Transitions is messed up the first time it runs

Similar Questions

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• execution of < IMP > Interface fail the first time but run successfully on the 2nd round

  Hello
  
  I have the interface that takes input from MS Access and updates data in an oracle table.
  I created the ODBC connection and using this connection to get data from MS Access table.
  
  Interface details are the: -.
  CKM:-Oracle CKM
  IKM:-IKM SQL for ORACLE
  interface has a MS Access table to the oracle table mapping.
  
  Loading loading step data error as it fails
  
  ODI-1227: SrcSet0 (load) task fails on the source of connection MICROSOFT_ACCESS MTP_Products.
  Caused by: java.sql.SQLException: length of string or buffer invalid [Microsoft] [ODBC Driver Manager]
  at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
  at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
  at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(JdbcOdbc.java:3907)
  at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(JdbcOdbcResultSet.java:5698)
  at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:354)
  at sun.jdbc.odbc.JdbcOdbcResultSet.getObject(JdbcOdbcResultSet.java:1678)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.getResultSetValue(SnpSessTaskSql.java:447)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java:706)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2815)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:559)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:481)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1040)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 1.run(DefaultAgentTaskExecutor.java:49)
  at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
  
  When I run the same interface without modification even runs correctly.
  
  Its a sort of situation weired to me.
  Somebody came in the same situation?
  Indications in this respect would be useful.
  
  Thank you
  Mahesh

  I think that maybe that's the problem.
  Go to my blog http://bhabaniranjan.com/?p=225
  This post is for excel, but it also applies to access as well. Download the 64-bit driver and install it. Let me know whether you are successful or not.
  Thank you.

• I am in charge for the first time.  How long should it take?  I check battery during the charge percentage?

  I'm charging my Apple Watch 1 for the first time.  It has been more than 2 hours, and it shows the green lightning when I touch the face.  How long does take to recharge?  Is there a way to check the level of the battery during charging?  How can I tell when it is fully charged?

  You can take a look at this page of the Apple Watch user's Guide. http://help.Apple.com/watch/#/apd2b717523a

• Order for the first time lost all work and settings.  It can be recovered?

  Close my new Macbook Pro for the first time.  I lost all my work and my settings.  Almost anything can be recovered?

  He was an administrator account or a guest account?

• ICloud using photo library for the first time

  I am considering switching to iCloud photo library for the first time - mainly so I'll be able to use the new functionality of memories in iOS 10. However, I have quite a large library of Photos on my Mac and I'm worried about the mistakes of synchronization, bugs and any damage my irreplaceable photos. I have a Time Machine backup, but each backup on which generally only lasts a week or so, and with a large library of errors can take some time to appear. Should I be worried? Are there precautions I need to take?

  In view of all the people who use it, there are very few messages on issues. Since you have a backup, you can still recover. You can consider to get a 2nd external and make a copy of your photo library in order to have 2 backups. Depending on the size of your library, you may need to purchase additional iCloud storage as free storage space is 5 GB. With a large number of photos, it will take much time to complete the synchronization. Some people have posted their s took 2 to 4 weeks. Our respective synchronization went well and we had no problem.

  Downgrades and upgrades of storage

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• Turn on iPhone 5 s for the first time?

  Hello

  I just bought all new iPhone 5 S in a shop and after I searched (google) answers with regard to the maintenance of the battery, I'm a bit confused. Some say it is wise to drain the battery until the phone turns off and that completely... some people say that is nonsense so that you must charge your phone charge straigh away from the box and don't let not phone to turn off... some are mentioning the procedure 3 hours but I know it's nonsense...

  Can you tell which procedure is best for the first time.

  Thank you very much.

  Here's what I consider some good advice on the pricing of your iPhone:

  When to charge your iPhone or iPad

• Windows7 64 bit. Why the desktop icons all be empty when you run Firefox nightly for the first time?

  Every time after I get a Firefox Nightly update and run it, it will display the next page:
  https://www.mozilla.org/en-US/firefox/nightly/firstrun/?oldversion=30.0 which is fine.
  But when it opens this page, all my desktop icons go clear/white and one by one, they all return with their correct icons. And all this happens in a few seconds.
  Why is the operation of Firefox every night for the first time, my desktop icons?

  I suspect that you have both nightly and Firefox version installed?

  "The Firefox 'about' shows 30.0. and I've now checked for updates and are now running 33.1.1"
  

  It's different from what you have first published here with!
  Firefox 33.1.1 represents the latest version - a 32-bit version.

  Whereas, the version you first posted here with was a generation of 64-bit channel every night from July. Every night is for "Alpha-testers" and is updated every day, where the name of "night".

