Transparency will not work and Aero is dead.

Similar Questions

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Defener Windows will not work and will not allow uploaded files to open, saying: they all have a virus. How can I solve this problem.

  Running Windows 7 and I cannot scan my computer or download files, system tray blushed and said, 'the file contains a virus' and the computer, and then delete the file. In the alert section it says that Windows Defender works. But it will not open Setup or scan. try to get a repair tool and the file does not open, he repeats to me, the file contains a virus and it does not open. What can I do other than to bring this problem to the experts. Maybe someone has an answer.

  Thanks, D G

  Your PC may be infected with the new variant of Sirefef AKA Zero access is.  One of the problems is that the downloads are identified (wrongly) as a virus... and it will be often disable and prevent installation of various anti-malware programs.

  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Win32%2FSirefef

  Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer.  Hitman Pro Kickstart is available as a 30 day trial version.

  For more information, see http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf

  And

  http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html

  The Windows Defender program which is pre-installed on W7 and Vista is an antispyware program only... .you must run a program full anti-malware.

  http://www.techsupportalert.com/best-free-anti-virus-software.htm

  http://www.dslreports.com/Forum/r28298407-2013-anti-virus-poll-

  http://www.AV-Comparatives.org/

  http://ask-Leo.com/what_security_software_do_you_recommend.html

   

  See the following compliments of quietman7 MS MVP : choose an anti-virus program

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• Windows Paint text installation will not work and the 'A' accentuates not when the cursor passes over it

  I just wanted to put some txt on photo paint open so imported the scanned picture and everything else works, but the ease to enter text. Move the cursor over the 'A' does not the highlight box around him upward and toolbars from view has the text one checked but dimmed down. Is the same for an empty document in the paint.

  Two ideas...

  (1) Vista paint text button does not work:
  Reach... View / Zoom / Custom / 100% / OK

  (2) I was wondering after leaving by clicking on the 'A '...
  What happens if you move the pointer over
  the picture and left click or drag to create a
  TextBox?

  The following links may be useful:

  Windows Vista-
  Open Paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Paint

  With the help of paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  Paint tools
  http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

  How to rotate an Image using Microsoft Paint
  http://maximumpcguides.com/Windows-Vista/how-to-rotate-an-image-using-Microsoft-Paint/

  Microsoft Paint-
  How to add text to digital pictures in Vista
  http://www.ehow.com/how_5841367_add-text-digital-pictures-Vista.html#ixzz1lC2YSoS8http :// www.ehow.com/how_5841367_add-text-digital-pictures-vista.html

• Delete a file called "wre.exe", now two of my virus scanners will not work and nor does internet Explorer, how to fix?

  I took my computer to the shop twice to fix the same virus, and then I got it again. This time, I decided to try to fix myself because obviously they couldn't do it, despite having taken $200 from me.

  my mother gave me Norton antivirus, and its history has shown me where the file kept showing in taskmanager, so I went there and deleted. the virus seems to have disappeared and to a large extent, my computer seems to work but I can't run microsoft security essentials or antimalware bytes. haven't tried my other programs yet, but I know that I can still read PDF files, and I can see my photos. the icon of internet explore doesn't work, I got in line to say things to try to find the file online. whenever I try to go online, or use one of my two antivirus, it tells me to choose a program to use to open it.

  is there anyway that I can fix this? really get rid of the virus? I can't afford to have this fixed thing again, and of course, they are unable to him anyway.

  If you like not what it was, I think it was called xp antivirus 2012 or something similar.

  in fact, its virus programs not only blocking, his block anything that does not use another program to run, like adobe or realplayer. I am sure that it changed something. I'll try this thing to scan in any case, just to see if it finds anything. If it isn't, I have no choice but to do a complete reinstall of windows.

  is there a risk to the installation of an operating system from an obsolete drive severely? as in will be my computer be infected again until he finally update all the way?

  First of all, you can not delete a file by using the Task Manager. You can choose to terminate a process but cannot remove a file that you have indicated above in your initial post.

  Second, you can't have the two Microsoft Security Essentials and Norton installed on the same machine. Conflict reducing your coverage and possibly even cause a blue screen.

  Thirdly, you are unable to open due to the malware programs change you file associations of executable files.

  Fourthly, you have problems to connect to the internet most likely because the malicious software modified your internet connection settings.

  It will be easy to fix if you follow my instructions carefully.

  With the help of a good working computer and flash drive you mentioned above download the four files below save them on the flash drive.

  XpExeFix.reg

  RKill

  RemoveProxy

  Malwarebytes< it="" doesn't="" matter="" that="" you="" may="" already="" have="" malwarebytes="" downloaded.="" use="" the="" one="" on="" the="" link="" i="" provided.="" it="" has="" been="" renamed="" to="" allow="" it="" to="" run="" on="" infected="">

  Now take the flash drive for infected patients. Open the flash drive. Right-click on XpExeFix.reg and choose merge. Confirm the prompt. You should receive a message that the information has been added to the registry.

  Then, double-click RemoveProxy and run it. Once the operation is completed, you should be able to access the internet. If you are unable to run the file go to the step below and run RKill and then return to this step.

  Then, from the flash drive double click on RKill and choose to run it. It may take a while to complete but, just let it run. You will get a window similar to that of the command prompt and must be informed when the process is complete.

  Once the RKill completed, double-click Malwarebytes and choose to install it. Update to update the installation, then run a full scan. Remove any detected object. If you are unable to update just for some reason any run it.

  Post when you have completed these steps for additional instructions.

• My logitech keyboard will not work and its new brand

  IM typing on keyboard on screen, I just bought a new keyboard and it won't work at all

  The drive itself seems to be OK - but you had some fairly significant problems that CHKDSK has settled, and there are perhaps still benefits from that.

