Translations of Apex 4.2 dynamic Oracle

Similar Questions

• apex installation 5 on oracle 10.2.0.5

  Hi all

  could we install apex 5 on oracle 10.2.0.5?

  Kind regards.

  Maahjoor wrote:

  could we install apex 5 on oracle 10.2.0.5?

  No, as documented in the Setup Guide, APEX 5.0 requires Oracle 11.1.0.7 or later version database.

• apex 4.0 with oracle 11g ee mail

  Hello
  
  I spent when you work with apex 3 I could work with apex mailsend very nice.
  Apex 4.0 with oracle 11g ee, I'm not able to send emails any more.
  
  Last error message in the queue is:
  
  ORA-29279: permanent SMTP error: 550 via this server without authentication.
  the smtp server has not been changed, the code is very well
  
  How can I go further?
  
  Thank you very much
  Florin

  Florin,

  Make sure that you use the relevent to instructions for your version.
  If you use 4.0 - you probably want the same script - with use of APEX_040000 appropriate.

  See the steps of INSTALLATION of document ITEM.

  http://docs.Oracle.com/CD/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBABCC

  -Make sure that you don't drop the former users of apex framework before update or remove them from the ACL. It can cause you problems.

  -Tim St.

  P.S. Take a minute to update your profile so that your name is clear.

  Published by: Tim St. H., December 11, 2012 16:54

• Oracle Apex 4.1 and Oracle 10g installation of the UN steps

  Hello
  
  Oracle apex 4.1 and Oracle 10 g installed has been corrupted. Need Experts suggestion to uninstall both and re install again. Please suggest me. Installation has been performed on the windows operating system 7
  
  
  Thank you
  Sudhir

  Check out the forum before posting questions, you MIGHT find an answer: How to remove and reinstall APEX

  Thank you

  Tony Miller
  Dallas, TX

• Error export/import of the application to the Apex 4.1 on ORACLE 11 g 2 XE

  We have an ApEx application, what is migrated several ApEx 3 times through 3.2 to 4.1.
  There is no problem import/export demand, when we use ORACE 11 GR 2 (SE or EE).
  
  A few days go that put us the application on a database of the XE 11 GR 2. There was no significant or problems by running.
  
  Now, we have changed something and wanted to export the aplication of the database of XE and back to a different database.
  Importing (no questions about the origin of the XE) application or any other edition, we get an error:
  
  p_region_id = > 83466451 p_form_element_id = > null,
  
  *+
  ERROR on line 7:
  ORA-06550: line 7, column 26:
  PLS-00103: encountered the symbol "P_FORM_ELEMENT_ID" when awaits an of the
  Next:
  +), * & = - + <>/ at mod is rest not rem +.
  + < an exponent (*) > <>or! = or ~ = > = < = <>and or as like2 +.
  like4 likec between | submultiset of type multiset Member
  Symbol ',' was replaced by 'P_FORM_ELEMENT_ID' to.
  
  Looking at the source, I found:
  
  declare
  s varchar2 (32767): = null;
  Start
  s: = null;
  () wwv_flow_api.create_report_columns
  P_ID = > 83576346930344697 wwv_flow_api.g_id_offset, +.
  p_region_id = > 83466451 # p_form_element_id = > null,
  p_column_alias = > 'APP_USER2 ',.
  p_column_display_sequence = > 2,
  p_column_heading = > 'Benutzer ',.
  +...+
  
  It is absent from the code in the place where I put the #.
  
  Does anyone has an idea, what's not to export?
  
  We use a GR 11, 2 on OpenSUSE 12.1 Apex 4.1.0 ORACLE XE. The export file is about 2 MB.
  
  Thanks for your help
  Tilman

  If you are still able to access the original (where you got the export)

  try to export on the command-line as well... http://ruepprich.wordpress.com/2011/07/15/Exporting-an-apex-application-via-Command-Line/

  Kind regards
  Richard
  -----
  blog: http://blog.warp11.nl
  Twitter: @rhjmartens
  If you answer this question, please mark the thread as closed and give points where won...

• Upgrade of the Apex 3.2.1 (mod_plsql) at Apex 4.0 with Oracle Listener

  Hello
  We have a few applications in the Apex 3.2.1 (i.e. mod_plsql) which have not been displaced in Production yet. We intend to move to Apex 4.0 with Oracle listener as soon as they are available (we don't want turn on any web server mod_plsql). What will be the migration process? My apps work and look the same when I opened the Apex 4.0? All the features, formatting, etc. will be lost?
  I heard that there is a Migration Wizard, but there is no information available.
  
  When Apex 4.0 and Oracle Listener comes out? Summer 2010?
  
  I would be recognizing all of the information you have on this subject.
  
