First HP: Response to show like E3, E6, E-3

Similar Questions

• White shows like glare and light colors like white

  Screen flickered then colors white shows like (too bright) glare and light colors show that whites. Brightness turned down to almost nothing and still no improvement. Test another monitor and even with that one

  If this happens on two different screens that work fine on another computer, then it is probably a problem with your video card.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you should definitely be for your video card and any other device you have time for - it can only help even if it is not helping to solve this particular problem), do leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, then it is probably a hardware problem with the video card and you may need to take to a computer repair shop (NOT Geeek Squad or one of these centers of department store) or go back to the manufacturer for repair.  If it's a PC, you can be able to do the replacement yourself if it's a separate card and is not part of the motherboard.  If it's a laptop don't even try not to do it yourself, get professional help.  If you have a spare video card that you can put into the computer rather than the one we think is bad, you should try first to see if it solves the problem.  If the problem goes away, then you know for sure it's a faulty video card.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.

• Where should I start a slide show like that?

  I'm looking to make or buy a slide show like this

  I watched Slideshow Pro but it does not seem to support the two features I like the most about the link above: fade out and sit down some way on top of the entire page (a slide show "mode" of the page) and support in varying proportions.

  General guidance would be appreciated, my first site.

  Hello

  The one in the link you provided is a prototype lightbox,- http://www.lokeshdhakar.com/projects/lightbox2/.

  But to create the same effect by using a dreamweaver extension see - http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1744525.

  PZ

• the sidebar calendar shows like orange, no date, month

  the sidebar calendar shows like orange, no date, month

  the sidebar calendar shows like orange, no date, month

  Double-click on an empty place.

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

• have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Also in first CC transitions they are like those on Adobe Premiere CS6 as much as

  have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Transitions in first CC are also like those on Adobe Premiere CS6 can get 1 transition and then take multiple options as only a transitional option when I take the transmission of action... for example break glass I can also do several different transitions with in the glass break action transition

  Hi Willkutlass,

  I'm sorry but don't know what 'pat film' is. If it is a 3rd party effect/transition, you may have to pay for it.

  And the video transitions in Premiere Pro CS6 and first Pro CC are the same.

  Only difference, several transitions in CS6.

  

  Answer please, if you would like more information.

  Thank you

  Ilyes Singh

• Update of Lightroom CC November 2015: import format is back to normal, but after the first import, now it shows not all pictures on my card

  I * hated * the new import dialog box so actually have several cards which have just been collectible images in recent months.  I was so happy to hear that Adobe has put the old import returns with this version.  I've upgraded LR, jumped into one of my cards, was delighted to see the old format which shows me the destination directories and allows me to their collapse downwards, then uncheck the box.  Then I collapse all and select a date, choose metadata presets (location) and add keywords for this event and import.  Beautiful... so far now, in the next few days.  Or so I thought.

  I click Import the 2nd time, the card reader flashes for a bit, then stops - no image showing to import.  GMA

  -J' I doublecheck the setting of the "export map" - he did not review.  But I have reinstall the card anyway.  Nothing.

  -J' have check in Windows Explorer - Yes, a lot of ships there to import.

  -Well, maybe he thinks he imported, so I uncheck the "don't import suspected fooled no" (which used gray-just out them anyway)-nothing.

  -J' I quit and restart Lightroom.  Nothing.

  -J' I plug the card reader into a different USB port.  Nothing.

  Adobe WTF?  I have never seen this one before.  I'll reboot the PC right then, but thought I would ask if others see it too...

  Well, I'm distracted: my line "I have never seen anything like this before ' was BS.  6 months ago I * fact * see the solution and it was to switch the triangle next to folders to destination according to another thread.  Fortunately, just after the announcement, some screen I went to in the forums showed me my past behaviour, and there was the answer.  This bug is apparently still there - if your images to import will not be displayed, try clicking on the Panel of the destination folder on the right side of the dialog box and they'll pop right back in - they have just made for me.  I wish you to understand why this is happening and why they have not fixed.

• How can I specify the first directory when Thunderbird looks like to attach a file?

  I want to easily attach a file to a standard directory, so I want Thunderbird to look here first
  I specify an attachment for outgoing mail. Any suggestions?

  Thank you, finitarry. It was not clear that the backup
  location was also used for the location of reading.

• First episode of the show has been approved. How can I change the category of the show?

  I just realized the 1st category, I chose is not really suited for the show. I remember to choose the categories when I presented the feed.

  I have to return the stream in order to change the categories? Should I remove this particular episode before submitting it so that it didn't tell me the episode is already in iTunes?

