Translucent rectangle on the files which were recently clicked (does not disappear after clicking somewhere else.

Similar Questions

• HP DESKJET 4645: HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

  HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

  Hello, @ghlowell,

  Thank you for the update. You can get the serial number of the printer using the HP utility on your computer. You must have the printer software installed to get the same thing.

  Try the following steps to get the serial number.

  • Go to 'Finder' - select 'Applications' - folder Select "HP" or "Hewlett Packard".
  • Now find and open the "HP utility.
  • Click on "device information. Ideally, this should give details of the printer including the serial number.

    

  Let me know if this helps. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• The Oracle optimizer automatic statistical work does not run after full import

  Hi all
  
  I did a full import in our QA database, import was successful, but GATHER_STATS_JOB does not work after sep 18 2010 if its activation and on demand, I question last_analyzed table to check and confirmed that he has not run after sep18, 2010.
  
  See below for the output
  
  OWNER JOB_NAME HIS STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
  ------------ ------------------------------ ----- --------------- ---------- ---------- ------------------- ----------
  SYS TRUE REGULAR GATHER_STATS_JOB 2010-09-18 06:00:02
  
  
  Collection of statistics work defined automatic optimizer Oracle
  
  =======
  
  SQL > select JOB_NAME, STATUS, OWNER, REQ_START_DATE,.
  TO_CHAR (ACTUAL_START_DATE, ' dd-mm-yyyy HH24:MI:SS) ACTUAL_START_DATE, RUN_DURATION
  of dba_scheduler_job_run_details where
  job_name = order of 'GATHER_STATS_JOB' by ACTUAL_START_DATE asc; 2 3 4
  
  OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
  ------------ ------------------------------ ------------ ------------------------------ ------------------------------
  RUN_DURATION
  --------------------
  SYS GATHER_STATS_JOB MANAGED 16/09/2010 22:00
  + 000 00:00:22
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-17 22:00:02
  + 000 00:00:18
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-18 06:00:02
  + 000 00:00:26
  
  
  What could be the reason for the GATHER_STATS_JOB job does not although his game to automotive
  
  SQL > select dbms_stats.get_param ('AUTOSTATS_TARGET') of double;
  
  DBMS_STATS. GET_PARAM ('AUTOSTATS_TARGET')
  ------------------------------------------------------------------------------------------------------------------------
  Auto
  
  Someone has this kind of experience, please share
  Apprecitate your answers
  
  Concerning
  SRH

  ? So basically you're saying is if none of the tables are changed then GATHER_STATS_JOB will not work, but I see tables are updated again the task does not run. I did > dba_scheduler_jobs request and the State of employment are true and regular. Please see my previous post on the output

  Am I missing something here, I get some parameters parameters

  So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not work.

  GATHER_STATS_JOB will take place, and if there is no table in which there is a 10% change in the data, it will bring together statistics on this table. If no data in the table have changes less than 10 percent, it will bring together not statistics.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#i41282

  I hope this helps.

  -André

• FSG Patches - product is registered in the database, but the file (zsaprod.txt, jtsprod.txt) does not exist in APPL_TOP

  Hello

  I recently updated 12.1.3 and solve some problems and by Doc-ID 189282.1 -FSG paches, I install "Patch 17066098: R12.1: General Ledger Recommended Patch Collection (FSG), Sept 2013" which calls for the installation of ""Patch 16012307: Fsg Drilldown returns no data when using Ledger balances Mult set with " "

  Doc ID 189282.1 calls for three patches, 17066098:R12.RG.B, 16012307:R12.GL. B and 16266400:R12.RG.B

  I installed successfully 17066098:R12.RG.B

  Patch 16012307 failed on 1 worker with

  gl_drill_account_ranges_gt  FAILED

  Worker errors are:

  Worker AD cautions:

  Product data file

  /U02/applfind/apps/apps_st/appl/Admin/zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Worker AD cautions:

  Product data file

  /U02/applfind/apps/apps_st/appl/Admin/jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  How to solve this?

  Thank you

  Mathias

  Mathias,

  This mistake is addressed in the following documents.

  Patch 16012307 Down on GL_DRILL_ACCOUNT_RANGES_GT. XDF with error ORA-01722 and ORA-06512 (Doc ID 1573185.1)

  ACP: Patch Is Failing ORA - 01722 Xdf meets (Doc ID 1267587.1)

  Patch 12312729 Is not running because of the ORA-01722: invalid number (Doc ID 1356468.1)

  11.5.10.2 to 12.2.0 upgrade failed in the MEP files (Doc ID 1620806.1)

  Thank you

  Hussein

• Function of the file/etc/Upload of an open file of the application, using the file as a utility Explorer, does not work on my Win7 PC.