  Thank you
  Violeta

  A new Forum OTN has been implemented for the listener of the APEX: ADR, SODA & JSON in the database

  Please use this forum for all future APEX auditor positions.

  Kind regards
  David

• Apex 3.2 with oracle express

  Hello
  
  Can I use Apex 3.2 with Oracle Express edition Oracle XE without paying money and without violating the liscence agreement?
  
  concerning
  Hrishy

  As Obama said: Yes you can!

• Is it possible that the installation of APEX is on the Oracle 10 g standard database?

  Hello. Nice to meet you.
  I try to install 3.1 APEX on the standard version of the 10g database.
  APEX 3.1 on Oracle DAtabase 10g standard, not of Enterprice version. Is this possible?
  I really want to know about it.
  Thank you very much!

  Hello

  Yes. No problem. You can even install it on XE (actually it is preinstalled on XE). Just follow the same steps that you did for the EE version.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

  You can assign this answer to your question in marking it as useful or Correct ;-)

• APEX 4.0: Dynamic action problem when hiding point page

  Hello world
  
  I created a dynamic Action that shows/hides a page element.
  When hide it, if this page is a text box, object, which resizes texarea is still visible... as well as quickpicks (as appropriate).
  If point page corresponds to a date, and quickpicks, quickpick labels are invisible, but the commas that separate them are still visible. Fortunately, date picker icon is hidden.
  
  I hope this helps
  Oscar
  
  PS: Tested on apex.oracle.com using IE8

  Hi Oscar,.

  Thanks for this posting. This is a known bug (#9811411) with dynamic stock control show or hide an element of the page currently only the following:
  

  • The item itself (the input, textarea, etc.).
  
  
  • Any other standard compound element (datepicker, color picker icon, all the list items Manager, shuttle elements, etc.).
  
  
  • An element label, if defined in the standard way (tag with an attribute 'for' corresponding to the attribute 'id' elements).

  We do control however no other currently defined attributes in the element definition (pre / post text, quick pick item controls, control center, etc.).

  There is a fairly simple solution, and it is to check the box 'Yes' to the ' show / hide all elements of the page on the same line "in the"Setting"region in the actions of 'Show' and 'Hide '. This will control everything, but the limit that you should not have any other elements on page displayed on the same line, because these will be also shown / hidden by doing this.

  Sorry for this current issue, I hope that the workaround can be useful until we can fix.

  Kind regards
  Anthony.

• APEX 5.0 on Oracle XE installation

  Hi all

  I am trying to install locally with APEX 5.0 on my laptop.

  I installed Oracle APEX 11.2.0. Can someone please tell me what is CBD. ? and what are the values that I need to get into the CBD and the root of the CBD.

  

  I'd appreciate any help.

  Thanks in advance

  The apxpreins.sql file must be in the same directory as apexins.sql, who, in your case, appears to be under c:\apex. You can check that the file can be found with dir c:\apex\apxpreins.sql?  Otherwise, you must decompress the apex_5.0.zip file again and check that the file is there.

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Obtain / use value radio in Apex plugin for dynamic action button

  Apex 4.2

  I'm working on a plugin that you run a dynamic action based on the value of a selected option button. I think its more so the syntax that is causing me problems.

  I have a point page (P127_DISPOSITION) reprsented as a group of radio buttons. There are three cases for the Group of radio buttons: CREATE, update, and THROW. The LOV source for the element on the page is:

  STATIC2: create new Inspection; CREATE, update of existing Inspection; Updated, throw; IGNORE

  I have a plugin that displays a map and a few other neat, tools and toolbars other clever tricks. When a user clicks on the radio button under the UPDATE, the card must hide some of these tools. This part is not so bad that I have the code for this. Here's what I or tried so far:

  $("#P127_DISPOSITION").change(function() {
  if ( $("#P127_DISPOSITION").val == 'UPDATE' )
  $("#draw_point").hide();
  $("label[for=\draw_point\"]").hide();
  } else if ( $("#P127_DISPOSITION").val == 'CREATE')
  $("#draw_point").show();
  $("label[for=\draw_point\"]").show();
  } else {
  $("#draw_point").show();
  $("label[for=\draw_point\"]").show();
  }
  });
  

  The statements in the IF statements are not the problem. I tested and been using these statements in my plugin for other reasons. These statements just to show or hide the toolbar. But I'm doing this action happens dynamically on a radio button is selected. So I know there must be some problems in the way I use the onChange function or the statement real himself.

  Any help on this would be greatly appreciated. Thanks in advance.

  NewApexCoder

  I don't think that your problem is with dynamic action, but how the html code that is generated when the plugin looks like.

