Win 7

  Printer: Epson xp620 new... Epson says that the problem is not theirs. Surprise.

  Have been removed and the preferences file. Apparently it is a common solution.

  Can not find the Photoshop file. Could someone give me a full path in Windows?

  Connection: Wireless.

  Version: Just updated about an hour ago.

  Thank you!

  You suggest to open one of these files and go to the file menu > press the SPACEBAR on the keyboard > click the option Print while holding the space bar

  This will reset the printing preferences for Photoshop.

  If it still does not respond, suggest you to share one of these files, so that we can try to reproduce the problem on our side.

• HP Envy 5530 cannot print even if the connected printer

  I installed the HP Envy 5530 series software on my Mac, OS 10.9.3 computer.  I get a message that the printer is not connected.   I ran the tests wireless network, everything going.   I even reinstalled the software.   I am able to print successfully from my IPHONE and PC laptop to work wireless.  Please help!

  Hello MacUser622,

  Welcome to the Forums of HP Support!

  I see that you are having problems printing from your Mac with the 5530 LIKE 10.9.3 new, knowing it will print from an iPhone and the PC is good news.

  You can try to reset the printing system on the Mac, this will delete maybe damaged driver. Mac OS x: how to reset the printing system will help you if not done before.

  Once done, repair disk permissions on the Mac.

  Uninstall and install the printer software and printing test. Uninstall better by going to Applications > HP > double click on uninstall and follow the steps. I suggest to use this to install with: 5530 ENVY HP e-All-in-One Printer series full feature software and drivers - 10.6 of Mac OS X v10.7, v10.8 v10.9.

  Let me know if you are now able to print.

• Cannot print pictures of the photo folder in Vista

  I want to print a photo from my photo folder, but does not print them.

  printer does not print photos from the album

  Hi flossyrosie,

  Please see article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot print after replacing the 2wire modem

  Original title: I use my laptop exclusively. Recently, the 2wire modem was replaced, and everything continued to work perfectly, except for the fact that I can't print. What should I do to correct this?

  No changes have been made to my laptop after installing the 2wire modem.

  Hello

  (1) what exactly happens when you try to print?

  (2) you get any error message?

  (3) what is the serial number and model of the printer?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Client VPN cannot access anything at the main Site

  I am sure that this problem has been resolved in a million times more, but I can't get this to work.  Can someone take a look at this quick config and tell me what is the problem?

  The Cisco VPN client connects without problems but I can't access anything whatsoever.

  ASA Version 8.4 (4)

  !

  ciscoasa hostname

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 15

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.43.254 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address a.a.a.a 255.255.255.248

  !

  interface Vlan15

  prior to interface Vlan1

  nameif IPOffice

  security-level 100

  IP 192.168.42.254 255.255.255.0

  !

  boot system Disk0: / asa844 - k8.bin

  passive FTP mode

  network object obj - 192.168.43.0

  192.168.43.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the NETWORK_OBJ_10.11.12.0_24 object

  10.11.12.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.43.160_28 object

  subnet 192.168.43.160 255.255.255.240

  network of the IPOffice object

  subnet 0.0.0.0 0.0.0.0

  outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0

  Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel

  standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 IPOffice

  IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 649.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  network of the IPOffice object

  NAT (IPOffice, outside) dynamic interface

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication http LOCAL console

  AAA authentication LOCAL telnet console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  http 192.168.43.0 255.255.255.0 inside

  http 192.168.42.0 255.255.255.0 IPOffice

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac

  crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto-map dynamic dynmap pfs set 30 Group1

  Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  map rpVPN 65535-isakmp ipsec crypto dynamic dynmap

  rpVPN interface card crypto outside

  crypto isakmp identity address

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 2

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address 192.168.43.5 - 192.168.43.36 inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal RPVPN group policy

  RPVPN group policy attributes

  value of server DNS 8.8.8.8

  Ikev1 VPN-tunnel-Protocol

  username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g

  username password encrypted blPoPZBKFYhjYewF privilege 0 mark

  type tunnel-group RPVPN remote access

  attributes global-tunnel-group RPVPN

  address newvpnpool pool

  Group Policy - by default-RPVPN

  IPSec-attributes tunnel-group RPVPN

  IKEv1 pre-shared-key *.

  !

  !

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2

  : end

  Well Yes, you are quite right on site!

  Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.

  Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.

  In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path

• Cannot add files to the Web site

  Help. I sent a technical support for Macromedia and phoned my ISP. Neither helped.
  I lost my computer two years ago and had to download files from the server of my current computer. I didn't know how do to set up a local root, and Dreamweaver MX 7.0 folder seems to work directly on the files; I select them from the files Panel, make changes and "save all".
  The problem is, I have no idea how to download non html files which are new. The site has an image file and an audio file, but I can't open the images or the sound of in Dreamweaver to ftp. What I am doing wrong?

  (1) one - have you "defined a site" for this project?

  (2) have you entered the correct information in the server side remote of this site
  definition?

  > Do has 'site view '?
  > All my options-"get", "put" etc are grayed out.

• Cannot log on to the Web site

  I can not connect in my PayPal site. I already uninstalled and re-installed the app from PayPal and Firefox. What is the problem?

  Please try to remove the cookies that paypal has stored after the first try.

  1. Clear your browsing history and other data of a personal nature on Firefox for Android

• Firefox does not display correctly the https sites

  Hello

  Could someone please explain why some sites such as twitter, google are show as content encrypted in firefox, if you are using HTTPS. When you use with HTTP, they are very good.

  Thank you
  Rahul

  Try using Firefox Reset, it helps? Refresh Firefox – reset the parameters and modules