Transport http - problem with timeout
HelloI have a Bussines services that uses the Http transport and its configured with the ending "http://90.56.154.45:989 / offline1".
It's the rest of the config:
/************/
General configuration
Type of service no matter what XML Service
Transport configuration
Http protocol
Load balancing algorithm no
Endpoint URI
http://90.56.154.45:989 / offline1
Retry Count 0
Retry interval iteration 0
Start Application Yes errors
Configuration of HTTP Transport
Timeout 5
Query HTTP POST method
Authentication no
Proxy server
Follow redirects HTTP DISABLED
Use segmented Mode streaming
Content of message, Configuration management
MTOM/XOP support disabled
Page attachments to disk no.
/*************/
When I try to sbconsole, the connection lasts about 3 minutes. Why not meet the deadline set to 5 seconds?
Thank you very much, greetings.
But the setting of timeout (timeout = 5 sg) still not come into force. It may be a possible bug?
Only the timeout setting is actually to READ timeout. So if the target server takes longer than the number of seconds that you have configured in the timeout parameter, then only this setting will take effect. Like currently, you are not able to even connect (connect timeout came into picture), that's why READ timeout isn't triggering because READ has not even started.
It works as expected and there is no problem with the setting.
Kind regards
Anuj
Tags: Fusion Middleware
Similar Questions
-
Problem with timeout when connecting to wifi
Although my laptop connects to other networks wifi (unsecured), it does not connect to my wifi network at home. The error message says that the wireless card has failed due to timeout. The Atheros 5700 card reports that it works correctly. I tried several fixes suggested as the reinstallation of the drivers, etc.. Microsoft asatap adapter has disappeared from the list of cards and will not reinstall.
Any suggestions?ChetHi Chet,
Welcome to the Microsoft community.
From the description, seems that you are not able to connect Wifi for home secure Wifi network.
1. what version of Windows you have on your computer?
2. it worked before?
Method 1: You can try a system restore to the date that it worked:
System restore
http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore
Method 2: Reinstall the drivers:
a. go to Control Panel
b. open the Device Manager
c. uninstall the network card and restart the computer
(d) download and install the driver from the manufacturer's website
Post back with the result. If the problem is still not resolved, we will be happy to help you further.
-
What is the problem with my http code?
I have a problem with the following code on the Bold 9700. The code works on the Simulator and other devices, but some users have problems. It seems that nothing is returned when getting the html page.
static String get_page(String url) { StreamConnection s = null; InputStream input = null; try { s = (StreamConnection)Connector.open(url); input = s.openInputStream(); byte[] data = new byte[4096]; int len; StringBuffer raw = new StringBuffer(); long startTime = System.currentTimeMillis(); while ( -1 != (len = input.read(data)) ) { if (len > 0) { raw.append(new String(data, 0, len)); } // check for timeout waiting for server; or // what if page never closes... if (System.currentTimeMillis() - startTime > 30000) { s.close(); return("ERR2"); } } s.close(); return(raw.toString()); } catch (Exception e) { return("ERR3"); } finally { try { if (input != null) input.close(); } catch (Exception e) { } } }
Y does it have that none of the Options application settings must be defined? for example: TCP/IP
The Thread I pointed you to and the various "required reading" material, describes how the different network paths are selected by changing the suffix of the URL used connection. The standard demo does not add a suffix, by default, choose BES connection, so will be. Unless of course, the carrier has provided a different default value for a feature not BIS, for example, I understand that Vodafone UK will send it via WAP.
According to the treatment of suffix / default connection, the request will be routed through a number of "gateways" like BES/MDS or the carrier's WAP gateway. If any of them could give the 500.
Assuming that it makes actually to your server (I assume this is a URL that you control), then the 500 from the treatment of your Web. For example, this could be because your processing wait some headers in the http request which are not provided. Or, that demand has been sent by a gateway changing the headers in a way that is not pregnant with your web server.
With same URL work on the browser is unfortunately not much of a test as it can be routed through a method of communication that you do not use (for example, on Vodafone BIS devices I think the default browser will use BIS - B) and, in addition, it could provide some headers for the http connection that you do not provide.
The point really is that there are many places that could break this code. And there are number of variables, including what method of connection is used (and in the case of Vodafone, effectively forced to use), which carrier is used and which headers were provided.
But I think the first thing we do is to know who is giving you the 500. If you can follow the application to your own server, so much the better. If you can not, in the headers that come back with 500, you should some server information. The dump out., empty the suffix of connection you use and if possible, get the log records from at the time this was done (which confirms the method of connection actually used).
I also search this forum for more information on issues people have had with the carriers. I know that there is some information on Vodafone UK. According to me, that there is still something at least another carrier.
Sorry, comms on the BB is not as simple as that...
-
Problems with HTTPS access site after upgrading to FireFox 30.0
I have problems to access our HTTPS Corporate sites after upgrade to FireFox 30.0 of the Mavericks MAC or receive an error message "user not authorized" or the page does not load. I was able to access Web sites mentioned above when you use 29,0 FF. I have read and tried all the items on support to clear the cache and cookies, remove and reinstall the software, trying to change the SSL level & remove the cert8.db and cookie files in the profile.
Internal just to validate that it was not a problem with our Web site, I tried and was able to access these sites via Safari for MAC Mavericks. I'm looking for what anyone help possible.
Thank you
JimMany issues of the site can be caused by corrupted cookies or cache.
- Clear the Cache
Press < Alt > or < F10 > to display the toolbar.
Followed;Windows; Tools > Options
Linux; Edit > Preferences
Mac; name of the application > PreferencesThen Advanced > network > content caching Web: clear now
and
- Delete Cookies
Press < Alt > or < F10 > to display the toolbar.
Followed;Windows; Tools > Options
Linux; Edit > Preferences
Mac; name of the application > PreferencesThen confidentiality.
Under historical, select Firefox will use the custom settings.
There is a button on the right side, called View the Cookies.If there is still a problem,
Start Firefox in Safe Mode {web link}
While you are in safe mode;
Press < Alt > or < F10 > to display the toolbar.
Followed;Windows; Tools > Options
Linux; Edit > Preferences
Mac; name of the application > PreferencesThen Advanced > General.
Find and stop using hardware acceleration.Dig safe web sites and see if there is still a problem. Then restart.
-
I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.
My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.
-
Original title: Windows Live Hotmail only opens a new window links e-mail composition!
I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!
Thank you
Ryan
Hi Ryan,
1. you receive messages or error codes when you access Windows updates?
2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?
About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:
Method 1:
Resolve security issues to protect and secure Windows automatically
The problem with Microsoft Windows Update is not working
Method 2:
You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:
-
Http, https, ftp with error code 12007 problems.
The problem started after a virus attached. I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help. I used Malwarebytes to clean up. I can't uninstall microsoft essentials. It does not work and my firewall is disabled. I can't install new software for safety due to being offline with the net. Needs help!
The problem started after a virus attached. I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help. I used Malwarebytes to clean up. I can't uninstall microsoft essentials. It does not work and my firewall is disabled. I can't install new software for safety due to being offline with the net. Needs help!
Restore the system to factory settings.
Even though I know you love clean and keep all your installed applications to configure how they are and without having to restore your documents/photos/music/emails/contacts/bookmarks and others of your last backup - but the truth is that if you're having this much of the problems already - virus/malware that attacks you and infested/infected you probably had friends and probably did permanent damage.
You can try to do a cleanse to get to a point where you can save some extra stuff. Some of them you may need to use another computer to download stuff on and then transfer it on this machine. At the end of the day - is the only way to be sure you're 100% 'good to go' has restoring factory.
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
Problems with HTTPS and javascript widgets
My HTTP site works fine, but when I switch to HTTPS, I get the following error...
MuseJSAssert: Error calling the function switch: TypeError: E.split is not a function
I have even tried to create a simple page with nothing else than a javascript widget, and I still get the error when you use the HTTPS version.
FYI - I upload my pages using the 'upload to the FTP host.
Muse and HTTPS is not compatible?
It is more likely a problem with your server as a problem of cross-site script because the HTTPS protocol uses a folder or a different domain and browser security mechanisms as long as the server itself remove access to the script so. If there is a specific secure folder on the server, import is your files, otherwise, you will need to set an option in the web interface to allow HTTPs and normal HTTP access to your folder.
Mylenium
-
Problem with some http addresses
Situation
Toshiba Satellite A60
The Wi - Fi PCMCIA card: D-Link DWL-G650 and X-micro
Unit up-to-date soft.When connecting via the WiFi card some pages are not open, but the same pages are open during connection of 100 Mbps cable?
Any help?
Hello
It's very strange. Wireless card you have has very good performance. In my opinion there must be problem with the security settings for your card. Check it out.
If the laptop and card work properly there is not another explanation for this case.
Good bye
-
There is not much information in the doc around the new configuration of static file. Someone at - it an example of this dads.conf he file should look similar to static files? Everything else seems to work fine - it's my only hang up now.
Thank you!
Exact pop-up message:
There are problems with the configuration of static files in your environment. Please see the section "Configuration static file Support" in the Guide of the Installation Application Express
I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file... All is ready! It works! YAY!
-
Problems with Cisco 881, internet connection
I have a newly addedCisco 881 connected to a firewall, which is connected to the ADSL. We have added to the wireless and when wireless clients connect to the network (using standalone APs) they are capable of anything on the 192.168.88.0 network ping. They can also ping the firewall 10.0.88.1, but only because it is on the same network as port fa4. It seems to me like there is a problem with my default routes, but they look good, and I have tried different methods to do this. Here's the running-config on my 881, please help!
Wireless_881 #show run
Building configuration...Current configuration: 3679 bytes
!
! Last modification of the configuration at 15:45:48 UTC Friday, July 27, 2012
version 15.2
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname Wireless_881
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
Select the secret 4 Ng0lbQgI3BKsMMXv78pz6UP80gaDVrhUBQB3XKZMl3M
!
No aaa new-model
iomem 10 memory size
!
Crypto pki trustpoint TP-self-signed-1620898290
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1620898290
revocation checking no
rsakeypair TP-self-signed-1620898290
!
!
TP-self-signed-1620898290 crypto pki certificate chain
certificate self-signed 01
3082025A 308201 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363230 38393832 6174652D 3930301E 170 3132 30373132 31353431
30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36323038 65642D
39383239 3030819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100ED42 50BD2E07 D6A61E1C 7A8C236F 5499F47D 0FF2F1AC 23657162 66769F02
92921298 C4E68A84 B90B572D 300 C 6653 ADAB41F2 005F1544 122C99DF 16AA1F01
D3DC117D B92750F5 F6C2D4CE D6D173C5 A197E9C2 7B5EEF9B 4B2404BD D8243ABB
14EFF08B 21DE9D0A B11610EB 624E3B22 17BA1C73 60212253 DE86D7B8 EFD5771E
18B 90203 010001 HAS 3 8181307F 300F0603 551D 1301 01FF0405 30030101 FF302C06
03551D 73735F38 38312E70 616C6D65 74746F63 11 04253023 82215769 72656 C 65
6974697A 656E732E 6F726730 1 230418 30168014 BDFA0DBF FE8B72A7 1F060355
9B2D214C 466C1EDF 33D2FA3F 301D 0603 551D0E04 160414BD FA0DBFFE 8B72A79B
2D214C46 6C1EDF33 D2FA3F30 0D06092A 864886F7 010104 05000381 8100E0EF 0D
6D122A92 75ABE448 620EEDAD 131569 D 2 05BEB6D9 FA77DF2F 87FD464F 8111454F
CAE20CC2 580C8DC8 421065CD 31CF2F79 00722044 4B99E26A 5C48FD2D 2DCE835B
D0ADBD53 B768064B 9E4AB048 F0E9F751 11C9DA51 8EA9C1D3 DCEB136A EE3944D7
FD7EF038 DE965699 DAC4186F 3AAEBD85 B95F05D1 B3AF0BD5 566498 3 6424
quit smoking
!
!
!
DHCP excluded-address IP 192.168.88.1 192.168.88.10
!
PCFCU dhcp IP pool
network 192.168.88.0 255.255.255.0
router by default - 192.168.88.1
Server DNS 208.67.222.222
!
!
!
no ip domain search
IP domain name *.
IP cef
No ipv6 cef
!
!
license udi pid CISCO881-K9 sn FTX161080BP
!
!
username privilege 15 secret 5 mgaskin $1$ y8... $cCDIZqgRtHqBbsh36XW9d.
username privilege 15 secret 5 jlivingston $1$ Qs6L$ mhAtoKguqLmzmlfGbMYqW.
!
!
!
!
!
property intellectual ssh authentication-5 retries
!
!
!
!
!
!
!
!
!
interface FastEthernet0
switchport access vlan 880
no ip address
!
interface FastEthernet1
switchport access vlan 880
no ip address
!
interface FastEthernet2
switchport access vlan 880
no ip address
!
interface FastEthernet3
switchport access vlan 880
no ip address
!
interface FastEthernet4
IP 10.0.88.2 255.255.255.248
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
interface Vlan1
no ip address
!
interface Vlan880
IP 192.168.88.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
default IP gateway - 10.0.88.2
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source list 10 interface FastEthernet4 overload
network default IP 0.0.0.0
IP route 0.0.0.0 0.0.0.0 10.0.88.1
!
access-list 10 permit 192.168.88.0 0.0.0.255
not run cdp
!
!
!
Line con 0
line to 0
line vty 0 4
password 7 144F425C5D14292D273D6B657A46
opening of session
transport telnet entry
!
max-task-time 5000 Planner
!
endand if you disconnect the router announcement use pc directly to the firewall with ip 10.0.88.2 work?
-
I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.
1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.
2. cannot access other networks except the network associated with the inside interface natively.
3. I can not ping to the internet from inside, be it on the VPN or not.
I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.
Here is the config:
Output of the command: "sh run".
: Saved
:
ASA Version 8.4 (1)
!
hostname BVGW
domain blueVector.com
activate qWxO.XjLGf3hYkQ1 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 10
IP 5.29.79.10 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.1.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 172.19.1.1 255.255.255.0
management only
!
passive FTP mode
DNS server-group DefaultDNS
domain blueVector.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the subject of WiFi network
172.17.100.0 subnet 255.255.255.0
WiFi description
the object to the Interior-net network
172.17.1.0 subnet 255.255.255.0
network of the NOSPAM object
Home 172.17.1.60
network of the BH2 object
Home 172.17.1.60
the EX2 object network
Home 172.17.1.61
Description internal Exchange / SMTP outgoing
the Mail2 object network
Home 5.29.79.11
Description Ext EX2
network of the NETWORK_OBJ_172.17.1.240_28 object
subnet 172.17.1.240 255.255.255.240
network of the NETWORK_OBJ_172.17.200.0_24 object
172.17.200.0 subnet 255.255.255.0
DM_INLINE_TCP_1 tcp service object-group
port-object eq www
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
network-object BH2
network-object NOSPAM
Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group
Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0
mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source EX2 Mail2
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination
NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
!
the object to the Interior-net network
NAT (inside, outside) dynamic interface
network of the NOSPAM object
NAT (inside, outside) static 5.29.79.12
Access-group Outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1
Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1
Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1
Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1
Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1
Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server blueVec protocol ldap
blueVec AAA-server (inside) host 172.17.1.41
LDAP-base-dn DC = adrs1, DC = net
LDAP-group-base-dn DC = EIM, DC = net
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net
microsoft server type
Enable http server
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 inside
http 24.32.208.223 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
authentication crack
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 172.17.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 172.17.1.100 - 172.17.1.200 inside
dhcpd 4.2.2.2 dns 8.8.8.8 interface inside
dhcpd lease interface 100000 inside
dhcpd adrs1.net area inside interface
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
internal blueV group policy
attributes of the strategy of group blueV
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
value by default-field ADRS1.NET
internal blueV_1 group policy
attributes of the strategy of group blueV_1
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
adrs1.NET value by default-field
username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA
username gwhitten attributes
VPN-group-policy blueV
rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username
attributes of username rparker
VPN-group-policy blueV
username mhale encrypted password privilege 0 2reWKpsLC5em3o1P
username mhale attributes
VPN-group-policy blueV
VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password
username VpnUser2 attributes
VPN-group-policy blueV
Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password
username Vpnuser3 attributes
VPN-group-policy blueV
username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb
username VpnUser1 attributes
VPN-group-policy blueV
username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS
username dcoletto attributes
VPN-group-policy blueV
username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0
username jmcleod attributes
VPN-group-policy blueV
rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username
rhanna attributes username
VPN-group-policy blueV
username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk
username rheimann attributes
VPN-group-policy blueV
username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo
username jwoosley attributes
VPN-group-policy blueV
2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username
kdavis username attributes
VPN-group-policy blueV
username mbell encrypted password privilege 0 adskOOsnVPnw6eJD
username mbell attributes
VPN-group-policy blueV
bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username
bmiller username attributes
VPN-group-policy blueV
type tunnel-group blueV remote access
tunnel-group blueV General-attributes
address VPN2 pool
authentication-server-group blueVec
Group Policy - by default-blueV_1
blueV group of tunnel ipsec-attributes
IKEv1 pre-shablue-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
HPM topN enable
Cryptochecksum:2491a825fb8a81439a6c80288f33818e
: end
Any help is appreciated!
-Roger
Hey,.
Unfortunately, I do not use ASDM myself but will always mention things that could be done.
You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active
You have the following line under the "group policy"
Split-tunnel-policy tunnelspecified
You will also need this line
Split-tunnel-network-list value
Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?
To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT
VPN-CLIENT-PAT-SOURCE network object-group
object-network 172.17.200.0 255.255.255.0
NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE
In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work
I could myself try the following configuration of NAT
object-group, network LAN-NETWORKS
object-network 10.2.0.0 255.255.255.0
object-network 10.3.0.0 255.255.255.128
object-network 10.10.10.0 255.255.255.0
object-network 172.17.100.0 255.255.255.0
object-network 172.18.1.0 255.255.255.0
object-network 192.168.1.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.30.0 255.255.255.0
object-group, network VPN-POOL
object-network 172.17.200.0 255.255.255.0
NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL
Add ICMP ICMP Inspection
Policy-map global_policy
class inspection_default
inspect the icmp
or alternatively
fixup protocol icmp
This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.
-Jouni
-
Hi guys, I have a laptop Caompaq Presario CQ61-313us and I just installed windows 8.1, then I realized there was a problem with my Internet, every time, I opened a website, I always get either a page like this: http://imgur.com/0DtvP9X.png , or I get "error: Gateway Timeout", if I can get on the site if I update a little time , but it is extremely slow. In addition, I can't download anything, I tried to download the .NET Framework 3.5, through windows Update and Windows features, but in vain. I think this proves that the problem is not IE. I also think that it's the fault of the wireless driver, but I don't know, and I don't know which driver to download. I tried to update starting from the meny of properties, but he says that it is up-to-date. My wireless adapter is Qualcomm, Atheros AR9285 802. 11 b | g | n, V3.0.1.155.
Can anyone help?
Update: I think it is worth noting that when I download with utorrent, it downloads normally with my speed of regular download, but to share it, I can't download anything.
Hi Abdoice,
Thank you for your request, I will do my utmost to help.
I understand that you have improved your laptop to Windows 8.1 and now you have problems of WiFi connections.
HP has not tested your unit with Windows 8.1, so this could have unknown results.
If you try another browser is that the same problem?
You did all your Windows updates?
Have you tried running the built in Windows 8.1 troubleshooting tool?
Press the Windows key + C to open the charms
Troubleshooting Wireless type in the search bar and press ENTER.
Follow the instructions on the screen.
Here is a link to the Qualcomm Atheros Driver Downloads page to search for an updated driver. Atheros drivers Download Center
Please note that under the compatible software it does not list Windows 8.1 but only Windows 8.
I can suggest only you try.
There is an update of your system bios on the HP driver page, has it been done yet?
Drivers for laptop PC Compaq Presario CQ61-313US
Here is a link for troubleshooting wireless network and Internet (Windows 8)
Here is a document on download or update of software and drivers for HP computers.
You can omit the HP Support Assistant, it will only search updates HP and there is none for Windows 8.1 as stated previously and also the Manager of recovery for the same reason.
I hope this has helped.
-
problem with remote façade panels
Hello
I followed this tutorial
http://digital.NI.com/public.nsf/allkb/7F95D43D3F50FCAC8625710E000068E1
with a vi of examples
Everything seems correct, but when I connect to the application built with the browser, it get stuck with 0% load (see figure lissajous.png). Do a reload of the page I have crash plugin container (Fig. lissajous2.png). I get the same problem with exproler and firefox.
The stand alone application rus fine (lissajous1.png)
Sorry I made a mistake in the previous comment.
I add the other digits.
I don't know if this line in the err.log file is normal:
default: 3 pool.0 LVRFPHandler return dummy file
This means that the server sends a dummy file instead of the right?
Sincerely
Juan
PS: extract log file
GET /.LV_FrontPanelProtocol.rpvi110 HTTP/1.1
pool.0 request: 3 24236: default: is the service host
default: 3 pool.0 in LVAuthHandler::cloneHandler()
default: 3 pool.0 in LVAuthHandler::LVAuthHandler()
default: 3 pool.0 LVAuthHandler always match requests
default: 3 pool.0 in LVRFPHandler::cloneHandler()
default: 3 pool.0 in LVRFPHandler::LVRFPHandler()
default: 3 pool.0 in LVRFPHandler Setup()
default: 3 pool.0 LVRFPHandler handling request
default: 3 pool.0 LVRFPHandler return dummy file
pool.0 request: 3 24236: answer: >
HTTP/1.1 200 OK ^ M
Date: Thu, 11 Sep 2014 12:14:11 GMT ^ M
Server: Mbedthis-Appweb/11.5.0^M
Content-type: application/x-labviewrpvi110 ^ M
Content-length: 12 ^ M
Connection: keep-alive ^ M
Keep-Alive: timeout = 60000, max = 99 ^ M
^ M
default: 3 pool.0 in LVAuthHandler::~LVAuthHandler()
default: 3 pool.0 in LVRFPHandler::~LVRFPHandler()
pool.0 request: 3 24236: finishMaRequest: persistent attempt
httpServer:3 pool.0 new IPADDRESS connection for: 8000
pool.0 request: 3 24244: application of IPADDRESS:50980 to: 8000
pool.0 request: 3 24244: parseFirstLine:
-
Problem with the playback of an audio .asx file in Windows Media Player.
Hello
I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.
I get the following in a pop-up error message:
Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").
Help, please.
My email address is * address email is removed from the privacy *
Thank you.
-HimAlandi
Hello
1. facing this problem with the .asx format?
2. you remember to make changes to the system?
3. where is the file?Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.If you encountered this error by clicking a link on a Web page, the link isn't valid.If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").The following is a list of protocols supported by the player and the correct URL syntax examples:
(a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
(b) http://server/filename
(c) rtsp://server/filename
(d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.To configure the protocol settings
(a) in the Player Windows Media, on the Tools menu, click Options.
(b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
(c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.To rename the folder of information networking of player.
(a) close Windows Media Player. (To do this, on the file menu, click on exit).(b) to make the changes that you will be able to see the hidden files and folders
Show hidden files.
http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files(c) click Start, and then click computer.
(d) open the disc drive Local (c :)), open to users.
(d) open your user account.
(e) open %APPDATA%\microsoft\windows\sendto and open Local.
(f) open Microsoft and open Windows Media.
(g) click on the file and rename it.
(h) if the file is name12.0, edit as file name as old 12.
(i) restart the computer and check
Maybe you are looking for
-
Satellite M30 starts without activity LCD and HARD drive
The laptop LCD screen is blacked out to color and off suddenly while working normally.Now when I turn on the switch it starts but not display anything on the LCD screen and the hard drive activity indicator is also off. I went to the external display
-
T110-107 "this device can run faster.
Hi, when I move the lid I get the message "this device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas? Thank you
-
TCP/IP not listed sessions do not
I bought everything recently scrabble full so my friend and I can play together on a network... However when I host the game, the session never appears to her and vice versa... We have a set up wireless network I am on windows 7 home 64 bit and shes
-
"HP ePrint is unavailable at this time" error message on all connected HP eprinters
I have different devices on an IP address different addresses and all showed this error for 4 hours and print jobs are queued. Can you advise please?
-
Already, I have Vista Home Premium on my Toshiba laptop. It is not compatible with mini box m Pro Tools. Apparently, Vista Ultimate is compatible with Pro Tools. Windows 7 is not. How can I upgrade to Vista Ultimate?