  If the generated html code is not a type of entry right front, you need to write your own javascript code that overrights the apex.item () .getValue (default).

  To explain what I mean lets take a look at the native radiogroup and popup lov.

  A radiogroup of point P40_DISPLAY_RETURN of the page html code looks like

  
      
  Different display and return value
      Cat
  
      Cow
  
      Dog
  
      Lion
    
  

  As you can see the element with the id P40_DISPLAY_RETURN is the set of fields. Because the set of fields is not a value attribute neiter $x('P40_DISPLAY_RETURN').value and $('P40_DISPLAY_RETURN').val)

  the value will give you. Apex. Item ('P40_DISPLAY_RETURN'). GetValue() will return the C.

  And for the lov contextual element P40_POPUP_LOV of the HTML page looks like

  Now the P40_POPUP_LOV element is an input element, but the value is the value to display. So $x('P40_POPUP_LOV').value and $('P40_POPUP_LOV').val () will give you the display value ' OHare, Edward "Butch" While apex.item('P40_POPUP_LOV').getValue () returns the return value 4.

  Take a look at the getValue for both javascript code, you see that the functions are actually different and depend on the widget that is the element.

  getValue : function() {
    // get checked input value, in the context of the fieldset
    // note: can't use $lRadios here because this is a reference
    // to the initial state
    var lReturn, $lRadio;
    if ( pType === "checkbox" ) {
        // checkbox will return an array
        lReturn = [];
        $( ":checked", lFieldset).each( function() {
            lReturn[ lReturn.length ] = this.value;
        });
    } else {
        // radio group should return a single value
        $lRadio = $( pSelector + " :checked", apex.gPageContext$ );
        if ($lRadio.length === 0) {
        // check if the length of the jQuery object is zero (nothing checked)
        // if so return an empty string.
            lReturn = "";
        } else {
            // otherwise return the value
            lReturn = $lRadio.val();
        }
    }
    return lReturn;
  }
  

• Apex 4.2 with Oracle HTTP Server 12 c?

  So, we have already implemented Oracle APEX with Oracle HTTP Server 11g Oracle WebTier utility. These are all works well.

  However, we wanted to try with the latest version of the stand-alone version of HTTP. So, we installed and configured the server for HTTP from Oracle 12 c (Stand Alone). However, we do not find instructions for things like where to copy the images, which dads.conf to edit etc. The current facilities seem to be oriented with the older, version 11g.

  Someone at - it a source for instructions to update configuration APEX with Oracle HTTP Server 12 c?

  Thank you

  -Joe

  Joe,

  Check in the documentation http://docs.oracle.com/cd/E16655_01/install.121/e17958/db_install.htm#HTMIG230

  Leave.

• Copy an application translated into APEX

  Hello world

  I have an application translated into the Apex, my version of the Apex is 4.2.1.00.08. The application is in production version, a lot of people use it every day. The main language of the application is in English, and there translations in 5 languages. Everything works fine now; even if there are minor changes in demand, we are able to seed it, download the XLIFF files and that publish the changes in all translations. Simple so far.

  My problem is that I wanted to "clone" of the application, including his translations to a new because I intend to rebuild some parts of it. I want to keep the current version intact, do not disturb users.

  The new application should be in the same workspace, with a new code. I tried a couple of approaches:

  • Copy the main application by enabling the option 'copy the translation' - this creates a new application and also seems to create new applications translated, that are empty (not buttoned, unpublished).
  • Export the main application and to import it with a new application ID defined manually do the same with the translated applications and set the ID correct part translation of mapping of shared components > translation. When I try to run the main application, it works, but for the translated versions... Only an error saying that there is no such thing as the application page.

  The goal is to clone while maintaining the connection between the primary and the applications translated, so that if I change something in the main application, it can be planted in those translated later. At the same time, I want to keep the translations as well, since there are thousands of channels...

  Can you give me some advice? Anyone who has managed to do it before?

  Thank you in advance,

  Adam

  Hi Adam,.

  as far as I know it is not possible to copy to a new request ID translations.

  I guess that's because in-house translations use the same id to their components such as the main application, just with the hand-application-id has added as decimal (ie: 38342893472.103). Copy the application to a new application id also changes all internal ID and thus the translated applications are not related more.

  Sorry to not be more useful...

  Peter

• APEX 3.2 - Dynamic Actions

  Hello
  
  I know that we can apply actions dynamic apex 4... can we do something similar in 3.2... Otherwise, what is the alternative...?
  
  Thank you

  Hello

  Dynamic actions are introduced on Apex 4 and there not something similar on Apex 3.2.

  But you can write your own JavaScripts. See for example this
  Apex 3.2 hook javascripts for IR and run the when the report is refreshed

  Kind regards
  Jari