  Is there anything else I should consider before trying this?

  Thank you.

  PS. I use Libsyn if that matters, but I don't think that.

  In your libsyn account go to 'Destinations' then click on 'Edit' for - Libsyn classic power - then change your category show here.

  Also be sure to fill in the other details on this page - and then click Save.

  iTunes update your category from 1 to 3 days.

  Rob W

  libsyn

• Project shows like the unsaved whenever I open it

  I click on "save all the (this project)" before closing the window project and out of LabView. However, every time that I re-open the project, there is a * next to the title of the window, indicating that it has some components not registered.

  It lasts for quite awhile, and I wonder what is caysing it. Would be great if someone could explain it, it's on that maybe some of the "saves" are not in fact (?).

  Thank you

  Atul

  There are a few reasons.  Here's a long threadon this subject.

  1. There is an explanation that involves the use of classes.  I use class files, if this is not the explanation for me.

  2. one that I find, is much a simpler explanation.  If you have modified a Subvi in a way that modifies the dependencies (like calling an another sub - VI), this Subvi now appears in the dependencies section.  The LVproj wants to save the list of dependencies in the order that it is.  So now that you've added a Subvi, the structure of the project has changed enough in a way that triggers the asterisk "dirty point."

  I have kind of a nuisance.  As I didn't really need the dependencies recorded in any order.  And they are is recomputed anyway anytime, that the project opens, this is why the project changes immediately at the opening, it detects a dependency that wasn't there the last time that the .lvproj file has been saved.

• What is niorbmap? Shows like rootkit

  Hello

  Sorry I'm not sure where to post this as Im not sure what it refers to.

  I have the drivers (+ all that comes with them) installed for the NI USB-RS232 cable.

  Since hten, I did a scan quick rootkit using Spybot S & D who has informed me that the file C:\Windows\System32\niorbmap may be a possible rootkit infection. When I navigate to the location of the file is not visible - not a good sign.

  I assumed the name and something passing here on the forums that it's an OR related file.

  Could someone confirm this and if yes, explain why it can be detected as a rootkit?

  Thank you

  Hi Wolf99,

  This file looks like a part of our driver you mentioned. Take a look at my pc, I also have the file, it is located in C:\Windows\SysWOW64 (the equivalent of 64-bit system32) on my machine. Open the file with Notepad, it has many references to different software/drivers of OR. This file should not be malicous and is probably a false positive by Spybot S & D.

  Best regards
  Andrew

• Clip + - Win XP - has worked at first, but now only shows connected, but no drive letter

  Yesterday I installed Sansa + 8 GB with success as well as Rhapsody and I could see the two drive letters for the Sansa. I loaded songs and played them.

  Today I can't see drive letters. Sansa appears as an icon on the desktop. As suggested, I tried uninstalling the driver under "Device Mgr" and windows reinstalled correctly.

  The Sansa itself device shows connected and I can browse the Sansa icon but my songs do not appear! On the Sansa itself, I can see my songs and that they play, but I can't load any more songs. Rhapsody does not see the device is of course.

  The suggestion of "drive letter conflict" will not work because I don't see ANY of the DRIVE LETTERS.

  Before I send it back, what else can I try?   Win XP SP3 update.

  Thank you

  jspence

  DrLucky - right on!  I just find this MSC/MTP switch to another solution.  Now I can copy in the Sansa as any other player, so I'll pass on Rhapsody.

  Thanks for the QUICK POST. I'll mark this corrected.

  jspence

• TreeTable show like Top knot

  12.1.3 Jdev

  I have an af:treetable under af:panelCollection.  It comes automatically with the "Display as Top" feature above the table of the tree once a node is selected, then click 'view as Top"icon, the selected node appears at the level of the root node.  This is a nice feature.  What is my requirment in order to receive the key to the previous page and then show the node of this key as node root.  How can this be achieved?

  Please notify.

  Thank you

  -Mina

  I found the solution.  Use setFocusRowKey on the treeTable.

• When you attempt to print to PDF extension shows like ps, why

  Recently, I had problems with trying to print PDFs of the documents created by others. I use comment tools and would like to make their 'uneditable '. Normally in the past, that I did it by printing the document to the pdf format, but for some reason lately any output file appears as a ps file? Looking at the original file, it seems that they have been drawn in the ps. Can I fix or what I have to go to the source of the file and ask them to create a PDF vs ps?

  I use Acrobat - 9 Standard, so maybe that's the question?

  Thank you

  In the print dialog box disable the entry "Print to File".

  With Acrobat Distiller, you can convert PS to PDF.