  If I run the file Explorer (open) by itself right clicking the my computer icon on the desktop, or work when I double click on the shortcut to My Documents on the desktop, all files are visible (except the system and hidden files, by default, of course). I don't think it's File Explorer itself, for reasons described. It must be an add-on, or ACCELERATOR, as it is called when this functionality is provided for other applications or the Internet Explorer browser. 10, IExplorer even the fact when I want to attach a file to an e-mail in the tab of the mail.live.com browser or dialog box that prompts for a download location and the source file. The only place where I can browse the file Explorer to display its content, is the office. I have automatic updates for all my Windows software installed on my PC, as well as for all my applications. This happened for months, and the only work around is to copy the files to the desktop, take them out there in my app/browser and then delete. It's a pain in the thigh not only because of the increased workload, but also because my OS is running on a very small SSD drive (128 GB), reserved for the windows and the user * he pours on the system drive. All this extra activity write/erase on my system drive is exhausting the ability of my SSD FLASH prematurely. All my software is installed (when installing allows) on my D: drive, but it has been so since I ran Windows 98, it is NOT the cause of the problem. Any help will be appreciated!

  Hello

  We will analyze and identify the cause of the problem.

  Method 1:

  You can run the Fixit described in the article:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag

  Method 2:
  

  Safe mode

  
  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Response with status so that we can help you.

• The drive letter for the files on my external drive does not match the designated letter MyWindowsApp, after briefly changing pots

  On my Windows 7 laptop, I briefly moved an external hard drive to a USB port to another and then back.

  The reader is referred to as F, as it was originally, but since the temporary move the path for some files now show that E.

  I went to disk management and confirmed that the drive is detected as F.

  This disrupts programs such as Adobe Premiere Elements. It always hurts new information loaded in the disc I load that is in F, but the said path E. The file is clearly on record.

  Hello

  I see that, after changing the port, the drive letter for the external drive has changed. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  You can follow these steps to assign a letter to the external drive and check if that helps.

  1 - click on 'Start' button.

  2-right-click on "Computer" in the list that appears.

  Option 3 - Select the 'manage '. If a warning appears asking for your permission to continue, click on the OK"" button.

  4 - Choose "Disk management" in the left column of the computer management window. Find the USB in the list that appears in the gray bottom of the center column.

  5-click right on the part of the screen that represents the USB key, and then click the option "letter of change of road and railways.

  6 button - click on the 'change' in the window that opens.

  7. ensure that the radio button to "assign the following drive letter:" is selected. To the right of the present is a drop-down list with the drive letters currently not assigned to all of the drives on your local system. If you are not on a network, choose the drive letter you want for your USB key and then click on the OK"" button.

  8 - click on the 'yes' button in the confirmation box that appears.

  Refer.

  Change, add, or remove a drive letter: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps.

• After the installation of the file xlr on windows 7 does not open xlr files

  Hard drive on my old laptop crashed. has been able to recover the documents xlr and intalled on a new laptop running Windows 7. XLR files does not open. Help! Here are the spreadsheets Excel NOT works.

  Do you have work on your new machine?

• try to delete the file opm.db but it does not work?

  OK so I'm stuck with an old email on creative cloud and I'm trying to close the session and it says I have to delete opm.db but everytime I try to delete it says it can not be deleted because the file is opened to service adobe apps... I really don't understand what I need to do? Help, please!

  Masha, please close creative cloud before deleting the file opm.db: Creative Cloud Desktop application FAQ

  hope it would help.

• Harvest of the files (xsd/wsdl, etc.) does not

  Hello world
  
  I'm trying to collect the files and directories of BPEL projects via putty
  
  The command I use is:-
  
  *./Harvest.sh-URL http://172.18.79.90:7101 / oer1-user admin-password v2_1.G + NTr3az8thaGGJBn0vwPg == *.
  -file /home/oracle/SOAApplication/SOABpelProject/xsd/Employee.xsd
  
  v2_1.G + NTr3az8thaGGJBn0vwPg is here is the password that is generated in the HarvesterSettings.xml file after running fichier./encrypt.sh
  
  but I get the below error: -.
  
  com.oracle.oer.sync.framework.MetadataIntrospectionException: com.oracle.oer.sync.framework.MetadataIntrospectionException: cannot read file plugin: /home/oracle/soa_new/repository111/core/tools/solutions/11.1.1.6.0-OER-Harvester/harvester/./plugins/task.introspector
  at com.oracle.oer.sync.framework.MetadataManager.init(MetadataManager.java:310)
  to com.oracle.oer.sync.framework.Introspector. < init > (Introspector.java:201)
  at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:428)
  Caused by: com.oracle.oer.sync.framework.MetadataIntrospectionException: cannot read file plugin: /home/oracle/soa_new/repository111/core/tools/solutions/11.1.1.6.0-OER-Harvester/harvester/./plugins/task.introspector
  at com.oracle.oer.sync.framework.impl.DefaultPluginManager.processIntrospector(DefaultPluginManager.java:127)
  to com.oracle.oer.sync.framework.impl.DefaultPluginManager. < init > (DefaultPluginManager.java:73)
  at com.oracle.oer.sync.framework.MetadataManager.init(MetadataManager.java:308)
  *... more 2 *.
  Caused by: com.oracle.oer.sync.framework.MetadataIntrospectionRuntimeException: error: could not find the type of assets in REL: 898dd147-3680-11de-bee0-79d657a0a2b0.  Please ensure that the harvester Pack Solution is installed in OER.
  at com.oracle.oer.sync.framework.MetadataManager.putAssetType(MetadataManager.java:213)
  at com.oracle.oer.sync.framework.impl.DefaultPluginManager.processIntrospector(DefaultPluginManager.java:104)
  *... more 4 *.
  
  can someone help me please to solve the issue?

  Please ensure that the harvester Pack Solution is installed in OER.

• Delete the file as an attachment button does not work

  I have a form with a box the user can attach files. There are three buttons. To add a file to open the file to see it and the third button to delete the file that is highlighted in the drop-down list. Remove the button does not work. You see something wrong with my script?

  ADD A SCRIPT FILE

  MeetingMinutes.LogoControls.Attachments.Button1::click - (JavaScript, client)
  myDoc = event.target var;
  sFile var = "myFile" + NumericField1.rawValue;
  myDoc.importDataObject ({cName: sFile});
  myDataObject var = myDoc.getDataObject (sFile);

  sFileName var = myDataObject.path;

  ListBox1.addItem (sFileName, sFile);

  NumericField1.rawValue = NumericField1.rawValue + 1;

  OPEN THE SCRIPT FILE

  MeetingMinutes.LogoControls.Attachments.Button2::click - (JavaScript, client)
  try {}
  myDoc = event.target var;
  var sFile = ListBox1.rawValue;

  myDoc.exportDataObject ({cName: sFile, nLaunch: 2});
  }
  catch (e)
  {
  App.Alert ("Click on the file you want to open (select)," + "\n" + 'then click on the button to open the selected file' ");
  }

  REMOVE THE BUTTON SCRIPT

  MeetingMinutes.LogoControls.Attachments.Button3::click - (JavaScript, client)
  try {}
  myDoc = event.target var;
  var sFile = ListBox1.getDisplayItem (ListBox1.selectedIndex);

  If (sFile! == "") {}
  var nResponse = xfa.host.messageBox ("you are about to delete the attached highlighted file. \n\nDo you want to continue? ', 'delete an attachment ", 1, 2);
  If (nResponse == 4) {}
  myDoc.removeDataObject (sFile) + ListBox1.deleteItem (ListBox1.selectedIndex) + (NumericField1.rawValue = NumericField1.rawValue - 1);
  }
  } else {}
  xfa.host.messageBox ("no document selected. Click on the file to delete. ») ;
  }
  } catch (e) {}
  xfa.host.messageBox ("error in deleting of document");
  }

  Change var sFile = ListBox1.getDisplayItem (ListBox1.selectedIndex);

  TO

  var sFile = ListBox1.rawValue;

  Kyle

• Develop the mode in Adobe Lightroom CC does not properly after reinstall.

  I recently had to switch computers because of an accident of BSoD on my main laptop edition. I could recover my photos and I installed CC Adobe Lightroom on my temporary until I can get a new one. When I open Lightroom, all seems well until I can get to the point. Then the picture is viewed on the screen, it shows a very distorted and looks like it was taken in infrared or high intensity histogram colors. The preview box in the left corner and the roller on the bottom of the screen looks normal, but the editing screen is not the original photo. Help.

  Hi Erin,.

  • Please select Edit > preference > Performance > uncheck "use graphics processor.
  • Restart Lightroom.
  • If this dioes does not help post screenshot of the problem

  Let us know if this helps

  Concerning

  Assani

• Why my sequence does not disappear after the export of the project?

  After a late night of editing, I made and exported the project (mp4). This morning the customer requested a change, but when I open the project, media source is here. There is no sequence, and I could not find the file. Suggestions?

  (First project in Premiere Pro after several years of use of Premiere Elements).

  the sequence should be there, but I have nothing.

  Well, the only two possibilities are that you just have not yet found, or someone really delete.

  If you remember the name of the sequence, you can search for it at the top of the project Panel.

• The scheduled scan output of McAfee does not work after update to W - s7

  Hello.After upgrade to W - s7 scan-out expected of McAfee Total Protection 2010, a license does not work on Toshiba Upgrades.Support McAfee program not able to help, worked 3 hours and sent in support - Russian? for us, it is not present. Perhaps who fell on a problem as well. I'll owe for any information. Thank you

  >... does not work on Toshiba upgrade program
  What program does? AFAIK the upgrade Toshiba travels TEMPRO.
  We think the same?

• Why my app store does not disappear after the update to 9.2.1?

  After that I updated my iPod touch 6th generation iOS 9.2.1 My App Store has disappeared. Can you tell me why the App Store could do something like that?

  Looks like that the Restrictions had lit so that the App Store. Go to settings > general > Restrictions and see if the App Store options are enabled under "allow". If they aren't, turn them on and your App Store icon again.

  See you soon,.

  GB