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is

  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
   
  Wait for that analysis at the end - make a note of any error messages - and then restart.

• AAM will not work and will not install

  Today, I decided to apply pending updates. Creating sales Cloud on OS X 10.8.2.

  I ran Adobe Application Manager (AAM). I see (it is missing or damaged):

  

  Fine. I click 'Get' and then get redirected. I have download ApplicationManager6.2_all.dmg. I ride. I navigate to the installer. I run it. I get this (what the Installer failed to initialize):

  

  Fabulous. I have download Adobe Support Advisor. I run it. He thinks that everything is fine.

  I rebooted and tried again. I usually google and searched this forum until blue in the face. I sat down with Adobe Live Support for 30 minutes, while I was given only to be disconnected. And here I sit.

  Very functional, Adobe. Even better support, too.

  Someone has an idea how to solve this problem, given that Adobe can't be bothered with it?

  After spending nearly an hour with an Adobe support representative via live chat this morning and leads precisely nowhere, I gave-up, closed my browser on him, knocked down all the changes he had me had to do and decided to try on my own brute force methods. I should have done that to begin with, but since I'm still relatively new (~ 1 year) for the Mac, I'm still a bit shy.

  In any case, I finally managed to solve my problem, and the particular difficulty who worked did so in about 60 seconds flat. Nevermind, I spent literally hours chasing my tail to access:

  1. Put yourself in the Finder/applications/utilities
  2. Rename the file "Adobe Application Manager" to something like "Adobe Application Manager OLD" (even if I think it might as well be deleted)
  3. Install the download for the AAM package and run the installation program

  MAO then (not surprisingly) worked well. Delete the old folder now.

  I continue to be completely impressed by the ability of Adobe to support its customers, but is by the course more, so I was not surprised. On the good side of things? Work of AAM and I can finally update my applications.

• System Restore will not work and the "users" folder disappear from library after updating NVIDIA graphics

  I have 2 problems: when update nvidia geforce "users" folder disappear fron win library.it appear when im looking with the command: C\users etcThe second problem is system restore failed when ive trying to restore to earlier driver.what can I do? the folder is not show when choise the "show hidden files", I have win 7 ultimate

  Hi Vasilisnikolo,

  1. What is the brand and model of your system?

  2. did you try to use a disk or downloaded the drivers from the Nvidia site?

  3. what exactly happens when you try to perform the system restore?

  4. you receive messages or error codes?

  You can try to uninstall the drivers Nvidia from the system completely and consult Web of Nvidia site to install the latest version of the drivers.

  Step 1:

  Uninstall the drivers from Device Manager.

  a. click Start, type Device Manager in start search box and press enter.

  b. expand the graphics card, right click on the device and select uninstall.

  Step 2:

  Alternatively, you can try to uninstall the drivers from programs and features.

  a. Click Start, type appwiz.cpl in search and press ENTER.

  c. Locate the Nvidia driver package and uninstall the package

  d. restart the computer.

  You can check the Nvidia site and try to download and install the latest display drivers.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  After having reinstalled the drivers check if it helps.

• After downloading student Office 2010 my HP1660 will not work and says it is not connected

  I run Windows 7 and recently downloaded MSN Student Office 2010. Now, I can't use my printer HP1660. Initially it had completely disappeared from my choice so printers I redownloaded it, but now it says that it is not connected.

  Hello

  Please download and run the printer doctor tool to find and fix your problem

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-129932-1/HPPSdr.exe

  If above does not solve the problem, you can try a few things that can help solve the problem

  1 make sure that your system is up to date. Do a windows update that allows to get alll last updated.

  2. once step 1 done, restart the PC and get the latest version of the software from hp.com. You can also use the installation wizard HP that help get the latest version of the software for you.

  http://ftp.HP.com/pub/softlib/software12/COL50403/MP-122330-1/hppiw.exe

  3. If you still experience the problem, you can do it manually "Add Printer Wizard". Here are the steps:

  1. open devices and printers, click the button start picture of the Start button, and then on the start menu, click devices and printers.

  2. click on add a printer.
  In the Add Printer Wizard, click Add a network, wireless or Bluetooth printer.

  3. in the list of available printers, select the one you want to use, and then click Next. (If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list).

  4. If prompted, install the printer driver on your computer by clicking on install driver. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5 complete the additional steps in the wizard and then click Finish.

  Now you can start printing...

  Good impression.

  Good impression

• Creative cloud will not work, and yet I'm connected and released. It all started when my updater CC would not update

  It started when my updater CC would not update. I went to help adobe forums and finally started the process to uninstall/reinstall.  The specified item was not found.

  Now I can't find a download for the CC updater. I am now without a creative cloud connector.  I am always connected to LR however.

  OK a google search to download updater creative cloud made me to the right spot. Adobe in my OP page apparently needs to reinstall link updated. I new CC and he's going through the motions. I have not lost any applications, files, fonts, etc... in the process

• Upgrade will not work and I can't use my email because of it

  For a few months now, I get a message saying that I need to update my Mozilla browser. When I go to my email (live account via hotmail) it says that I have to put my browser. So I tried several times with no luck.
  It becomes old enough to have to look at the email address on a kindle or a phone, I can look on IE but I have other user accounts, so I have to log in and out all the time out there.

  Which fixed my problem, thanks a lot!

• My setup of the printer will not work and Fire fox shows only blank pages. Help?

  I tried to change the margins on my printer set up. Since I did my printer will only print blank pages of Firefox. (If I open a PDF file it prints well) I tried to go back into all of the printing, but it is only as a large black page. Any thoughts?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer