TreeTable show like Top knot

Similar Questions

• White shows like glare and light colors like white

  Screen flickered then colors white shows like (too bright) glare and light colors show that whites. Brightness turned down to almost nothing and still no improvement. Test another monitor and even with that one

  If this happens on two different screens that work fine on another computer, then it is probably a problem with your video card.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you should definitely be for your video card and any other device you have time for - it can only help even if it is not helping to solve this particular problem), do leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, then it is probably a hardware problem with the video card and you may need to take to a computer repair shop (NOT Geeek Squad or one of these centers of department store) or go back to the manufacturer for repair.  If it's a PC, you can be able to do the replacement yourself if it's a separate card and is not part of the motherboard.  If it's a laptop don't even try not to do it yourself, get professional help.  If you have a spare video card that you can put into the computer rather than the one we think is bad, you should try first to see if it solves the problem.  If the problem goes away, then you know for sure it's a faulty video card.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.

• Where should I start a slide show like that?

  I'm looking to make or buy a slide show like this

  I watched Slideshow Pro but it does not seem to support the two features I like the most about the link above: fade out and sit down some way on top of the entire page (a slide show "mode" of the page) and support in varying proportions.

  General guidance would be appreciated, my first site.

  Hello

  The one in the link you provided is a prototype lightbox,- http://www.lokeshdhakar.com/projects/lightbox2/.

  But to create the same effect by using a dreamweaver extension see - http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1744525.

  PZ

• Qosmio G30-126 - how to hide/show the top bar?

  How active hide/show the top bar on the upper side desk, but disappeared how can I return it again?

  You want to have some Flash cards on top of the desktop computer?
  This isn't a problem

  In all programs-> Toshiba-> Utilities-> settings for Flash cards, you can activate this option!

  Check it!

• the sidebar calendar shows like orange, no date, month

  the sidebar calendar shows like orange, no date, month

  the sidebar calendar shows like orange, no date, month

  Double-click on an empty place.

• Programs open to showing only top left of the screen and some programs are huge

  origin: headache Visual, even to post this question

  I have a dell dimension 3000
  Win XP SP3

  I have a problem with my video in general: everything happens in my screen showing that only the upper left corner of the screen when I open my browser and components such as the windows Task Manager appear HUGE! (looks like it tries to run in multi-monitor mode sort - but the system has never put up for that, my cursor handles also away from the screen to my right and taskbar are low down and unable to increase... any suggestions?) I tried to play with the resolution settings, but that does not solve the problem

  (Sorry if post Q is in bad shape, this is my first post and visit)

  -Clark

  Well the reason why I think why your taskbar are cut is very likely due to the monitor settings. On your monitor, you should see a series of buttons. Try to play with them and watch the screen for something like auto or something in that sense. If you do not then you will need to manually change the horizontal and vertical positioning. There are several other settings for the width and height, etc.

  And a question, is the video driver installed on the system?

• Images showing only top 10 or so pixels

  A glance down the Board and it seems that this could be considered as oh another thread of image... but anyway.

  I have created an html page and assigned my section of website and the subtitle for h1 and h2 respectively. I then created a style sheet. The code is (copy and paste to the top of the stylesheet):

  @charset "UTF-8";
  H1 {width: 200;}
  height: 86;
  margin: 0;
  padding: 0;
  Background: url (.. / Images/websitetitle.png) no-repeat;
  text-indent:-9999px;
  }
  H2 {width: 130;}
  height: 24;
  margin: 0;
  padding: 0;
  Background: url (.. / Images/Subtitle.png) no-repeat;
  text-indent:-9999px;
  }

  Images not replaced it seems, but I don't see that as the top 10 pixels or more title. I tried to take dimensions leaving the image decide and that doesn't change. I tried to take a "no repeat" and the images disappear completely. I was violin and tried a few things like vertical-align, margin-botom, margin-top and other just to see if anything changes, but it's not.

  If I simply drag and drop images in design, visualize, and incorporate the style they appear and work fine, but I want this kind of things in the external sheet.

  I don't think I can upload as I don't have a lot that I build just the website, but perhaps more information would help so if you want to know...

  The HTML (Transitional 1.0), withdraws with validation but were not able to check the css. Any ideas?

  Edit: dreamweaver 11

  I am very pleased that you guessed it sorted.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• The Inbox can be set up so that the latest emails show the top of the Inbox instead of the other side round.

  I WANT THE LATEST E-MAILS INDICATE AT THE TOP OF THE LIST WITH INSTEAD OF THE OLDEST ON TOP.
  THANKS A LOT ANTHONY MARCH

  View (Alt - V) - sort by - Date - descending

• The Pro IPAD apple app doesn't show featured, top Charts or Explore - help

  My Apple App on my new IPad Pro running 9.3.2 IOS does not display pages Explore, Star, or Top Charts, just my purchase. Help.

  What have you tried so far? You have:

  -tried logging out and back in to your account on the iPad

  -closed the App Store app (I assume that "Apple App" means that the App Store) via the taskbar of the iPad

  -disconnected and reconnected to your network

  -do a soft-reset/reboot of the iPad

• First HP: Response to show like E3, E6, E-3

  Is it possible to get this calculator to always display the response as something of time 10 to 3, 6, 9 and so on?

  In other words, I want:

  0.00684 to display in the form of 6.84E - 3

  But I also want to:

  0.000684 to display in the form of 0.684E - 3

  instead of 6.84E - 4

  Another example:

  0.000000684 to display in the form 0.684E - 6

  instead of 6.84E - 5

  The reason is so that it will always be on a standard prefix mili, micro, kilo and so on.

  Select the number format (in host communities) of genius.

  It shows the numbers in a way that you need, with an exponent that is a multiple of 3

• Project shows like the unsaved whenever I open it

  I click on "save all the (this project)" before closing the window project and out of LabView. However, every time that I re-open the project, there is a * next to the title of the window, indicating that it has some components not registered.

  It lasts for quite awhile, and I wonder what is caysing it. Would be great if someone could explain it, it's on that maybe some of the "saves" are not in fact (?).

  Thank you

  Atul

  There are a few reasons.  Here's a long threadon this subject.

  1. There is an explanation that involves the use of classes.  I use class files, if this is not the explanation for me.

  2. one that I find, is much a simpler explanation.  If you have modified a Subvi in a way that modifies the dependencies (like calling an another sub - VI), this Subvi now appears in the dependencies section.  The LVproj wants to save the list of dependencies in the order that it is.  So now that you've added a Subvi, the structure of the project has changed enough in a way that triggers the asterisk "dirty point."

  I have kind of a nuisance.  As I didn't really need the dependencies recorded in any order.  And they are is recomputed anyway anytime, that the project opens, this is why the project changes immediately at the opening, it detects a dependency that wasn't there the last time that the .lvproj file has been saved.

• What is niorbmap? Shows like rootkit

  Hello

  Sorry I'm not sure where to post this as Im not sure what it refers to.

  I have the drivers (+ all that comes with them) installed for the NI USB-RS232 cable.

  Since hten, I did a scan quick rootkit using Spybot S & D who has informed me that the file C:\Windows\System32\niorbmap may be a possible rootkit infection. When I navigate to the location of the file is not visible - not a good sign.

  I assumed the name and something passing here on the forums that it's an OR related file.

  Could someone confirm this and if yes, explain why it can be detected as a rootkit?

  Thank you

  Hi Wolf99,

  This file looks like a part of our driver you mentioned. Take a look at my pc, I also have the file, it is located in C:\Windows\SysWOW64 (the equivalent of 64-bit system32) on my machine. Open the file with Notepad, it has many references to different software/drivers of OR. This file should not be malicous and is probably a false positive by Spybot S & D.

  Best regards
  Andrew

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.