  Everything that happens in the background on the Windows desktop should not be of concern right now, every night Win 64 bit is several months out.
  If you really want to test the Win 64 Nightly builds, follow and participate in the very different evenings and son of 'channels' on MozillaZine forum is based.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• Firefox anchor link works the first time, fails the second time

  My site uses anchor of the form href = #1234 file.htm links to access < a name = 1234 > in file.htm.

  It works fine when the site is loaded locally on my PC at home. When I download on my site platform it works the first time I use, then fails by jumping to the top of file.htm. IE works fine on the platform of the site as well as on my PC at home.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• V26 freezing the first time I open it to start the computer

  Since v26 Firefox crashes every time I use it for the first time after starting my computer. It starts fine, but as soon as I enter the first page I want to visit, she stalls. It reacts only after 1 or 2 minutes when it allows me to assign the task of windows 7 manager. After that, I don't have to kill the process or anything, it's just back to normal. If I close the program and restart then no problem.

  My specs:
  Dell XPS L501X
  Intel i3 2.4 GHz m370
  3 GB RAM
  Windows 7 Home Premium 64-bit

  Thanks for any help!

  You should maybe wait a little longer after Windows starts to give your security software enough time so that it starts well and initialize.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Music player "Shuffle all" don't work the first time, you must go back and tap it again every time that the application starts, what gives?

  On the Open of ZTE, the music player "Shuffle all" failed the first time, pressed, instead, it will just load a song at random and read the rest of the list in the order; It's not until I click "Shuffle all" and back again it will play in fact mixed. Is this a bug? All solutions?

  Hello

  Yes, I think that it is a known bug in Firefox OS v1.0. Bug 883781.

  The bug is marked as resolved in Firefox OS v1.1. Once that ZTE full update to version 1.1 the bug on your device.

  version 1.1 of Firefox OS was officially released yesterday. If all goes well, it won't be too long before it reaches the Open of ZTE. See here for more details:

  Update OS of Firefox (1.1)

  I hope this helps.

• Avoid Firefox 2 tabs opening on the first time

  Hello

  For internal use at my workplace, we use a custom, Firefox
  Everything is ok on the fact that the first time, opening custom Firefox on a PC,.
  When no profile folder is existing, firefox opens 2 tabs.

  And after that first time everything is ok, I think that it comes to the tab 'welcome. '
  What can I do to avoid this tab open.

  It is our user.js file to overwrite the prefs.js.

  If I remove the
  "user_pref ("startup.homepage_welcome_url"," http://10.10.10.11:8008");") "
  It tries to open the mozilla homepage

  user_pref ("startup.homepage_override_url", "http://10.10.10.11:8008"); ")
  user_pref ("startup.homepage_welcome_url", "http://10.10.10.11:8008"); ")
  user_pref ("javascript.enabled", true);
  user_pref ("app.update.enabled", false);
  user_pref ("browser.startup.homepage", "http://10.10.10.11:8008"); ")
  user_pref ("accessibility.browsewithcaret", false);
  user_pref ("browser.cache.disk.enable", false);
  user_pref ("browser.popups.showPopupBlocker", false);
  user_pref ("browser.cache.memory.enable", false);
  user_pref ("browser.shell.checkDefaultBrowser", false);
  user_pref ("browser.backspace_action", 2);
  user_pref ("privacy.popups.disable_from_plugins", 0);
  user_pref ("privacy.sanitize.sanitizeOnShutdown", true);
  user_pref ("update_notifications.enabled", false);
  user_pref ("browser.tabs.showSingleWindowModePrefs", true);
  user_pref ("accessibility.browsewithcaret_shortcut.enabled", false);
  user_pref ("plugins.hide_infobar_for_outdated_plugin", true);
  user_pref ("extensions.blocklist.enabled", false);
  user_pref ("browser.newtabpage.enabled", false);
  user_pref ("browser.newtab.url", "http://10.10.10.11:8008"); ")
  user_pref ("browser.tabs.autoHide", false);
  user_pref ("zoom.minPercent", 100);
  user_pref ("zoom.maxPercent", 100);

  Thank you.

  Hello NiteSupport, please try to replace these two lines in your user.js file:

  user_pref("startup.homepage_override_url", "http://10.10.10.11:8008");
  user_pref("startup.homepage_welcome_url", "http://10.10.10.11:8008");
  

  with this line instead:

  user_pref("browser.startup.homepage_override.mstone", "ignore");
  

• Slow to open the first time after startup apps

  Slow to open the first time after startup apps

  How about, the second time, that is, close and reopen?

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.